SCS sentinel HCN0023 Elektro Prog Outdoor Weekly Electronic Outdoor Timer Instruction Manual

ElektroProg OUTDOOR
Weekly electronic outdoor timer

Please read the following instructions carefully before connecting this timer to electrical appliances and keep during warranty limit.
Don’t plug in an appliance where the load exceeds 16 Amp and/or 3600W. Always ensure the plug of any appliance is fully inserted into the timer outlet. If cleaning of the timer is required, remove from mains power and wipe timer with a dry cloth.
Do not immerse timer in water or any other liquid. Heaters and similar appliances should never be left unattended during operation.

Keyboard definition

a- MASTER CLEAR: Clear all data in memory including current time and all programs.
b- RANDOM: Set or cancel random function.
c- CLOCK: Set current time combined with buttons WEEK, HOUR, MIN. Select 12 or 24 hour mode combined with button TIMER. Activate summertime function combined with button ON/AUTO/OFF.
d- TIMER: Set programs combined with buttons WEEK, HOUR, MIN. Select 12 or 24 hour mode combined with button CLOCK.
e- ON/AUTO/OFF: Select operating modes of timer.
f- WEEK: Set week combined with button CLOCK or TIMER.
g- HOUR: Set hour combined with button CLOCK or TIMER.
h- MIN: Set minute combined with button CLOCK or TIMER.
i- RST/RCL: Override programs or recall the overridden programs.

General features

1. Water proof cover(IP44).
2. 10 ON/OFF programs.
3. ON/AUTO/MANUAL OFF modes selectable.
4. 12/24 hour mode selectable.
5. Large LCD display with hour/minute/second.
6. Summertime function available.
7. Random function
8. 16 combinations of day or blocks of days available

Initial operation

1. Plug the timer into a regular 230 Volts power outlet and turn the power on. Leave for approximately 14 hours to charge the memory back-up battery.
2. Clear all current information by pressing MASTER CLEAR button with a sharp object such as a pen or pencil after charging.
3. The timer is now ready to be set up for use.

Setting current time

1. Press CLOCK button and hold, simultaneously press WEEK button until the actual day is displayed.
   Then release. Continue  by pressing HOUR or MIN button until the current hour or minute is displayed.

2. In case of problem, repeat this setting operation.

Setting programs

1. Press TIMER button and release. LCD shows ON_1.

2. Press WEEK button to set the day or block of days. Set the time by pressing HOUR and MIN button.

3. Press TIMER button again to finish the first ON setting and enter into the first OFF setting. LCD shows OFF_1.
   Make the first OFF setting.

4. Press TIMER button again to finish the first OFF setting then set the time by pressing HOUR and MIN buttons.

5. After completing settings, press CLOCK button. The timer is ready to operate.

6. Repeat above 1 to 4 steps to set 2 to 10 programs

ON/AUTO/OFF modes

Operating modes can’t be changed during program settings.

1. Press ON/AUTO/OFF button to revert the three modes in turn.

2. The programs can only be executed in AUTO mode.
   When AUTO is selected, the timer operates as the programs. In MANUAL ON or MANUAL OFF mode all programs are ignored and the timer doesn’t operate.
   When MANUAL ON mode is selected, power output is always ON. When MANUAL OFF mode is selected, power output is permanently off.

3. When the mode is turned from MANUAL ON to AUTO, the timer will keep the setting of MANUAL ON until to the next timer setting.

Random function

1. Press RANDOM button. LCD displays R (RANDOM). RANDOM function is activated.
2. When this function is ON, the settings will be executed every 30 minutes between 6:00 PM and 6:00AM.
3. Press the RANDOM button again to cancel thisfunction.

12/24 hour mode
Hold CLOCK and press TIMER to switch to 12 or 24 hour mode.

Summertime function

1. Press CLOCK and ON/AUTO/OFF simultaneously. LCD shows S (Summertime). Clock advances 1 hour.
2. To revert to winter setting, press the two buttons again. Clock moves backward 1 hour. S disappears in LCD.

Specifications

Voltage : 230VAC, 50Hz
Max Load : 16A, 3600W
Min Setting Time : 1 Minute
Operating temperature : -10 °C to +55 °C
Battery backup : NiMH 1.2V >100hours

For an individual answer, use our online chat on our website www.scs- sentinel.com

References

• Solutions en motorisation de portail, carillon, interphone et vidéosurveillance pour votre maison - SCS Sentinel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>