FelixKing FK918W-Z Drafting Ergonomic Tall Office Chair Instruction Manual

Table of Contents

Notice

Do not stand in this chair or use the chair as a step ladder use it as a chair only. This chair is designed for one person to use at a time.
This chair is designed for one person weighing up to 300lb(136kg).
Do not use this chair unless all bolts, screws, and knobs are firmly secured.
Check all bolts, screws, and knobs every 90 days. Tighten if any are loose.
Failure to follow these instructions may result in serious injury or death of yourself and people around you.
Some of the parts are heavy and/or have shaped edges, please install them carefully to avoid hurting you and the people around you.

Upward adjustment
Downward adjustment
Armrest adjustment
300 LB (136 kg)
Thanks for purchasing our products. Please read this manual before assembly.
And please assemble in order. After the assembly, keep the instructions properly.
Make sure all the parts are included (15 kinds in total).

Step 1

Insert 5 Split Foot Stool (3) into the central base tube as shown. Align with the holes on both sides, tighten 10 Screws M6X12mm (11) with Hexagon Wrench (12).

Step 2

Insert the 5 Castors (4) into the footstool installed in step one and press them in firmly.
Caution: Confirm Castors (4) must be inserted deeply. Otherwise, the Castors could easily fall out and the chair could fall down.

Step 3

Put Air Rod (5) into the hole of the central base tube as shown.
Caution: Please insert Air Rod (5) straightly, and then press Air Rod (5) firmly into Foot Stool (3).

Step 4

Insert the Foot Ring (15) into the assembled Air Rod (5) at your desired height. But at least one inch from the top of the outer circle of the Air Rod (5) as shown. Please follow the shown direction of the arrow to tighten the knob by hand on the Foot Ring (15).
Then put it aside and we will use it in Step 8.

Step 5

Tighten the Screws M6X30mm (8) with Hexagon Wrench (12) to fix 2 Armrests (6) to the back of the Backrest (1). Tighten the 4 screws firmly and then cover the screws with 4 Decoration Caps (13)

Step 6

After Step 5, fix the bottom of the Armrests (6) to the back of the Seat Cushion (2). Tighten the 4 Screws M6X35mm (9) and 4 Gaskets (14) with Hexagon Wrench (12) firmly.
Caution: There is a FRONT sticker on the front of the Seat Cushion (2).

Step 7

Step 8

Pick up the Step 4’s Air Rod (5) and Foot Stool (3). Insert the Air Rod (5) into Step 7’s Base Plate (7). There’s a hole in the middle of the Base Plate (7).
Press the Seat Cushion (2) from top to bottom, and use your whole body’s strength to insert it firmly the assembly is complete now.
Caution: If the Air Rod (5) isn’t inserted into Base Plate (7) firmly, it’s likely to fall down when the chair raises up.

Activate Your Warranty Now!

We guarantee you a pleasant buying experience. Please scan the QR code to activate your warranty so that you can enjoy priority and better after-sales service.