OLIXIS D-F02BC-40IN Home Office Desk With Drawers Instruction Manual
- May 15, 2024
- OLIXIS
Table of Contents
OLIXIS D-F02BC-40IN Home Office Desk With Drawers
Component List
-
Desktop Board
-
Splice Board
-
Left Leg Frame
-
Drawer Left Frame
-
Fixed Frame
-
Inclined Reinforcement Tube
-
Lower Panel
-
Connector Tube
-
Drawer Right Frame
-
Drawer Rear
-
Reinforcement Tube
Supplied Parts and Hardware
-
M6x30mm Screws
-
M6x16mm Screws
-
Hook
-
Wrench
Step 1
Install Fixed Frame (E) to the Left Leg Frame (C) with Screws *(1)2.**
Step 2
Install Connector Tube (H)4 to the Drawer Frames (D &I) with Screws (1)8.
Step 3
With Screws *(1)4, install Fixed Frame (E) Part to the Drawer Left Frame (D) Part, and then install Rear Reinforcement Tube (K) to the bottom of the Left Leg Frame (C) and Drawer Left Frame (D).**
Step 4
Install Desktop Board (A) to the installed frame with Screws (1)6. Two Screws (1)2 need to pass through the Inclined Reinforcement Tube *(F)2** before installation.
Step 5
Install Inclined Reinforcement Tube (F)2 to the Left Leg Frame (C) and Drawer Left Frame (D) with Screws (2)2 and install Lower Panel (G) to the Connector Tube (H)2 with Screws (1)4.
Step 6
With Screws (1)4, install Splice Board (B) to the Connector Tube (H)2
NOTE
- When installing the table panel (B), it is necessary to align it with the holes on the steel frame, as the spacing between the holes on both sides of the table panel (B) is different, and misalignment can lead to deviation in installation.
Step 7
Put Drawer *(J)2 into Drawer Frames (D &I).**
Step 8
Attach Hook (3) to the Left Leg Frame (C) with Screw (2).
Customer Support
HJ-Customer-Service@outlook.com
(909)637-7665 | (909)637-7593 D-F02BC-40IN D-F02BC-47IN D-F02BC-55IN
EST 9:00AM–17:00PM
Technical Support
(909)637-7665 | (909)637-7593
Other Info
HJ-Customer-Service@outlook.com
Thank you for choosing this product. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.