TINY LAND TLTGPT001 Climbing Playset Instruction Manual
- May 15, 2024
- TINY LAND
Table of Contents
TINY LAND TLTGPT001 Climbing Playset
Specifications
- Recommended age: 2 years and above
- Adult assembly required
- Contains small parts and sharp objects
- Dimensions: 2.5x63cm, 2.5x50cm, 6x25mm, 6x48mm, 4x28mm
Product Usage Instructions
Pre-Assembly:
- Read the instructions carefully
- Ensure all parts are included
- Identify and organize the parts before starting assembly
Assembly Steps:
- Place all blocks randomly on the ‘7’ board and secure them with ‘d’ screws
- Attach two ’13’ pillars on both sides of the ladder using ‘c’ screws
- Secure the climbing board on a flat surface
- Attach provided poles on the arch with ‘c’ screws
- Repeat the previous step for the other side of the arch
- Fasten ‘c’ screws on each side of the ladder
- Insert protruding part into the groove
- Repeat steps as necessary for both sides of the ladder
- Place ‘b’ screws and tighten the cat lock with ‘a’ plastic plugs on each inner side of the ladder
- Tighten ‘6’ screws on both sides of the ladder
- Attach climbing board between ladder and arch to complete assembly
Post-Assembly:
Fold the climbing playset inward and store in a safe place when not in use.
Frequently Asked Questions
- Q: Can children under 2 years use this product?
- A: No, this product is not suitable for children under 2 years. Adult assembly is required.
- Q: Are there any small or sharp parts in this product?
- A: Yes, there may be small parts and sharp objects while assembling. Please handle with care.
- Q: How should I store the climbing playset when not in use?
- A: Fold the playset inward and store it in a safe place to prevent damage.
WARNING
Not for children under 2 years. Adult assembly only. Using align key is required when assembling. There may be small parts and sharp objects while assembling. Before using this product, please read the instruction carefully and keep it safe for future reference. Failure to follow the instruction may result in damage to the product and put your baby at risk.
CONTENTS
Installation Instruction
- Place all the blocks randomly on the ‘7’ board and screw each one using two ‘d’ screws.
- Place and fasten two ‘13’ pillars on both sides of the ladder. Screw and tighten 5 ‘c’ screws on each side.
- Once everything is fastened tightly, place the climbing board on a flat place.
- Place and fasten the provided poles on the arch with 9 ‘c’ screws.
- Repeat the same step for the other side of the arch.
- Place and tighten 7 ‘c’ screws on each side of the ladder
- Repeat the same step for the other side of the ladder.
- Insert the protruding part into the groove.
- Place 3 ‘b’ screws on each inner side and tighten the cat lock with the ‘a’ plastic plugs and repeat the same step to complete the ladder.
- Place 3 ‘b’ screws on each inner side and tighten the cat lock with the ‘a’ plastic plugs and repeat the same step to complete the ladder.
- Place and tighten two ‘6’ screws on both sides of the ladder
- Place and fasten the climbing board between the ladder and the arch to complete the assembly.
- Fold it as shown when not in use
- @tinylandus
- @tinylandtoy
- www.tinylandus.com
- customer_care@tinylandus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>