Oubo TP2000W Power Inverter User Manual
- May 15, 2024
- OUBO
Table of Contents
Oubo TP2000W Power Inverter
Product Information
Specifications
- Remote Controller Type: 3 in 1 (Wireless, Wired, Remote Display)
- Function: Remote control the inverter, turn inverter ON or OFF, monitor working status
- Wireless Control Distance: 50m-100m (164ft-328ft)
- Wired Control Distance: 3m (9.8ft)
Product Usage Instructions
Wireless Remote Control Operation
- Plug the remote module into the inverter’s remote port.
- Use the remote controller to turn the ON/OFF power inverter. Note: Ensure the inverter switch is OFF.
- Operation Modes:
- Short press in screen-off mode: Light up the screen
- Short press in screen-on mode: Switch between battery voltage levels
- Long press in screen-on mode (2 seconds): Turn ON Power Inverter
- Long press in screen-on mode (2 seconds): Turn OFF Power Inverter
Wired Remote Control Operation
- Connect the power inverter to the remote controller using the provided remote wire.
- Use the remote controller to turn the ON/OFF power inverter. Note: Ensure the inverter switch is OFF.
- Operation Modes:
- Short press in screen-off mode: Light up the screen
- Short press in screen-on mode: Switch between battery voltage levels
- Long press in screen-on mode (2 seconds): Turn ON Power Inverter
- Long press in screen-on mode (2 seconds): Turn OFF Power Inverter
FAQ
- Q: What is the wireless control distance for the remote controller?
- A: The wireless control distance is between 50m-100m (164ft-328ft).
- Q: What is the wired control distance for the remote controller?
- A: The wired control distance is 3m (9.8ft).
- Q: What should I do if the remote controller does not work?
- A: Check the batteries in the remote, ensure proper connection, and refer to the troubleshooting section of the user manual.
Instructions
The upgraded remote controller (3 in 1) for the power inverter.
Wireless Remote Control, Wired Remote Control, and Remote Display Function:
Remote control the inverter, easy to turn the inverter ON or OFF, and monitor
the inverter’s working status.
- Wireless Remote Control Operation:
- Plug the remote module into the inverter’s remote port.
- Use the remote controller to turn ON/OFF power inverter
Note: Ensure the inverter switch is OFF when using the remote control.
| Operation Mode | Status |
|---|---|
| Short press in screen-off mode | Light up the screen |
Short press in screen-on mode
| Switching between
the remote controller’s internal battery voltage/level and the battery system voltage/level
Long press in screen-on mode
(2 seconds)
| Turn ON the Power Inverter
Long press in screen-on mode
(2 seconds)
| Turn OFF the Power Inverter
The upgraded remote controller (3 in 1) for the power inverter.
Wireless Remote Control, Wired Remote Control, and Remote Display Function:
Remote control the inverter, easy to turn the inverter ON or OFF, and monitor
the inverter’s working status.
Wired Remote Control Operation
- Connect the power inverter to the remote controller using the provided remote wire.
- Use the remote controller to turn the ON/OFF power inverter.
Note: Ensure the inverter switch is OFF when using the remote control.
| Operation Mode | Status |
|---|---|
| Short press in screen-off mode | Light up the screen |
Short press in screen-on mode
| Switching between
the remote controller’s internal battery voltage/level and the battery system voltage/level
Long press in screen-on mode
(2 seconds)
| Turn ON the Power Inverter
Long press in screen-on mode
(2 seconds)
| Turn OFF the Power Inverter
FCC STATEMENT
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>