RAPTOR Exterior Light Clips Instruction Manual
- May 15, 2024
- RAPTOR
Table of Contents
RAPTOR Exterior Light Clips
Product Information
Specifications
- Product Name : Exterior Light Clips
- Compatibility: #8 screws or smaller
- Usage: Hanging lights on gutters
Product Usage Instructions
Installation Help
Installing the Exterior Light Clip Screws
Using a drill, install the exterior light clip screws to the front lip of the gutter at the desired spacing for hanging lights. If screws are already installed on the front lip of the gutter and are #8 or smaller, simply replace them with the Exterior Light Clip Screws and add any additional screws necessary for desired spacing.
GAP
For proper performance, install screws straight and do not over-tighten. Once installed, there should be a small gap below the round washer head of the screw for the clip to attach.
Attaching the Exterior Light Clips:
Press firmly on the clip until it snaps around the screw. For a tighter fit, press the clip until the second hole of the clip wraps around the screw.
Hanging Your Lights:
Option 1: Lay the entire braided light strand cord into the hook of the clip and gently press it into place.
Option 2: Gently separate one cord from the braided light strand and insert it into the hook of the clip.
Contact Us
- Phone: 866-483-8166 (M-F 8 am-7 pm CST)
- Email: customersupport@gutterglove.com
- Website: gutterglove.com/lightclips
FAQ
- Q: Can I reuse the Exterior Light Clip Screws?
- A : It is recommended to use new screws for optimal performance. Reusing screws may compromise the stability of the clips.
- Q: What is the maximum weight each clip can hold?
- A : The maximum weight capacity per clip is X pounds. Ensure not to exceed this limit to prevent damage to the clips or gutters.
Installation
Installation Help
Installing the Exterior Light Clip Screws Using a drill, install the exterior
light clip screws to the front lip of the gutter at the desired spacing for
hanging lights. If screws are already installed on the front lip of the gutter
and are #8 or smaller, simply replace them with the Exterior Light Clip Screws
and add any additional screws necessary for desired spacing.
For proper performance, install screws straight and do not over tighten. Once
installed, there should be a small gap below the round washer head of the
screw for the clip to attach.
Attaching the Exterior Light Clips
Press firmly on the clip until it snaps around the screw. For a tighter fit,
press the clip until the second hole of the clip wraps around the screw.
Hanging Your Lights
- Option 1: Lay the entire braided light strand cord into the hook of the clip and gently press it into place.
- Option 2: Gently separate one cord from the braided light strand and insert it into the hook of the clip.
Contact
- 866-483-8166 M-F 8 am-7 pm CST
- customersupport@gutterglove.com
- gutterglove.com/lightclips