Tiny Land TP0012 Teepee Tent for Kids With Pompom Ball Instruction Manual

June 10, 2024
TINY LAND

Tiny Land TP0012 Teepee Tent for Kids With Pompom Ball

Product Information

  • Brand: Tiny Land
  • Product Name: Teepee Tent
  • Material: Cotton Rope and Canvas Fabric
  • Dimensions: 4.8 feet (Cotton Rope length)
  • Assembly Required: Yes

Product Usage Instructions

  1. Slide fully assembled poles into the pole sleeves located on the teepee fabric.
  2. Slide each pole to the base of the canvas sleeves. Make sure all of the poles are inserted to the bottom, the sleeve should not be wrinkled.
  3. Start to thread the string from an eyelet on the canvas and leave 10 inches on the tail.
  4. Tighten the rope by tying it in a knot.
  5. Wrap the poles a lap with the rope and tie the knot at the end. Be sure to tighten the rope.
  6. Take the tent to the place where you want to place it, then stand it up.
  7. Ensure all teepee poles are fully extended and the fabric in each section is tight. The fabric should not sag between poles if all poles are fully extended.
  8. Enjoy!

Note: When the poles or connectors come snapped or broken, discard them! Contact us through [email protected] immediately and get replacements.
For any further assistance or queries, please contact us [email protected] or visit our website www.tinylandus.com.

You can also follow us on social media for updates and offers:

  • Instagram: @tinylandus
  • Twitter: @tinylandtoy

WARNING
CHOKING HAZARD

  • Small parts can be swallowed and block the airway.
  • Cotton rope can wrap around the neck and pose a strangulation hazard.
  • Do not allow children under the age of 3 to use this product.
  • Use adult supervision at all times.

FIRE HAZARD

  • Keep all flame and heat sources away from teepee fabric.

Assembly and usage guidelines

  • Adult assembly required
  • Adult supervision required at all times . Ages 3+

Parts List

Note: It’s best to lay the tent flat on a clean mat to assemble it

  1. To begin assembly, rotate the pole to insert it into the connector until they are fully connected. One set of pole contains two short polea, two short poleB and three connectorse. Repeat until all four poles are assembled.
  2. Slide fully assembled poles into the pole sleeves located on the teepee fabricß. Slide each pole to the base of the canvas sleeves
  3. Make sure all of the poles are inserted to the bottom, the sleeve should not be wrinkled. Note: The steps of tying of rope are quite crucial to the stability of the teepee. The incorrect tether may cause the teepee to be unstable.
  4. Attach wood poles and teepee canvas using the cotton rope. Thread the rope through the eyelets on the canvas and then through the pole, alternating each time (keeping all poles bunched together)
  5. Tighten the rope between the pole and the fabric like tightening a shoelace
  6. Tighten the rope by tying it in a knot.
  7. Wrap the poles a lap with the rope and tie the knot at the end. Be sure to tighten the rope.
  8. Take the tent to the place where you want to place it, then stand it up.Ensure all teepee poles are fully extended and the fabric in each section is tight. The fabric should not sag between poles if all poles are fully extended. Enjoy

Poles:
When the poles or connectors come snapped or broken, discard them! Contact us through [email protected] immediately and get replacements.

insta: @tinylandus
FB: @tinylandtoy
www.tinylandus.com
[email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

TINY LAND User Manuals

Related Manuals