SCS sentinel Visio Bell Connected Doorbell Kit Instruction Manual
- May 15, 2024
- SCS sentinel
Table of Contents
SCS sentinel Visio Bell Connected Doorbell Kit Instruction Manual
A- SAFETY INSTRUCTIONS
This manual is an integral part of your product. These instructions are provided for your safety. Read this manual carefully before installing and keep it in a safe place for future reference. Select a suitable location. Make sure you can easily insert screws and wall plugs into the wall. Connect the wires in accordance with the information provided. The installation & electric connections must be made using best practices by a specialized and qualified person. Check the product is only used for its intended purpose.
⚠ This manual may be amended as the application is updated. To ensure you have the latest version, we recommend you download it from our website www.scs- sentinel.com or from · the app iSCS Sentinel : settings/ manual.
B- DESCRIPTION
Even in your absence, view and respond with your smartphone to visitors who
come to your home!
At home, the indoor chime takes over to warn you locally in a traditional way.
B1- Kit content
B2- Product presentation
C· INSTALLATION & WIRING
D- CONFIGURATION
D-1 Installing the app
D2- Adding the doorbell to the application
⚠ If the device fails to connect to Wi-Fi, an error page is displayed.
D3- Troubleshooting
D4- Test your product
D5- Application settings
D6- Using the app
Reset
1- To reset the bell, remove the cover and hold the button with the small tool
(provided) for 5 seconds.
This will remove chime pairing to your Wi-Fi network.
E- TECHNICAL SPECIFICATIONS
F· TECHNICAL ASSISTANCE
Troubleshooting assistance
G·WARRANTY
Keep the barcode in a safe place, along with proof of purchase these will be
requested if you need to use the warranty.
It is essential to keep proof of purchase throughout the warranty period.
Not covered by the warranty:
- Material and electrical damage resulting from incorrect installation.
- Damage resulting from improper use (other than for its intended purpose) or modifications.
- Damage resulting from the use and/or installation of parts not included or recommended by SCS Sentinel.
- Damage DUE to a lack of maintenance or impact.
- Damage RESULTING from poor weather, such as hail, lightning or strong winds.
- Returns without a copy of the invoice or proof of purchase.
H-WARNINGS
- Keep matches, candles and flames away from the device.
- Product functionality can be influenced by a strong electromagnetic interference.
- This equipment is intended for private consumer use only.
- The chime to be connected must not be exposed to water dripping or splashing.
- The plug-in chime must be used only indoor.
- When installing the product, keep the packaging out of reach of children and animals. It is a source of potential danger.
- This appliance is not a toy. It is not designed to be used by children.
Hereby, SCS Sentinel declares that this product complies with the essential requirements and other relevant provisions of directive 2014/53/EU. The declaration of conformity may be consulted on the website: www.scs- sentinel.com/downloads.
INSTALLATION
The power supply must be supplied with an AC mains of 230V +/- 70%, 50/60 Hz.
It supplies an output voltage of 12V DC (continuous voltage). The maximum
current supplied is of 1.5A. In the event of an overload, the power supply
would progressively get in protection and stop functioning. It would start
functioning again after a few minutes. The power supply must be installed
vertically on the DIN-rail to let the clamping spring show downwards. X:
Minimum air gap distance between input and output cables (100 mm). Y: The
input cables (the mains) must be halted through a strap isolated at 1,5 cm
f,”.Rm the clam output. D1/D2 : Minimum air gap distance below and above the
product: 40 mm. \1/ Tightening torque of the clamps screws: 0,5 Nm
DANGER OF ELECTROCUTION – Read carefully the following directions
Before the installing by the user of the power supply ref. Transfo 12V, bellow
called « product or power supply», the consultation of these instructions is
compulsory.
The electric power supply, object of this manual, hereinafter also called
product, can only be installed by qualified and authorized personnel who knows
and respect the technical standards as well as all the general current
standards and rules related to this product typology. The power supply of this
manual is for use with single-phase mains voltage. Its perfect and safe
operation requires proper transportation and storage such as assembly and
installation performed in a workmanlike manner.
⚠ This product is not adapted for an external use. It must be mounted inside an electrical and fire enclosure in self-extinguishing material. It must not be used in different environmental conditions and work ranges than the ones indicated on the label.
The products must be installed vertically to let the clamping spring (2) show
downwards (see table B). The holes and the tabs of aeration of the products
must not be covered. Keep a free space under and over the products to allow a
free air circulation. necessary for a correct heat exchange (table B). For the
DIN-rail mounting. please referee to the table C. Before making the
installation, make sure that the power was turned off and that the input and
output clamps, that are identifiable on the product label (1). For the
standard products in Insulation Class II, the hearth connection is not
foreseen. The products with a hearth clamp must be connected to the ground.
For the connection of the products to the AC mains, use cables and derivations
with a section that does not exceed a current density of 4A/mm2 and add the
right terminals. Make sure that all the terminal screws are
tightly fastened in the clamps, being careful not to exceed the tightening
torque 0.5Nm. The input cables (AC mains) must be held through an insulated
cable tie (Y) at 1.5 cm from the clamp output. Connect to the AC mains supply
each input pole by a readily accessible all-pole mains switch to provide a
full disconnection under the Overvoltage Category II. We recommend to protect
the electrical installation through a surge absorber or a similar device. A
wiring must be realized to guarantee an adequate distance between the input
and output cables (100 mm), so to maintain the insulation between the primary
and the secondary and avoid radio interferences. For the removal from the DIN-
rail (see table D), make sure the power was turned off, the remove the wiring
from the clamps and insulate it correctly.
PRECAUTIONS
These equipment’s are not suitable for use in locations where children are likely to be present. Risk of electric shocks or flames. (The negligence can cause death, serious injuries or damage the ownership). Do not connect the power supply with a not specified input source. Do not damage or crush the input wiring. Do not install or connect the power supply, while it is on. Do not connect the output clamps to the AC mains. Do not damage or crush the input wiring. Do not short-circuit the input and output wiring. Do not alter, open or perforate the power supply. Keep the power supply and the AC wires away from moisture or dust.
INTERDICTIONS
Do never install the
power supply in one of the following places, malfunctions, electric shocks or
fire can occur, where not authorized and not qualified personnel has access.
Places that are exposed to very low temperatures, under direct sunlight, near
devices that change temperature, in front of air conditioners, inside a
refrigerated area, etc … Places that are exposed to humidity or extreme
condensation, like bath rooms, cellars, greenhouses, etc … Places that are
exposed to specific environmental conditions, like dust, oil, chemicals, salt,
etc … Places exposed to continuous vibrations or impacts. Places exposed to
warm stream or smoke (near heating equipment’s or cooking surfaces). Outdoors
or in the rain. Do not use at an altitude exceeding 2000m .
Don’t throw out of order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.
The invoice and barcode will be required as proof of purchase date during the warranty period.
892 3so 490 W'”f?II
Horaire du service, voir sur le site internet : www.scs-
sentlnel.com
011-2339876
L 937376105
For an individual answer, use our online chat on our website www.scs- sentinel.com