Xinfeng 2d 4E11314G01 Air Purification Device User Manual
- June 6, 2024
- Xinfeng 2d
Table of Contents
Xinfeng 2d 4E11314G01 Air Purification Device
Description
Graphene-enhanced photocatalytic oxidation process produces high volume of hydroxyl groups that have been proven to degrade VOC (volatile organic compounds) and kill airborne bacteria and viruses.
Unique technology: Graphene-enhanced Photocatalytic Oxidation
Exploded view of Module A
Specification
| Description | Air Purification Device |
|---|---|
| Part Number | 4E11314G01 |
| Size | Length 534mm x Width 165mm x Depth 25.4mm |
| Voltage | Max 35V Typ 24V Min 20V Condition DC |
| Current | Max 2.4A Typ 2.1A Min 1.9A Condition 24V |
| Power | Max 58W Typ 51W Min 44W Condition 24V |
| Weight | N.W 1450g |
The temperature of the test environment is 28 degrees Celsius, and the equipment is ventilated normally.
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications or changes to this equipment. Such
modifications or changes could void the user’s authority to operate the
equipment. NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>