FMOUSE M501 Wireless Gaming Mouse for Laptop Ergonomic Bluetooth Mouse Instruction Manual
- May 15, 2024
- FMOUSE
Table of Contents
FMOUSE M501 Wireless Gaming Mouse for Laptop Ergonomic Bluetooth Mouse
Thank you for choosing FMOUSE M501 Bluetooth Wireless three-mode mouse Please read the manual carefully before using this product FMOUSE [email protected]
Product Function Diagram
Instructions
USB connection
Step 1: Plug the receiver into your computer’s USB port.
Step 2: Push the power switch at the bottom of the mouse to the “ON” and
switch the button © to 2.4G mode, the corresponding light is flashing green,
and then the green light off after connecting the device, 1 blue light on and
enter the normal mode. step3: Move the mouse or press the left/right button to
use it normally.
Bluetooth connection (BT1-BT2)
Step 1: Push the power switch at the bottom of the mouse to “ON”, click the
mouse three modes buttong, the blue lights corresponding to the BT1/BT2 mode
flashes, and start to enter the code mode.
Step 2: Open the tablet/computer/phone, click the “Bluetooth” interface in the
settings menu, Connect the pairing mouse (BT5.1Mouse). After the device is
connected, the blue light goes off, blue light is on, and the normal mode is
entered. step3: Move the mouse or press the left/right button to use it
normally.
Three-mode Switching Method
If the mouse is connected to three devices, you can press the three-mode
switch button © to be flexible among the three devices Switch, the
corresponding light will be on and flicker, then off, the device can work
normally.
Charging Method
It is recommended to use the computer USB interface to charge the mouse. When
charging, the LOGO light will breathe in red light. Fully charged, green light
on, about 1 to 2 hours.
Battery Warning
When the mouse is about to run out of power, the LOGO light flashing red alarm
indicator.
Product parameters
Instructions and precautions for use
- When the mouse cursor moves slowly, check whether the battery is low. Suggest timely charging
- If the mouse cannot be connected, check whether the power switch at the bottom of the mouse is on and select a correct connection mode or move the USB receiver to another USB port.
- If you do not use the mouse for a long time, manually turn off the power switch to save power.
- If you do not use the mouse for a long time, it will automatically enter the sleep mode, move the mouse or press any key to wake up the mouse.
- Please do not remove or try to repair the product, because doing so may cause damage.
- Power saving mode: Please long press the bottom switch for 2 seconds to turn off the LOGO light, so you can save the power of the battery.
Easy Manual
DPI Functions
LED Instruction
Receiver Description
Read Manual Before product Use.
- BATTERY WARNING! Improperly replaced batteries may present a risk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54°C (130° F).A battery subjected to extremely low air pressure may result in an explosionor the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to ocal laws. If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children.
- Class 1 Laser product: This product complies with International Standards IEC/EN 60825-1: 2014, Class 1 Laser product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Maximum power of 716 microwatts CW, Emitted wavelength is 832-865 nm; Operating temperature between 0°C and 40°C.
- WARNING! Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposure.
- WARNING! Avoid prolonged direct eye and/or skin contact with the laser aperture May result in potential burn injury.
- The product contains Class 1 LED. Operating temperature between 0°C and 40°C.
- Class 1M Laser product: This device complies with International Standard LEC/EN 60825-1:2014,Class 1M Laser product, and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated
- May 8, 2019. Emission of diverging beam of minimum +/-2° of infrared user-invisble light; Maximum power of 1,4 milliwatts CW, Emitted wavelenght is 832-865 nm;
- Operating temperature between 0°C and 40°C.
- WARNING! Laser Radiation. Viewing the laser output with magnifying optical instruments within a 100mm distance may pose an eye hazard.
Use Guidelines-Safe & Proper Use of Your Product:
- Do not open or modify the product except for battery removal and replacement.
- Do not disassemble or attempt to service this product because there is a risk of radiation exposure, which could injury you.
- Do not direct the infrared/laser beam at anyone>s eye or a reflective object.
- Do not immerse product in any liquid or expose to heat or moisture.
- If the product is exposed to out-of-range temperature environments, power off the device until temperature has stabilized within the specified operating temperature range.
- Use only provided power supply devices with this product.
- Do not modity the power supply. Do not charge your product during an electrical storm.
- Use the product with listed/certified ITE computers and accessories.
- This is not a Children>s Product and is not intended for use by children under 14 years old.
- Long periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands, wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, weakness, swelling, burning, cramping, or stiffness.
- This product is safe under normal any reasonably foreseeable misuse operating conditions. If the product is operating improperly, contact support. product must be returned or any service or repair.
- Any changes or modifications to the product that are not expressly approved may void the user’s authority to operate the equipment and your warranty. / Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase.