iTouch Wearables TP4R01 Sport 4 Locate the watch and charging User Guide

May 15, 2024
iTOUCH WEARABLES

iTouch Wearables TP4R01 Sport 4 Locate the watch and charging

iTouch-Wearables-TP4R01-Sport-4-Locate-the-watch-and-charging-
PRODUCT

Product Information

Specifications

  • Model: TP4R01/TP4E01
  • Charging Time: Up to 2 hours
  • Charging Cable: Magnetic with metal pins
  • App: Free mobile app available for download

Pair Your Watch

  • Power on the watch by pressing and holding the side button for 5 seconds. Open the mobile app, create an account, then tap the watch icon to begin pairing.
  • Pairing sets the time and date on your watch. Enable Bluetooth on your phone but only pair your watch using the mobile app.

Visit Us Online

FAQ

  • Q: How long does it take to fully charge the watch?
  • A: Charging can take up to 2 hours.
  • Q: Can I use fast chargers to charge the watch?
  • A: It is recommended to avoid using fast chargers.
  • Q: Where can I download the mobile app?
  • A: You can scan the QR code provided with your smartphone camera to download the free mobile app.

UNPACK CONTENTS

  • Locate the watch and charging cable inside the box.

CHARGING

  • Insert the cable into a computer USB port or UL-certified wall charger.

Note: avoid using fast chargers.

FULLY CHARGE WATCH

  • Line up the metal pins on the charging cable with the contacts on the back of the watch and lower until it snap into place.
  • Charging can take up to 2 hours
  • The magnetic charging cable snaps into place.
  • A charging screen will appear to confirm your watch is charging.

DOWNLOAD APP

  • Scan the QR code with your smartphone camera to download our free mobile app.

PAIR YOUR WATCH

  • Power on the watch (press and hold the side button for 5 seconds), open the mobile app, create an account, and then tap the watch icon to begin pairing. Pairing sets the time and date on your watch.

Note: enable Bluetooth on your phone but only pair your watch using the mobile app.

FCC STATEMENT

FCC REGULATORY COMPLIANCE

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no –- guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and rece/ver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

BATTERY WARNING

Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
Disposal of a battery into a fire or a hot oven,or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

  • Operating temperature:
  • Charging: 0°C – 45°C
  • Discharging: -10°C ~ 60°C

E-LABEL NAVIGATION

The e-label can be found in the Information section of your device’s settings.

  • Open up Settings page
  • Select Regulatory Information
  • View e-label for product and compliance information.

FCC ID: 2AJXA-TP4

  • Product: Smart Watch
  • Model No: TP4R01/TP4E01

VISIT US ONLINE

For the full user manual, help, and answers to many common questions, visit us online: support.itouchwearables.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals