SEALEY 9804L Hi-Vis Waistcoat User Manual
- May 15, 2024
- SEALEY
Table of Contents
SEALEY 9804L Hi-Vis Waistcoat
Product Information
Specifications
- Model Numbers: 9804L, 9804M, 9804XL, 9804XXL, 9812M, 9812L, 9812XL, 9812XXL
- Color: Yellow/Orange
- Standard: Conforms to BS EN471, Class 2
- Obsolescence Period: 1 year from the date of purchase
Product Usage Instructions
Introduction
The Hi-Vis Waistcoat is lightweight for comfort and conforms to BS EN471,
Class 2 standards.
Sizing Information
Ensure you select the correct size for a comfortable fit.
Safety
- Always wear the garment fastened.
- Keep the garment clean; replace if visibility properties are compromised.
- Dispose of the garment according to local environmental guidelines.
- Take care when wearing near moving machinery.
Cleaning
- Machine wash up to 25 cycles following care label instructions.
- Avoid biological powder; use the synthetic cycle on your washing machine.
- Select warm or minimum wash settings, or hand wash.
- Cold rinse with a short spin; do not wring out the waistcoat.
Storage
- Store in a clean and dry condition.
- Avoid storing in places subject to strong sunlight.
Obsolescence
The product should be replaced after the obsolescence period of 1 year from
the date of purchase.
Frequently Asked Questions (FAQ)
-
Q: How often should I wash the Hi-Vis Waistcoat?
A: You can machine wash it up to 25 cycles, following the care label instructions. Avoid using biological powder and use the synthetic cycle on your washing machine. -
Q: What should I do if the visibility properties of the garment are compromised?
A: If the high visibility properties become irretrievably soiled, it is recommended to replace the garment to ensure safety. -
Q: How should I store the Hi-Vis Waistcoat?
A: Store the waistcoat in a clean and dry condition, avoiding places subject to strong sunlight to maintain its quality.
HI-VIS WAISTCOAT (SITE AND ROAD USE) YELLOW / ORANGE
MODEL NO: 9804L 9804M 9804XL 9804XXL 9812M 9812L 9812XL 9812XXL
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
- Lightweight for comfort.
- Conforms to BS EN471, Class 2.
SIZING INFORMATION
SAFETY
- Always wear the garment fastened.
- Keep clean should the high visibility properties of this garment become irretrievably soiled, replace if damaged.
- Dispose of garment in accordance according to local environment guidelines.
WARNING! Please take care when wearing this garment near moving machinery.
CLEANING
- WARNING! Maximum 25 cycles of mechine washing and follow the care label.
- DO NOT wash in biological powder and use the synthetic cycle on your washing mechine.
- Select a warm and minimum wash, or hand wash.
- Cold rince with a short spin. Do not Wring out the waistcoat.
STORAGE
- Always store in a clean and dry condition.
- DO NOT store in places subject to strong sunlight.
OBSOLESCENCE
The period of obsolescence is 1 year from date of purchase. After this, the product should be replaced.
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product.
Warranty
Guarantee is 12 months from purchase date, proof of which is required for any claim.
- EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
- UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- 01284 757500 sales@sealey.co.uk www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
9804L9804M 9804XL 9804XXL 9812M 9812L 9812XL 9812XXL Issue 1 27/11/23