EXTREMUS BT-99 Snow Bound Ski Helmet User Manual

EXTREMUS BT-99 Snow Bound Ski Helmet

User Manual

Fit the Ear Pads

1. Step1 Push the ear pad into the helmet and ensure a secure connection.
2. Step2 Pass the strap through the Ear Pad Loop; lock the Strap Buckle.
3. Step3 Fit the ear pad on the other side in the same way.

Using With Goggles

1. Step1 Open the snap of the Goggles Loop.
2.   Step2 Attach the head strap of the ski googles on the helmet.
3. Step3 Close the snap of the Goggles Loop.

Important: There should be no gap between the top of your goggles and the helmet.

Maintenance And Care

• Important: Inspect your helmet before each use. If there are signs of damage, stop using and replace with a new one immediately.
• Cleaning Removable fleece liner and ear guards are washable. Recommended cleaning way: gentle hand washing .
• In this way we can avoid the fleece liner and ear pads out of shape

Attention: Avoid using any harsh chemicals like bleach or detergent as this will degrade the Skin friendly materials. Avoid washing by washing machine.
Storage Do not store the helmet in a wet environment or near a heat source or strong UV radiation.

Important Tips

READ THESE INSTRUCTIONS BEFORE USING THIS HELMET.

• All helmets sold by Extremus meet the most common U.S.-based standards for ski helmet certification, known as ASFM F2040.
• The helmets are designed exclusively for adults and are not intended for use by children.
• Although a ski helmet that meets the standards will help reduce the risk of some types of injuries to the head at slower speeds, the protection is limited.
• This helmet is specifically designed for snow sports (skiing and snowboarding) and is not intended for use on motorcycles or other motorized vehicles. The helmet may be damaged by paints, solvents, bleach, or strong detergents, sometimes invisibly. Please exercise caution when using these chemicals.
• The helmet can only provide protection for the areas it covers. (e.g., It does not protect your neck.) No helmet can protect against all possible impacts, and for maximum protection, the helmet must be fitted and attached properly to the wearer’s head following the manufacturer’s FITTING INSTRUCTIONS. Upon impact, the helmet may sustain damage that renders it inadequate for further head protection, and this damage may not be visible to the user. If the helmet has been impacted, it should be destroyed and replaced.
• Even if a helmet is never dropped or crashed, it is still not recommended for use beyond five years.

Product Overview

Fitting Instructions

Important: To ensure maximum protection and comfort, please choose the right helmet size according to the FITTING INSTRUCTIONS.

1. Step1 Unlock the Strap Buckle, then put on the helmet. Make sure the helmet is positioned horizontally on your head.
2. Step2  Adjust the wearing height of the helmet so that the helmet can neither expose your forehead nor block your vision Shake your head lightly to test if your helmet is well fitted.
3. Step3  The Helmet should hold onto your head when you move it front and back or side-to-side. Tip: Please try a smaller size if the helmet moves around on your head easily.
4. Step4   After fitting comfortably, tighten the Chin Strap by adjusting through the Sliding Buckle.
5. Step5 Lock the Strap Buckle to ensure that the strap does not slip.
6. Step6 Turn the Size Adjustment Dial clockwise to make the Fleece Liner tighter; turn the Size Adjustment Dial counterclockwise to make the Fleece Liner looser.

Removable Ear Pads Remove the Ear Pads

1. Step1 Unlock the Strap Buckle; pass the strap through the Ear
2. Step2  Pad Loop. Pull out the ear pad from the helmet.
3. Step3 Remove the ear pad on the other side in the same way.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>