QAZQA 105536 Zoë CL 3 Modern Ceiling Lamp Instruction Manual

QAZQA 105536 Zoë CL 3 Modern Ceiling Lamp

Product Information
The product is a luminaire that requires three E27 bulbs with a maximum wattage of 40W. It consists of a pipe, a screw, a ring, and a final product that measures 40 cm in height and 21 cm in diameter. The luminaire has an IPXX rating for protection against moisture.

Product Usage Instructions

1. Insert the pipe into the designated hole.
2. Repeat step 1 to insert the remaining two pipes into their respective holes.
3. Tighten the screw using the L-key to secure the pipes in place.
4. Follow steps 5 and step 6 for any additional assembly or installation steps mentioned in the complete user manual.
5. Once assembled, the final product should be ready for use.

Note: It is important to ensure that no moisture comes into contact with the terminal connections or voltage control parts during maintenance. Only clean the surfaces of the luminaires.

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference.

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come
3. Into contact with any areas of the terminal connections or voltage control parts
4.  The electrical supply must be switched off of the outset. preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
5.  Exterior lighting must not be installed during rain
6.  Take account of the minimal separation distance from other objects and the room required around the fitting
7.  If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
8.  Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
9.  When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
10.  Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
11.  Take account of all available technical information.
12.  Take note of the symbols when connecting wires:
    • N =Neutral
    • L =Live
    • =Earth
13.  Meaning of symbols:

For indoor use only, where direct contact with water is impossible

This icon indicates the level of water-proof and dust-proof
Protection Class I: the fitting must be earthed
Protection Class II: the fitting is doubled insulated and does not require earthing
Protection Class III: the fitting is low voltage
Minimum distance from lighted objects (meters)
Only the self-shielded halogen lamp should be used with the luminaire Strip the wire to the indicated length (mm); different items require different length
Connect using the specified cable; different items require different cables
The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
The armature is designed to work only with the indicated voltage. Different items require different working voltages.
The luminaire can be used in combination with a dimmer
The reference light angle and light space of the luminaire
This luminaire cannot be disposed of together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.gazaa.nl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>