OLIXIS C-2193 Armless Home Office Desk Chair Instruction Manual
- June 14, 2024
- OLIXIS
Table of Contents
- OLIXIS C-2193 Armless Home Office Desk Chair
- Product Information
- Safety Information
- Package List
- Assembly Instructions
- Product Usage Instructions
- Safety Information
- Package List
- Assembly Instruction
- Instructions For Use
- ABOUT COMPANY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OLIXIS C-2193 Armless Home Office Desk Chair
Product Information
Model | C-2193 |
---|---|
HJ-Customer-Service@outlook.com | |
Phone | (909)637-7665 |
Safety Information
- Sit in the center of the chair, with your back to the backrest.
- Do not sit at the front edge of the chair.
- Do not stand on the chair.
- Do not use the chair with more than one person.
- Do not push the chair around when a person is sitting in it.
- Do not push down on the backrest when a person is reclined.
- Do not place all your weight on only the backrest.
Package List
Item | Quantity |
---|---|
Backrest (A) | 1 |
Seat (B) | 1 |
Back bar (C) | 1 |
Mechanism (D) | 1 |
Gas Lift (E) | 1 |
Base (F) | 1 |
Legs (G) | 5 |
Casters (H) | 5 |
Bolts (I) | 4 |
Bolts (J) | 4 |
Bolts (K) | 10 |
Bolts (L) | 2 |
Wrench (M) | 1 |
Assembly Instructions
Follow the steps below to assemble the chair:
- Turn the Base (F) upside down, insert the Legs (G)5 into the Base one by one. Use the Wrench (M) to secure both with Bolts (K)10.
- Press Casters (H)5 into the holes at the end of Legs (G)5.
- Insert the Gas Lift (E) into the Base (F).
- Using the Wrench (M), install Back bar (C) to the Backrest (A) with Bolts (L)*2.
- Turn the Seat (B) upside down. Using the Wrench (M), install Mechanism (D) to the Seat with Bolts (I)*4.
- Using the Wrench (M), attach Backrest with back bar to the Seat (B) with Bolts (J)*4.
- Align the hole on Mechanism (D) with Gas Lift (E) and press the Chair down until it is fully secured.
- Finish the installation.
Product Usage Instructions
Follow the instructions below for proper usage of the chair:
- Before using the chair, check to ensure that all bolts are fully tightened. * Lubricate all parts and tighten all bolts every 6 months or whenever needed.
- To deodorize the leather, leave the chair in a shady outside area for 1-2 days.
- Re-tighten bolts every 6 months by using the enclosed allen-key. *Using an electric drill can damage the chair. Please re-tighten bolts manually.
Safety Information
-
To deodorize the leather leave the chair in a shady outside for 1-2 days.
-
For longer use
- Re-tighten bolts every 6 months by using the enclosed allen-key.
- Using an electric drill can damage the chair. Please re-tighten bolts manually.
-
Sit in the center of the chair with your back against the backrest
-
Do not sit at the front edge of the chair
-
Do not stand on the chair
-
Do not use the chair with more than one person
-
Do not push the chair around when a person is sitting in it.
-
Do not push down on the backrest when a person is reclined
-
Do not place all your weight on the backrest only
Package List
Assembly Instruction
-
Turn the Base (F) upside down, insert the Legs (G)5 into the Base one by one. Use Wrench (M), secure both with Bolts (K)10.
-
Press Casters (H)5 into the holes at the end of Legs (G)5.
-
Insert the Gas Lift (E) into the Base (F).
-
Using Wrench (M), install Back bar (C)to the Backrest(A) with Bolts(L) *2
-
Turn the Seat (B) upside down . Using Wrench (M), install Mechanism (D) to the Seat with Bolts(I) *4.
NOTE:
The Mechanism (D)is marked with “FRONT”, please make sure the installation direction is correct. -
Using Wrench (M), attach Backrest with back bar to the Seat (B) with Bolts (J) *4.
-
Align the hole on Mechanism (D) with Gas Lift (E), and press the Chair down until it is fully secured.
-
Finish the installation.
Instructions For Use
CAUTION:
- Before using the chair, check to ensure that all bolts are fully tightened.
- Lubricate all parts and tighten all bolts every 6 months or whenever needed.
ABOUT COMPANY
- HJ-Customer-Service@outlook.com
- (909)637-7665
- (909)637-7593