Tiny Land Tent2005 Pink Glow in Dark Play Tent Instruction Manual

Tiny Land Tent2005 Pink Glow in Dark Play Tent Instruction Manual

Exposed it under the light or sunlight before use. The brightness of stars on the top cover is positively correlated with the time it is exposed to the light source.

WARNING

CHOKING HAZARD
Small parts can be swallowed and block the airway.
Do not allow children under the age of 3 to use this product.
Use under adult supervision at all times.

FIRE HAZARD
Keep all flame and heat sources away from tent fabric.

Assembly and usage guidelines

• Adult assembly required
• Adult supervision required at all times
• Ages 3+

Install Batteries

1. Remove the battery cover. Slide off in the direction indicated on the box.
2. Install 3 AA batteries in the order indicated by the imprints inside of the battery compartment.
3. Reinstall the battery cover.

Package Contents

Installation structure schematic

1. Use connector tube 1 to connect two poles A together, a total of 12 groups.
   

2. Follow the picture to connect poles assembled in step 1 on connector 3.
   
   

3. Pass the pole that completed in step 2 into the bottom pole sleeve of the tent C.
   

4. Connect the rod formed in step 2 with 4 connector to form the bottom.
   

5. After finishing step 4, you should see a 5 structure like the picture.
   

6. Use connector tube 1 to connect two poles B together, a total of 12 groups.
   

7. Follow the picture to connect poles assembled in step 6 with the longest end of connector 2 .
   

8. Insert the rod assembled in step 6 vertically into connector 3.
   
   

9. After finishing step 8, you should see a structure like the picture.

10. Pick up the tent and cover the top of the pole, making sure the whole pole is inside the fabric.
    

11. After finishing step 10, you should see a structure like the picture.
    

12. Go inside the tent and use connector 2 to connect the pole assembled in step 1.
    

13. After finishing step 12, you should see a structure like the picture.
    

14. Insert the rod assembled in step 6 onto the bevel top of connector 2.
    

15. Use connector 4 to connect the top of the frame.
    

16. Adjust the tent cover and attach the fix straps onto connector 2.
    
    

17. After finishing step 16, you should see the completed tent like the picture.
    

Support

 www.tinylandus.com
@tinylandus
@tinylandtoy
[email protected]

References

• Tiny Land® Kids Teepee Tent, Play Kitchen Set, Wood Creative Toys Shop – Tiny Land Offical Store

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>