Kitette DryBox 2000 Dual Semiconductor Dehumidifier User Manual

Kitette DryBox 2000 Dual Semiconductor Dehumidifier

TECHNICAL REQUIREMENTS

1. Color box&paper card: material and size should be according to document requirements, the size of the finished product deviation within 2-3mm requirements;
2. Carton: material and size should be according to document requirements, the size of the finished product deviation within plus 5-10mm requirements;
3.  PE foam: the bonding place of PE foam should be smooth, the glue should be even, the size of the finished product deviation within 2-3mm requirements;
4. Manual, warranty card, label, album and other printing materials must meet the inspection requirements of the quality department;

Details of all packaging materials can be compared with : Inspection guide for incoming materials of packaging cartons – document No. : YWT-ZY-PZ-26

CD The printed contents, patterns and fonts shall meet the requirements of drawings or sealed samples, and the patterns shall be clear, full, no decolorization and obvious overflow edge; and the position shall be accurate, horizontal deflection is not allowed to exceed 5mm, pattern shall be consistent color, good ink adhesion, and not decolorizing with fingers ;
@ Packing materials must have protective measures and are not allowed to damage their outer surface due to packaging and transportation.

IMPORTANT SAFETY INFORMATION

1. Please make sure the specified line voltage is the same as your power grid.
2. Please do not operate the device if there is any damage to the power cord, power plug or the device. Please contact seller.
3. DO NOT place the dehumidifier near curtains or similar items that can be easily sucked.
4. Please do not use the dehumidifier in an easily flammable or explosive environment The ambient temperature should not exceed 40°C. The dehumidifier works best at a room temperature of l5-40°C.
5. Please unplug the power cord from the wall outlet if you don’t use the device for a long time. SAFETY INSTRUCTIONS
6. Do not bend or pull power cord to avoid bad contact.
7. Please only use the device on flat, stable surfaces. And do not tilt the device.
8. DO NOT cover the dehumidifier. To avoid overheating due to poor ventilation.
9. Do not pull out the power plug when your hand is wet.
10. When the machine is running, don’t use tools such as thin stick to clean the machine to avoid malfunction.
11. It is not a toy, please keep away from children.
12. DO NOT clean with gasoline, alcohol and the organic detergent.
13. DO NOT use the dehumidifier in low temperature, dusty or volatile acid, alkali and oil environ­ment.
14. It is forbidden to exchange the non-matching adapter without authorization.
15. It is forbidden to disassemble and modify the adapter and all parts of the machine without permission

WARRANTY INFORMATION

• We appreciate your feedback and offer you the best service.
• Should return the product within l year of purchase have defects, we will grant you one refund or send you a new one. You’re welcome email us your order number or contact us the seller on Amazon. Your requests will be like this processed as soon as possible.

Important : For the following situations, our company refuses any liability from:

1. For orders not placed by an authorized Amazon store or an official website.
2. For damage caused by misuse of Buyers arise. and normal wear and tear of the machine.

EXTEND YOUR WARRANTY BY 1 YEAR

Register your product at www.kitette.com to extend your l-year warranty by an additional year. Please fill out all required fields and include your order ID, place of purchase, and purchase date, if applicable.

GETTING TO KNOW YOUR DEHUMIDIFIER

1. Button
2. Remote control
3. Air outlet
4. Handle
5. Airinlet
6. Bucket cover
7. Bucket
8. Visual window
9. Water plug ( of bucket )
10. Rubber hose

SPECIFICATION

CONTROL PANEL

REMOTE CONTROL OPERATION PANEL

• CR2025 button battery included
• The buttons on the remote control are used in the same way as the buttons on the panel.

OPERATION

Do not cover the air outlet and air inlet, otherwise it will affect the dehumidification efficiency

REMOVING THE COLLECTED WATER

1. Use the bucket
   When the bucket is full, remove the bucket and empty it. NOTE

   • When the bucket is full, the light will turn red and the dehumidifier will stop.
   • When the bucket is not placed correctly, the red light flashes.
   • When you don’t need to use the dehumidifier, keep the water tank dry and cut off the power link.

2. Continuous draining
   Before starting the machine, pull out the water plug of the bucket, connect the hose, and drain the water directly through the hose without taking out the bucket.

NOTE

• Make sure the connection is tight and there is no leaking.
• The drainage facilities should be lower than the drain of the dehumidifier, and be sure to run the water hose sloping downward.
• When not using continuous drainage, insert a water plug to prevent water leakage.
• Do not use a continuous drain when the temperature is at or below 32°F ( 0°C) or it will freeze and block the water pipes.

CARE & MAINTENANCE

WARNING : Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.
Clean the dehumidifier with water and mild detergent. Do not use bleach or abrasives.

1. Clean the Grille and case

   • Do not splash water directly onto the main unit Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust
   • The air intake and outlet grilles get soiled easily. Use a vacuum attachment or brush to clean.

2. Clean the bucket
   Clean the bucket with water and mild detergent every two weeks.

3. Storing the dehumidifier

   • After turning off the dehumidifier, wait a day until the inside of the dehumidifier and the water tank are dry.

   • Store the dehumidifier upright in a dust-proof, dry, well-ventilated place.

   • After turning off the dehumidifier, wait one day until all water in the internal of the
     dehumidifier flows into the bucket, and then empty the bucket.

   • Clean the main dehumidifier, bucket.

   • Wrap the cord and bundle it with the band.

TROUBLESHOOTING

service@kitette.com

EUBRIDGE ADVISORY GMBH Virginia Str. 2 35510 Butzbach,Germany eubridge@outlook.com
TANMET INT’L BUSINESS LTD 9 Pantygraigwen Road, Pontypridd, Mid Glamor – gan, CF37 2RR,UK tanmetbiz@outlook.com

Manufacture: Guangdong Invitop Technology Co., Ltd. Address: 2F-201& 3F, Area Al, Minsen Information Technology Industrial Park, No.8, East of Jinsan Avenue, Sanjiao Town, Zhongshan, Guangdong. DryBox 2000 EU-SMS-20220223-VOI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>