iHome iW24 POWERVALET 2-in-1 Wireless Charger User Manual

: June 4, 2024
: iHome

Table of Contents

iW24 POWERVALET 2-in-1 Wireless Charger
REAR CONTROLS
WIRELESS CHARGING
Documents / Resources

POWERVAULT 2-in-1 Wireless Charger
User Manual

iW24 POWERVALET 2-in-1 Wireless Charger

ALARM SET

iHome iW24 POWERVALET 2-in-1 Wireless Charger - Fig

– Press to Preview and Arm/Disarm the Alarm
– Press & Hold to Set the Alarm
– Use +/- to set the hour and press the alarm to conﬁrm
– Use +/- to set the minute and press the alarm to conﬁrm
– Use +/- to set a schedule (7 days, weekdays, weekends) and press the alarm to conﬁrm (alarm is 7 days until a date is set; See Date Set below)
– When the alarm sounds, press the alarm to disable and reset it for the next day
SET (+/- )

– Press to increase/decrease settings
SNOOZE/DIMMERZZZ
– Press to increase/decrease settings
– Press to Snooze Alarm
– Press & Hold to Adjust Snooze Duration (adjust 1-29 min with +/- and press Snooze to conﬁrm)
– Press and release to dim display: Aut1, Aut2, Aut0Hi, 3, 2, Lo, and OFF

DATE SET/DST (DAYLIGHT SAVINGS)
– Press & Hold to Set the Date
– Use +/- to select the year and press the date set to conﬁrm
– Use +/- to set the month and press date set to conﬁrm
– Use +/- to set the day and press the date set to conﬁrm
– Short press will show DST status on display. Short press toggles Auto/OFF

REAR CONTROLS

iHome iW24 POWERVALET 2-in-1 Wireless Charger - Fig3

TIME SET
– Press & Hold to Set Clock
– Use +/- to select 12/24 hour mode and press time set to conﬁrm
– Use +/- to set the hour and press time set to conﬁrm. PM Indicator will display for PM time. (There is no AM Indicator)
– Use +/- to set the minute and press time set to conﬁrm
Connect the AC adapter to DC Jack, and plug it into an outlet.

WIRELESS CHARGING

Supports:

Qi-compatible phones (also works with plastic cases up to 3mm thick)
AirPods with wireless charging case Place the Qi-compatible device face-up on the charging rest. Wireless Charging Indicator will show the charging status:
Rapid blinking : The device is not charging (reposition the device).
Slow blinking : The device is charging.
Solid : The device is fully charged.

Note: The icon may continue to blink slowly when iOS devices are fully charged.
CAUTION: Remove the phone’s metal protective case before charging. Do not place magnetic or metal objects on the charger during charging. Qi-compatible phones with metallic-looking ﬁnishes will charge normally.
For questions and additional information, please scan the QR code or visit: www.ihome.com/help/iw24
WARNING:

Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

Do not use this product near water.
Unplug the unit and clean it only with a damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including ampliﬁers) that produce heat.
Only use attachments/accessories speciﬁed by the manufacturer.
Unplug this product during lightning storms or when unused for long periods of time.
Damage Requiring Service
– This product should be serviced by qualiﬁed service personnel when:
– Plug has been damaged.
– Objects have fallen into or liquid has been spilled into the enclosure.
– The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
– The unit exhibits a marked change in performance or does not operate normally. No naked ﬂame sources, such as lighted candles, should be placed on this product.
Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To ﬁnd a drop-off location near you, visit www.call2recycle.com
This product is suitable for use in tropical and/or moderate climates.

WARNING:
– To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture.
– Do not dispose of batteries in the household trash or ﬁre.
– The mains plug of the power adaptor is used as the disconnect device, it shall remain readily operable.

FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, and operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm (8 inches) between the radiator & your body.

ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

The device complies with ISED RF exposure requirements, and users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

https://www.ihomeaudio.com/support/product/iW24
Printed in China

Documents / Resources

| iHome iW24 POWERVALET 2-in-1 Wireless Charger [pdf] User Manual
IW24A, EMOIW24A, iW24 POWERVALET 2-in-1 Wireless Charger, iW24, POWERVALET 2-in-1 Wireless Charger, Wireless Charger, Charger
---|---