FelixKing FK931-C Ergonomic Desk Chair Instruction Manual

FelixKing FK931-C Ergonomic Desk Chair

Scan the QR code to watch the installation video.

Installation video

Instructions for Use

Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instruction properly. Make sure all the parts are included (1 Skinds in total).

Accessories List

Notice If any questions, contact FelixKing-service@outlook.com / FelixKing-Spt@outlook.com

• This is a single chair, so please do not seat 2 or more persons, just seat only one person.
• Do not stand on the chair.
• Do not sit in reverse or sit outside of the seat cushion.
• Check the screws once every 6 months, to make sure the screws are tight. Do not use the chair when the screws are loose.
• Please assemble according to the instructions.

Assembly Instruction

Please assemble in a wide and flat place.

1. Take out Split Base Tube (3) and Central Base Tube(4). Insert Split Base Tube (3) into Central Base Tube (4) as shown. You can see there are two screw holes. Align with the holes, tighten Screws M6X12mm (12) with Hexagon Wrench (15) to fix 5 Split Base Tube (3) to Central Base Tube (4). Repeat five times. (3)Split Base Tube
2. Take out Castors (5) and Air Rod (6). Insert Castors (5) into part of Step 1 as shown. There are 5 Castors (5) that need to be inserted. Insert Air Rod (6) into the hole of Central Base Tube (4) as shown. Put it aside and we’ll use it in Step 6.
3. Tighten the Screws M6X20mm (11) and M6X25mm (10) with Hexagon Wrench (15) to fix 2 Armrests(7) to the back of Back­rest(1 ). Tighten the 4 screws firmly and then cover the screws with Decoration Caps(13).
4. After Step 3, fix the bottom of the Armrests (7) to the back of the Seat Cushion (2). Tighten the Screws M6X30mm (9) Gasket(14) with Hexagon Wrench (15) firmly.
5. Fix the Base Plate (8) to the bottom of the Seat Cushion (2). Tighten the Screws M6X20mm (11) with Hexagon Wrench (15) firmly.
6. Pick up the Step 2’s Air Rod (6) and Central Base Tube(4). Insert the Air Rod (6) into Step S’s Base Plate (8). There’s a hole in the middle of the Base Plate (8). Press the Seat Cushion (2) from top to bottom, and use your whole body’s strength to insert it firmly, the assembly is complete now.
   • • Caution: If the Air Rod (6) doesn’t inserted to Base Plate (8) firmly, it’s likely to fall down when the chair rises up.

Activate Your Warranty Now!

FelixKing guarantees you a pleasant buying experience. Please scan the QR code to activate your warranty, so that you can enjoy priority and better after- sales service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>