OLDE MIDWAY PRO12 Hot Dog Roller with Warming Drawer Instruction Manual

Table of Contents

Specifications

Inspect all components before use.
Do not use if any parts are damaged or missing.
Attaching Glass Cover:
Locate and remove the screws on the inner sides of the roller base.
Position the back glass mount onto the roller base and secure with screws.
Insert side glass panels into mounts and place the large curved glass shield.
Place the stainless steel trim plate over the glass and secure with bolts and nuts.

Operating Instructions

Q: How do I clean the hot dog roller?
- A: Unplug the machine and allow it to cool. Wipe the rollers and surfaces with a damp cloth. Do not immerse in water.
Q: Can I use metal utensils to handle the hot dogs while cooking?
- A: It is recommended to use tongs or other utensils to handle hot dogs as the rollers can get very hot.

WARNING

Misuse of this machine may result in serious injury or death.

READ ALL INSTRUCTIONS BEFORE USING YOUR HOT DOG ROLLER. RETAIN THIS MANUAL FOR FUTURE REFERENCE.

This hot dog roller is not a toy. Please keep away from children. This machine should not be operated by anyone under the age of 18.
Do not use the machine for anything other than its intended purpose. This machine should never be modified.
Make sure the machine is plugged into a grounded outlet with the appropriate electrical supply. Always make sure the wall outlet being used is properly grounded.
Take proper safety precautions when using this machine.
Do not touch moving parts. Keep body, hair, jewelry, clothing, etc. away from the machine when in use.
Use only 3-prong grounded extension cords that meet or exceed the electrical rating.
Always switch the POWER OFF on the machine before unplugging it from the outlet.
Always use controls to operate. Allow hot parts to cool down before moving or cleaning.
Always place the machine on a secure, level, and stable surface.
This is a freestanding machine and should not be placed in a built-in or recessed area.
To avoid any risk of electrical shock, do not immerse the cord or plug in water.
Do not place on top of cloth or fabric materials.
DO NOT CLEAN WITH DETERGENT OR ABRASIVE CLEANERS. DO NOT IMMERSE IN WATER.

SPECIFICATIONS

OLDE-MIDWAY-PRO12-Hot-Dog-Roller-with-Warming-Drawer-
fig1

OLDE-MIDWAY-PRO12-Hot-Dog-Roller-with-Warming-Drawer-
fig2

k1 : Power Switch
M : Motor
T3 : Thermostatic Switch
D3 : Warming Indicator Light
R : Heater (120W/110V 150W/220V) T1, T2: Temperature Control Switch D1, D2: Heating Indicator light

ASSEMBLY INSTRUCTIONS

INSPECT ALL COMPONENTS BEFORE USE.

DO NOT ATTEMPT TO USE THE HOTDOG ROLLER

MACHINE IF ANY PARTS ARE DAMAGED OR MISSING.

ATTACHING GLASS COVER

Skip to Operating Instructions if the Hot Dog Roller DOES NOT have a glass cover.

STEP 1:
- Locate and remove the pair of screws on the inner left and right sides of the roller base and set aside.
STEP 2:
- Position the back glass mount onto the roller base. Reinsert the screws removed in STEP 1 and hand-tighten, as it may need to be adjusted. Repeat for the remaining 3 mounts.
STEP 3:
- Insert one of the small side glass panels into both the front and back mounts on one side of the machine with the curved side of the glass facing the back (away from the controls). If needed, adjust mounts by sliding forward or backward until the glass is snug; tighten to secure. Repeat for the other side.
STEP 4:
- Place the large curved glass shield into the back mounts pushing gently all the way down into the channel. Check to make sure the edges of the top and side glass pieces are flush.
STEP 5:
- Place the stainless steel trim plate over the edge of the top glass, aligning the holes with the glass.
STEP 6:
- Insert a bolt through the trim plate and glass, then secure with nut. DO NOT OVERTIGHTEN, as this may crack the glass.

STEP 1:
- Before the first use, apply a small amount of vegetable oil onto the surface of the rollers. Press the Power Switch ON. The indicator light will glow when the machine has power and will turn off when the temperature has been reached.
  NOTE : The machine will become hot very quickly.
STEP 2:
- Adjust the temperature controllers, FRONT and BACK. We recommend lower temperatures until you understand the cooking times.
PRO12 (5 rollers) FRONT dial controls front 3 rollers – BACK dial controls the rear 2
PRO18 (7 rollers) FRONT dial controls front 4 rollers – BACK dial controls the rear 3
PRO24 (9 rollers) FRONT dial controls front 5 rollers – BACK dial controls the rear 4
PRO30 (11 rollers) FRONT dial controls front 6 rollers – BACK dial controls the rear 5

STEP 3:
ATTENTION : Rollers are HOT – DO NOT TOUCH! Place hot dogs between the rollers using tongs or other utensil. Do not use your hands.

PRO12 – Maximum 12 hot dogs
PRO18 – Maximum 18 hot dogs
PRO24 – Maximum 24 hot dogs
PRO30 – Maximum 30 hot dogs
STEP 4:
- If you are using the hot dog bun warming drawer, open the drawer and place buns inside. Adjust the WARMING temperature controller to the desired temperature.
STEP 5:
- After approximately 15 minutes the hot dogs should be ready to eat. Cook times may vary depending on cooking temperature, thickness of the hot dogs, and starting temperature (frozen hot dogs may take longer).
STEP 6:
- Remove the hot dogs and hot dog buns using tongs or other utensil. Do not use your hands.
STEP 7:
- Press the Power Switch OFF.
STEP 8:
- Unplug from wall outlet. Allow to cool completely before touching or cleaning.

It is recommended that the hot dog roller be cleaned after each use.

Make sure the machine is turned OFF and it is unplugged.
Allow the machine to cool completely.
Do not immerse the cord, plug or any part of the machine in water or other liquid.
Wipe down rollers, removable drip tray, and bun warmer with a damp soft cloth. Do not submerge the machine in water or spray water into the machine.
NEVER USE STEEL WOOL TO CLEAN THE MACHINE, THIS WILL SCRATCH THE SURFACES. Do not use abrasive cleaning agents or chemicals on any part of the machine.
A food-safe glass cleaner can be used to clean the glass.
After cleaning, dry with a soft cloth. Make sure the unit is completely dry before using again or storing it.

Olde Midway features a full line of concession equipment and accessories.