Whirlpool W11643461 B Dishwasher User Manual

Whirlpool W11643461 B Dishwasher

Specifications

• Brand: Whirlpool
• Model: [Insert Model Number]
• Capacity: [Insert Capacity]
• Energy Consumption: [Insert Energy Consumption]
• Water Consumption: [Insert Water Consumption]

Product Usage Instructions

First Time Use

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel and fill the salt reservoir up to its edge (approximately 1 kg); fill with water for the first use only.
3. Remove the funnel, wipe any residue, and securely screw on the cap.
4. Add salt before each washing cycle to prevent corrosion.

Filling the Rinse Aid Dispenser

• Rinse aid makes dish drying easier. Fill the rinse aid dispenser when the indicator light is lit. Do not pour rinse aid directly into the tub.

Filling the Detergent Dispenser

• Open the detergent dispenser using the opening device. Add detergent only to the dry dispenser. For pre-washing, place detergent directly inside the tub. Use the TABLET button for all-in-one detergents for optimal results.

FAQ

How do I register my appliance?

• To receive complete assistance, register your appliance at www.whirlpool.eu/register.

What should I do if the LED flashes rapidly and beeps?

• If an option is not compatible with the selected program, the LED will flash rapidly and beep.
• The option will not be enabled.
• Refer to the PROGRAMS TABLE for compatible options.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

• To receive more complete assistance, please register your appliance at: www.whirlpool.eu/register
• Before using the appliance carefully read the Safety Instructions.

CONTROL PANEL

1. ON-OFF/Reset button with indicator light
2. Program selection button
3. Salt refill indicator light
4. Rinse Aid refill indicator light
5. Program number and delay time indicator
6. Tablet indicator light
7. Display
8. Multizone indicator lights
9. Multizone button
10. Delay button
11. Turbo button with indicator light
12. Power Clean button with indicator light
13. START/Pause button with indicator light / Tab

FIRST TIME USE

FILLING THE SALT RESERVOIR

• The use of salt prevents the formation of LIMESCALE on the dishes and the machine’s functional components.
• The salt reservoir must never be empty.
• It is important to set the water hardness.
• The salt reservoir is located in the lower part of the dishwasher and must be filled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
3. Only the first time you do this: fill the salt reservoir with water.
4. Remove the funnel and wipe any salt residue away from the opening.
   • Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).
   • Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

• Rinse aid makes dish DRYING easier.
• The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control panel is lit.
• NEVER pour the rinse aid directly into the appliance tub.

FILLING THE DETERGENT DISPENSER

• To open the detergent dispenser use the opening device C. Introduce the detergent into the dry dispenser D only.
• Place the amount of detergent for pre-washing directly inside the tub.
• If all-in-one detergents are used, we recommend using the TABLET button, because it adjusts the program so that the best washing and drying results are always achieved.
• Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.

WATER SOFTENING SYSTEM

• Water softener automatically reduces water hardness, consequently preventing scale buildup on the heater, contributing also to better cleaning efficiency.
• This system regenerates itself with salt, therefore it is required to refill the salt container when empty.
• The frequency of regeneration depends on the water hardness level setting – regeneration takes place once per 6 Eco cycles with the water hardness level set to 3.
• The regeneration process starts in the final rinse and finishes in the drying phase before the cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.

PROGRAMS TABLE

• ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
• Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com Pre-treatment of the dishes is not needed before any of the programs.
• Not all options can be used simultaneously.
• Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options, and sensor cali-bration. The sensor calibration can increase program duration by up to 20 min.

OPTIONS AND FUNCTIONS

• Please scan the QR code on your product to have more detailed information.
• OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
• If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound.
• The option will not be enabled.
• MULTIZONE – If there are not many dishes to be washed, a half-loading may be used to save water, electricity, and detergent. By default, the appliance washes dishes in all racks.
• TURBO – This option can be used to reduce the duration of the main programs while maintaining the same washing and drying performance levels.
• NaturalDry is a convection drying system that automatically opens the door during/after the drying phase to ensure exceptional drying performance every day.
• The door opens at a temperature that is safe to your kitchen furniture, the door will not be opened when the option of TURBO is on.
• As additional steam protection, specially designed protection foil is added together with the dishwasher.
• To see how to mount protection foil please refer to (the INSTALLATION GUIDE).
• TABLET (Tab)- If you use powder or liquid detergent, this option should be off.
• POWER CLEAN – Thanks to the additional power jets this option provides a more intensive and powerful wash in the lower rack, in the specific area.
• This option is recommended for washing pots and casseroles.
• DELAY – The start time of the program may be delayed for a while between 1 and 12 hours.
• The DELAY function cannot be set once a wash cycle has been started.
• OPERATION INDICATOR – An LED light projected on the floor indicates that the dishwasher is working.
• One of the following operating modes can be selected.
• a) Disabled function.
• b) When the cycle starts the light goes on for a few seconds, stays off during the cycle, and flashes at the end of the cycle.
• c) The light stays on during the cycle and flashes at the end of the cycle (default mode).

LOADING THE RACKS

CAPACITY: 14 standard place-settings

LOWER RACK

• For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.
• The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position (lower) to load pans and salad bowls easily.
• (loading example for the lower rack)

POWER CLEAN

• Power Clean uses special water jets in the rear of the cavity to wash the highly dirty items.
• The lower rack has a Space Zone, a special pullout support in the rear of the rack that can be used to support frying pans or baking pans in an upright position, thus taking up less space.
• Placing the pots/casseroles faced to the Power Clean® component please activate the POWER CLEAN on the panel.

CLEANING AND MAINTENANCE

More information in the Daily Reference Guide on the website.

CLEANING THE FILTER ASSEMBLY

• In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds, etc.) please remove them carefully.
• NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
• To remove the upper spray arm, turn the plastic locking ring in a clockwise direction.
• The lower spray arm may be removed by pulling it upwards.

TROUBLESHOOTING

• Please scan the QR code on your product to have more detailed information.

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service whose contact details can be found in the warranty booklet. Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.

PROBLEMS| POSSIBLE CAUSES| SOLUTIONS
The dishwasher does not fill the water.

The display shows: that H, 6, and On/Off LEDs are blinking rapidly

| No water in the water supply or the tap is closed.| Make sure there is water in the water supply or the tap running.
The inlet hose is bent.| Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishware- sher and reboot.
The sieve in the water inlet hose is clogged; it is necessary to clean it| After having carried out the verification and cleaning, turn off and turn on the dishwasher and restart a new program.
The dishwasher finishes the cycle prematurely. The display shows: 15 and the On/ Off LED is blinking rapidly| Drain hose positioned too low or siphoning into the home sewage system.| Check if the end of the drain hose is placed at the correct height (see INSTALLATION). Check for siphoning into the home sewage system, and install an air admittance valve if necessary.
Air in the water supply.| Check the water supply for leaks or other issues letting air inside.

• Policies, standard documentation, ordering of spare parts, and additional product information can be found by:
• Use a QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
• The model information can be retrieved using the QR code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.
• PLEASE SCAN THE QR CODE ON YOUR APPLIANCE TO HAVE MORE DETAILED INFORMATION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>