Naxa Electronics NAS-3092 The Illuminator Bluetooth Speaker-Complete Features/User Guide

Naxa Electronics NAS-3092 The Illuminator Bluetooth Speaker

Specifications

• Product Dimensions
  11.75 x 2.3 x 2.3 inches

• Item Weight
  14.1 ounces

• Batteries
  1 Lithium Ion batteries

• Connectivity Technology
  Bluetooth, Auxiliary, USB

• Brand
  Naxa Electronics

Introduction

A wireless speaker that pulses with the music and has multicolor LED illumination effects. Stream music wirelessly from Bluetooth-enabled devices or use the 3.5mm AUX audio connection that is included to connect. You can make and receive calls using the built-in microphone on your smartphone, and the dual speakers provide exceptional power and quality (6W RMS). plays MP3 files from microSD or USB flash devices. has an FM radio and a built-in rechargeable battery (1200 mAh). USB charging cables and AUX cables are included as extras.

Getting Started

• Remove the unit from the box.
• Remove any packaging from the product.
• Please retain packaging until you have checked and counted all the parts and the contents against the parts list.

Package Contents

• Bluetooth Speaker with LED Flashing Lights
• USB Charging cable
• 3.5mm auxiliary cord
• Instruction manual

Features

1. Bluetooth LED Flashing Speaker
2. Built-in Multi-colored LED Flashing Lights
3. Built-in Rechargeable Battery
4. Stream Music Wirelessly
5. Use as a Hands-Free speaker phone device, with a built-in microphone
6. Built-in controls support play, pause, forward/backward track, and volume
7. Play music through Bluetooth, AUX, TF Card & USB(TF card & USB flash drive not included)
8. Built-in FM radio

IMPORTANT SAFETY INFORMATION

1. Read all instructions before using this product.
2. Do not leave this product unattended while connected to the power supply.
3. Do not immerse in water or any other liquids.
4. Do not use if the unit has been dropped or damaged in any way.
5. Repairs to electrical equipment should only be performed by qualified personnel. Improper repairs may place users at serious risk.
6. Place unit on sound, even surface, free of vibrations and away from sources of heat.
7. Do not use it with wet hands.
8. Do not put objects into openings.
9. Keep free of dust, lint, hair, etc.
10. Do not use this unit for anything other than its intended use.
11. Keep this product out of reach of children.
12. This product is not a toy.
13. Do not play music at excessive levels especially near children, as damage to the hearing may occur.

DESCRIPTION OF PARTS

1. Skip Forward/Increase Volume

2. Skip Backward/Decrease Volume

3. Mode Button

4. MFB (play/pause/phone/LED on/off) Buttor
   Long press to turn on/off the Multi-coloure
   LED Flashing Lights

5. AUX-Inpyt

6. TF Card Slot

7. USB Slot

8. ON/OFF Switch

9. USB Charging Port

10. LED Light Indicator

INSTRUCTIONS FOR USE

Charging the speaker
For best results, fully charge the speaker before use.

1. Connect the USB charging cord (included) to the charging port of the speaker and insert the other end into a port on your computer or similar suitable power source
2. The Red LED turns on, indicating that the battery is being charged. Once it is fully charged, the Red LED will turn off. It takes about 4 hours to charge the speaker fully.

Turn On/Off the Speaker

1. To Turn “ON’, slide the ON/OFF” Switch to the ON Position.
2. To Turn “OFF, slide the “ON/OFF° switch to the OFF Position.

Switch the speaker to Bluetooth pairing mode-

1. Turn ON the speaker.
2. You will hear the audible tone and the LED Lights will illuminate. The speaker is now in pairing mode.
   (Note: Speaker will automatically pair with previously paired devices)

Pairing your device with Bluetooth Speaker

Your Bluetooth Speaker can wirelessly stream audio from any B|uetooth enabled device Within 2/-33 Feet. Simply follow the below steps.

1. Turn ON the speaker.
2. You will hear the audible tone and the LED Light will illuminate. The speaker is now in pairing mode.
3. Turn on the Bluetooth on your Mobile Phone Tablet or Computer.
4. It will search for various devices.
5. The pairing name of the Bluetooth Speaker is “NAXA NAS-3092, pair it with this device.
6. lIf required, enter the password 0000′ to confirm to finalize the pairing.
7. Once paired successfully, you should hear an indication tone.
8. If you fail to pair it within the time frame or you want to pair it with a new device please follow the steps outlined above again.

Listening to Music using a USB /TF Card Slot

1. Turn on the speaker.
2. Insert a TF card or USB flash drive into the TF Card Slot or USB Slot. Music will be automatically streamed.
3. Short press or K button tO move forward or backward on your playlist.
4. Short press the button to Play or Pause a track.

Note
 While using Bluetooth, if you insert a TF Card or USB Flash drive, the speaker would disconnect the Bluetooth connection and switch to the TF card or USB card function. You can short press the Mode button each time until it goes back to Bluetooth mode.

Care and Maintenance

Clean the unit with a soft, damp cloth. Never use chemicals or hard abrasives Keep this unit away from wet or damp surroundings.

The crossed-out wheelie bin symbol on this item indicates that this product needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authorities for details of where to take the item for recycling.

Frequently Asked Questions

How can my Bluetooth speaker be reset?

You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.

How are speakers that are wirelessly powered?

Yes, the majority of wireless speakers plug into standard power outlets or power strips using AC adaptors. To become “truly wireless,” some systems employ rechargeable batteries, although this feature necessitates repositioning and charging as routine tasks in order to use this type of surround sound system.

Is WiFi required for Bluetooth speakers?

Instead of an internet connection, short-range radio waves are how Bluetooth operates. This means you don’t need a data plan or even a cellular connection for Bluetooth to function anywhere you have two compatible devices.

Why does my Bluetooth speaker keep shutting off by itself?

Why does my Bluetooth speaker keep shutting off by itself?
Turning Bluetooth on manually in your Android’s settings should prevent it from automatically turning on and off. It’s possible that you need to adjust your power saving settings if your Bluetooth connection is cutting out due to low battery.

The reason why my Bluetooth speaker won’t charge

Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.

Why does the blue LED on my Bluetooth speaker blink?

A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern.

Can you listen to music with a Bluetooth speaker?

You may simply connect to the tiny wireless speaker from a computer that has Bluetooth functionality if it has a microphone. There is no method to transmit audio if the tiny wireless speaker doesn’t already have a microphone and the necessary hardware to add one.

How far may Bluetooth speakers be used?

The ranges at which Bluetooth speakers connect vary. Depending on the size and type you select, the majority may reach distances of approximately 30 feet (9 metres) all the way up to 100 feet (30 metres).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>