FMOUSE M133 Transparent 2.4G Wireless Bluetooth User Manual

FMOUSE M133 Transparent 2.4G Wireless Bluetooth User Manual

Product Function Diagram

Instructions

USB connection
Step 1: Plug the receiver into your computer’s USB port.
Step 2. Push the power switch at the bottom of the mouse to the “ON”, and switch the button 11 to 2.4G mode, the corresponding light is flashing green, and then the green light off after connecting the device, enter the normal mode.
Step 3: Move the mouse or press the left/right button to use it normally

Bluetooth connection (BT1-BT2)
Step 1: Push the power switch at the bottom of the mouse to “ON”, click the mouse three modes button 11 , the blue lights corresponding to the BT1/BT2 mode flashes, and start to enter the code mode.
Step 2: Open the tablet/computer/phone, click the “Bluetooth® interface in the settings menu, Connect the pairing mouse (BT5.1Mouse). After the device is connected, the blue light goes off, Enter normal mode.
Step 3: Move the mouse or press the left/right button to use it normally.

Three-mode Switching Method

If the mouse is connected to three devices, you can press the three-mode switch button 11 to be flexible among the three devices Switch, the corresponding light will be on and flicker, then off, the device can work normally

Charging Method

It is recommended to use the USB interface of the computer to charge the mouse. When the mouse is charged, the battery light at the front of the 6 cell flashes. The 6  battery light is always on when fully charged.

Battery Warning

When the mouse is about to run out of power, the last bar of the 6 battery light flashes an alarm prompt

Product Parameters

Instructions and precautions for use

1. When the mouse cursor moves slowly, check whether the battery is low. Suggest timely charging
2. If the mouse cannot be connected, check whether the power switch at the bottom of the mouse is on and select a correct connection mode or move the USB receiver to another USB port
3. If you do not use the mouse for a long time, manually turn off the power switch to save power.
4. If you do not use the mouse for a long time, it will automatically enter the sleep mode, move the mouse or press any key to wake up the mouse.
5. Please do not remove or try to repair the product, because doing so may cause damage.

LED Instruction

Easy Manual

Receiver Description

Open top cover Take out receiver

Read Manual Before product Use

BATTERY WARNING! Improperly replaced batteries may present a tisk of leak or explosion and personal injury. Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure batteries are installed correctly by following the instructions provided. Mistreated rechargeable batteries may present a risk of fire or chemical burn. Do not disassemble or expose to conducting materials, moisture liquid, or heat above 54°C (130° F)A battery subjected to extremely low air pressure may result in an explosionor the leakage of flammable liquid or gas. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods. Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable. Battery life varies with usage. Non-operational batteries should be discarded according to local laws. It no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children.

Class 1 Laser product: This product complies with International Standards IEC/EN 60825-1:2014, Class 1 Laser product and also complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 4, 2019, Maximum power of 716 microwatts CW, Emitted wavelength is 832-865 mm Operating temperature between 0°C and 40°C.

WARNING! Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposure

WARNING! Avoid prolonged direct eye and/or skin contact with the laser aperture May result in potential burn injury. temperature between 0°C and 40°C.

The product contains Class 11 LED: Operating temperature between 0°C and 40°C.

Class 1M Laser product : This device complies with International Standard LEC/EN
60825-1:2014,Class IM Laser product, and also complies with 21 CFR 1040 10 except for conformance with IEC 60825-1 Ed. 3. as described in Laser Notice No. 56, dated May 8, 2019 Emission of diverging beam of minimum+/-2° of infrared user-invisible light Maximum power of 1.4 milliwatts CW, Emitted wavelenght is 832-865 nm Operating temperature between 0°C and 40°C.

WARNING! Laser Radiation. Viewing the laser output with magnifying optical instruments within a 100mm distance may pose an eye hazard

Use Guidelines-Safe & Proper Use of Your Product

• Do not open or modify the product except for battery removal and replacement.

• Do not disassemble or attempt to service this product because there is a risk of radiation exposure, which could injury you

• Do not direct the infrared/ser beam at anyone’s eye or a reflective object

• Do not immerse product in any liquid or expose to heat or moisture

• If product is exposed to out of range temperature environments power off the device until temperature has stabilized within the specified operating temperature
  range

• Use only provided power supply devices with this product. Do not modify the power supply.

• Do not charge your product during an electrical storm

• Use the product with listed/certified ITE.computers and accessories

• This is not a Childrens Product and is not intended for use by children under 14 years old

• Long periods of repetitive inotion using the product may be associated with nerve tendon or muscle injury in your hands, wrists, arms, shoulders, neck or back. See a qualified health professional for pans, numbness, weakness, swelling, burning camping or stiffness

• This product is safe under natimal any reasonably foreseeable misuse operating conditions. If the product is operating improperly, contact support product must be returned or any service or repair

• Any changes or modifications to the product that are not expressly approved may void the user’s authority to operate the equipment and your warranty.

Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point to enable recycling and avoid potential impacts on the environment and human health. For more information, contact your local authorities or place of purchase.

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>