eonon Q53SE 9 Inch Touchscreen Android 10 Car Stereo User Manual

User Manual 9 Inch Touchscreen Android 10 Car Stereo

Q53SE 9 Inch Touchscreen Android 10 Car Stereo

Front Side

1. Press to go back to the previous page
2. Press to go to Home Screen, press and hold to launch Google Assistant
3. Press to view recently used apps
4. Built-in microphone
5. Reset button
6. Application list
7. Press to mute, press and hold to power on/off
8. Press to go to Home Screen
9. Return
10. Press to decrease the volume by one, long-press to decrease the volume continuously
11. Press to increase the volume by one, long-press to increase the volume incrementally

Accessories

Wiring Diagram
(Not 1111 below items are included.
For accessoiies that come with the car sb!n!o, please l1!fer to the Accessolies page.)

Precautions

• Please seek professional help. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock. injury or other hazards.
• This product is only suitable for vehicles with 12V DC Power system Do not install it on vehicles whose power supply is not 12V DC. or it may damage the product or cause a fire due to overvoltage.
• Do not allow this product to come into contact with liquids. Otherwise it may result in electrical shock or product damage.
• Please tum off the car and disconnect the positive battery terminal before installation to prevent product damage or fires caused by short circuits.
• All wires should be insulated after installation to prevent product damage or fires caused by short circuits.
• Please do not use the car audio after the engine is turned off for a long time, or it will drain the battery power.
• If this product is exposed to water damage or foreign matter is discovered in the product while you’re driving. please park your vehicle in a safe place. tum off the ignition switch(ACC Off) immediately and consult your dealer or Eonon customer senrice. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.
• If smoke. sbange noises or ul’lJSUal odors occur during normal use. or any other abnormal signs appear on the LCD screen. please tum off the power immediately and consult your dealer or Eonon customer senrice. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.
• Do not cisassemble or mocify this product For interior inspection. adjusbnent or maintenance, please consult your dealer or Eonon customer senrice.
• Please use this product in accordance with traffic laws.
• Keep this manual handy as a reference for operating procedures and safety information.
• We reserve the right of final explanation.

Home Screen
Home Saeen and Application List
The home screen is the starting point to access all of the features on your phone. It displays application shortcuts, icons, widgets, and other features.
Click to select the style of your home screen.The application list shows all applications, including icons for newly installed applications.

1. Swipe up from the bottom of the home screen, or tap to access the application list. To return to the home screen, swipe down on the application list interface, or tap the home button  or return button . On the application list interface, swipe left to turn pages.
2. On the home screen, long-press any app to replace it with another app.

Application List
Long-press an app for two seconds and drag to change its position. Bluetooth
Note: This product only supports calls via Bluetooth and Bluetooth music by connecting the Bluetooth on your phone. It supports Bluetooth OBD-Il (EONON V0056). Other Bluetooth devices are not supported.
CAUTION: For your safety, please avoid talking on the phone as much as possible while driving.
Click or to display the Bluetooth menu.

1. Click to access the Bluetooth connection menu.[ ] Bluetooth devices that have been successfully Paired will be listed here
   [ ] Find Bluetooth devices
   [ ] Disconnect Bluetooth connection
   [ ] Click to delete the Bluetooth devices in the list
   Note:
   • The operation of different mobile phone types may differ. For detailed instructions, please refer to the user manual of your phone.
   • It is not guaranteed that all mobile phones with Bluetooth wireless technology can be connected.
   • The distance between this product and your phone must be less than 5 meters when using Bluetooth.

2. Click to access the dial pad.[ ] Dial pad
   [ ] Delete
   [ ]  Make acall
   [ ]  endacall
   [ ] Answer calls via car stereo /mobile phone
   Note:
   • You may hear noises in the following situations:
   • When you press the button on the phone to answer a call.
   • When the person on the other end of the line hangs up the phone.
   • If the person on the other end of the line cannot hear the conversation due to an echo, please turn down the volume for hands-free calling.

3. Cllck to access phonebook.[ ] Contact list
   [ ] Add a contact to the Favorites list
   [ ] Contacts that you add to the Favorites list
   [ ] Synchronize contacts
   [ ] Delete all contacts
   Enter a name or phone number in the search bar to search the corresponding contact
   Note:
   • Please ensure that sharing phonebook via Bluetooth is enabled on your phone before synchronizing phonebook.
   • Pictures or special characters will not be displayed.

4. Click to access call history.[ ] Missed calls
   [  ] Received calls
   [ ] Dialed calls
   [ ] Delete call history

5. Click  to access Bluetooth settings. You can set up device name, pin number, microphone gain, volume gain and Bluetooth data service here.

6. Click to access Bluetooth music.[ ] Previous
   [ ] Play/Pause
   [ ] Next
   Note:
   • Resume playback is not supported as the music Bluetooth device plays is not from the head unit.
   • Please avoid using your phone as much as possible when you’re playing music via Bluetooth. Or noises may occur when the music is playing.
   • The music may stop playing during a Bluetooth call.

Radio
Please set the radio correctly according to your area/region:
Setting —> Factory —> Password: 123456—> Select radio region —> Select your region click fal to turn on the radio.
[ ] Automatically search and save radio stations.
Click to start searching for radio stations[ ] Automatically from the lowest frequency to the highest frequency. Click again to stop searching.
[ ] LOC/DX switch. It’s in LOC mode when the radio displays “LOC”, meaning only radio signals within a short distance can be received.
[ ] Switch to the previous radio station.
[ ] Switch to the next radio station.
[ ] Press once to lower the frequency by one.
[ ] Press once to increase the frequency by one.[ ] Turn on REG function to prevent the car stereo from switching to alternative frequencies that are transmitting different programme content.
[ ] Click to listen to traffic report.
[ ] FM1/FM2/AM switch
[ ] Sound effects
[ ] Radio setting/Channel setting
[ ] Prestored radio stations.
A total of 36(18 FM, 18AM) radio stations can be prestored. Press and hold the prestored radio button for 2 seconds to store the current radio station in the corresponding position.
[ ] RDS settings
[ ] Alternative frequency. Click to automatically switch to another station with the same program from the current station to ensure the playback continuity when the signal is weak.
[ ] Program type. Click to choose program type, such as news, music, politics and technology etc.
CarPlay
Wired CarPlay setup steps:

1. Tap to turn on the TlinkS app on the head unit (as shown in picture 1).
2. Connect the USB cable of your iPhone to the USB cable labeled “CarPlay” of the head unit.
3. Tap Allow on the prompt asking for CarPlay to access your phone while it is locked (as shown in picture 2).

Note:
Please be sure to connect the USB cable of your iPhone to the USB cable labeled “CarPlay” of the unit, or Apple CarPlay will not be available.
Wireless CarPlay setup steps:

1. Tap to turn on the TlinkS app on the head unit (as shown in picture 1).
2. Turn on WiFi and Bluetooth of your iPhone.
3. Find Bluetooth of the head unit (Bluetooth name: EONON; password:0000) and connect to it.
4. Tap Use CarPlay on the prompt asking for CarPlay to access your phone while it is locked (as shown in picture 2).

Note:
Please do not connect to Bluetooth manually after accessing CarPlay. If you want to use Bluetooth, please tap the WiFi icon to disconnect CarPlay first (as shown in picture 3).
iPhone models that support CarPlay:
iPhone 14
iPhone 14 Plus
iPhone 14 Pro
iPhone 14 Pro Max
iPhone 13 Pro
iPhone 13 Pro Max
iPhone 13
iPhone 13 mini
iPhone 12 Pro
iPhone 12 Pro Max
iPhone 12
iPhone 12 mini
iPhone 11 Pro
iPhone 11 Pro Max
iPhone 11
iPhone Xs
iPhone Xs Max
iPhone XR
iPhone X
iPhone 8
iPhone 8 Plus
iPhone 7
iPhone 7 Plus
iPhone 6s
iPhone 6s Plus
iPhone 6
iPhone 6 Plus
iPhone SE (Gen 1)
iPhone SE (Gen 2)
iPhone SE (Gen 3)
iPhone 5s
iPhone 5c
iPhone 5
Android Auto
Wired Android Auto setup steps:

1. Go to the Play Store and download the Android Auto app on your phone (as shown in picture 1).
2. Tap to turn on the Tlink5 app on the head unit (as shown in picture 2).
3. Connect the USB cable of your phone to the USB cable labeled “USB” of the head unit.

Note:

1. Please be sure that your phone supports Google services and Android Auto.
2. Wired Android Auto requires Android version 6.0 or later with the latest version of Android Auto app being installed on the phone.

Wireless Android Auto setup steps:

1. Go to the Play Store and download the Android Auto app on your phone (as shown in picture 1).
2. Tap  turn on the TlinkS app on the head unit (as shown in picture 2).
3. Turn on WiFi and Bluetooth of your phone.
4. Find Bluetooth of the head unit (Bluetooth name: EONON; password:0000) and connect to it.
5. It will enter Android Auto automatically after connecting the Bluetooth successfully.

Note:

1. Please be sure that your phone supports Google services and wireless Android Auto.
2. To connect wireless Android Auto, your phone needs to support 5 GHz Wi-Fi, with the latest version of Android Auto app being installed on the phone. Such as all Android 11 phones, Android 10 Googie phones or Samsung phones, Android 9 Samsung Galaxy $8, Galaxy $8+, or Note 8, etc.

Screen Mirroring
Wired Screen Mirroring
Tap to turn on the TlinkS app on the head unit (as shown in picture 1). Tap to switch to wired screen mirroring (as shown in picture 2). iPhone Wired Screen Mirroring
Setup steps:

1. Turn on the Bluetooth of the iPhone.
2. Find Bluetooth of the head unit (Bluetooth name: EONON; password:0000) and connect to it.
3. Connect your iPhone to the USB port of the head unit with the iPhone USB cable.
4. When a pop-up appears on your phone asking whether you want to trust this computer, tap Trust (as shown below).

Android Wired Screen Mirroring
Setup steps:

1. Turn on the Bluetooth of your phone and connect it to the Bluetooth of the unit.
2. Connect your phone to the USB port of the head unit with the phone’s USB cable. Use your phone to scan the QR code on the unit (as shown below) to download the Zplus APK and install it on the phone.
3. Reconnect the USB cable after downloading the Zplus app. When a pop-up appears on your phone asking whether you want to start recording or casting with Zplus, tap Start now.

Wireless Screen Mirroring
On the wired screen mirroring interface (as shown in picture 1), tap to switch to wireless screen mirroring. iPhone Wireless Screen Mirroring

1. Tap and then turn on the hotspot of the iPhone. Connect the head unit to the iPhone hotspot.
2. Tap Screen Mirroring and then tap zj-airplay to set it up completely.

Android Wireless Screen Mirroring

1. Tap and a QR code (as shown below) will appear on the head unit. Use your phone to scan the QR code to download the Zplus APK and install it on the phone.

2. Tap on your phone to turn on Zplus app and select Wireless connection.

3. Set it up according to the steps in the below picture.
   Turn on the Bluetooth of your phone and connect it to the Bluetooth of the unit. Turn on the hotspot of your phone and connect the head unit to the phone hotspot.

4. Tap START SCREEN PROJECTION after setup. When a pop-up appears on your phone asking whether you want to start recording or casting with Zplus, tap Start now.

Split-screen Multitasking

Note: Some apps don’t support screen multitasking.
Enable split-screen mode:

1. Click on the status bar to view all running apps, and then select an app.
2. Press and hold the selected app until it shows “drag here to use split screen” on the left.
3. Drag the app to the left.
4. Split screen finished.

Exit split-screen mode:
Touch and hold the split-screen line in the middle, and drag it left or right to exit split-screen mode.

GPS Navigation
How to use GPS Navigation on Eonon Android car stereos?

1. Online maps
   Google Maps app is preinstalled on Eonon car stereo. You can use online maps after connecting the head unit to the network.

2. Offline maps
   If you are in an area where downloading the data of Google offline maps is supported, you can save the map data of that area to the car stereo in Google Maps and use it offline. Or you can download other offline map apps in the Google Play such as Here WeGo.

3. Buy a map card
   Buy a map card that works with Android car stereos, and insert the map card into the MicroSD card slot of the car stereo, then set the navigation path to run GPS.

4. Screen mirroring
   Maps on the phone can be synchronized to the car stereo screen via TlinkS app.

5. Apple CarPlay/Android Auto
   For iPhone, maps on the phone can be synchronized to the car stereo screen via Apple CarPlay.
   For Android phone, maps on the phone can be synchronized to the car stereo screen via Android Auto.
   Note: Some car stereos don’t have an SD card slot and cannot use SD cards directly.

Tips:

• You can also go to Google Play to download other navigation apps like Waze, Sygic, etc.
• Some navigation apps will specify the storage path of map data. Storing map data to an external MicroSD card or a USB flash drive is not supported.

Settings

GPS settings
Enter Settings —> General —> Navigation application to select a navigation app as Navigation shortcut.Enter Settings —> Sound —> Navi audio channel to set up navigation audio channel.
When set to Mixing, you can still listen to radio, music or hear other sounds when the navigation voice is speaking. You can change the volume of radio, music or other sounds by adjusting the value of Mix Settings.
WI-Fi
Support connecting to the network via Wi-Fi.
click and select Network to set up network. Music
You can copy audio files to a Micro SD card or USB flash drive before inserting them into the car stereo, and click to play music.
Note: Some car stereos don’t have an SD card slot and cannot use SD cards directly.
Song ID feature is available on this car stereo.
Support audio formats like MP3, WAV, AC3, OGG, FLAC, Web audio, etc.
[ ] Add a song to your Favorites
[ ] Change playback mode
[ ] View all audio files from the Micro SD card or USB flash
[ ] Previous
[ ] Pause/Play
[ ] Next
[  ] Sound effects
[ ] Show Lyrics on/off
Video
You can copy video files to a Micro SD card or USB flash drive before inserting them into the car stereo, and click to play videos.
Support video formats like AVI, MKV, MP4, WMV, RMVB, MPG, etc.
Note: Some car stereos don’t have an SD card slot and cannot use SD cards directly.
[ ] View all video files from the Micro SD card or USB flash
[ ] Full screen
[ ] Previous
[ ] Pause/Play
[ ] Nex
[ ] Sound effects
[ ] Floating window on/off, Brake setting on/off
Picture
Click to view all the pictures from the internal storage, SD card or USB device.
Note: Some car stereos don’t have an SD card slot and cannot use SD cards directly. Audio Settings
Click access the Audio settings menu and set up settings like sound field effect, EQ modes, etc.

OBD-iI(On-Board Diagnostics) is a computer-based self-diagnostic system built into your car which monitors emissions, mileage, speed and more.
Torque is a vehicle / car performance / diagnostics tool and scanner that uses an OBD II Bluetooth adapter to connect to your OBD2 engine management / ECU. You can see what your car is doing in realtime, get OBD fault codes, car performance, sensor data and more.

1. Click enter Torque app.

2. Find your vehicle’s diagnostic plug and plug the OBD-II adapter into it. The diagnostic plug is usually under the dashboard on the driver’s side, or near the steering wheel or behind the flaps under the steering wheel.

3. Now you need to pair the adapter with the car stereo. Click to turn on Bluetooth of the car stereo and click to access Bluetooth settings, enter Bluetooth data service —>Go —>Pair new device.
   When the Bluetooth device “OBD II” is displayed in the list, select the device. Enter the pairing code “1234” to complete the pairing.

4. Turn on the Torque app, click and set up the Torque as follows: Settings- OBD-1I Adapter Settings —> Choose Bluetooth Device —> Select the corresponding OBD-II device.

Note:

1. This car stereo does not come with an OBD-II adapter. You can choose to use Eonon V0056 OBD-II adapter.
   It only supports adapters that require no connection password and transmit data via Bluetooth.

2. When connecting to an OBDII adapter, you can enter 1234/0000/8888 when it requires a password for connection.

3. Some data may not be displayed because the data that different car OBD-II ports support is different.

File Browser
Click to access File Browser.
You can view, copy, paste, or delete files in the memory/SD card/USB flash drive through the File Browser.
Note: Some car stereos don’t have an SD card slot and cannot use SD cards directly.

APP Installation
This product supports the installation of various applications, but there is no guarantee that all applications will be compatible.
You can install an app via the following methods:Download the apk file for an app to the car stereo’s memory storage/SD card/USB flash drive and install it on the car stereo via Apk Installer.
Note: Some car stereos don’t have an SD card slot and cannot use SD cards directly.

LCD Screen Usage
Screen cleaning:

1. Please turn off the power and wipe the screen gently with a soft cloth. When you wipe the screen, please avoid scratching the screen with your fingernails.
2. Do not use wet cloth, volatile oil or diluter to clean the screen.

Note:

• Sometimes there are small black dots or flashing dots(bright spots) on the LCD screen. This is typical LCD phenomenon and not a symptom of any defect or failure.
• When used in a cold place, the screen may be dark after powering on. After a while, normal brightness will be restored.
• Screen reflection may occur when the sun shines directly on the screen. Anti-glare cover or film can be purchased to reduce reflections from direct sunlight on the screen.
• Please avoid direct sunlight on the LCD screen when not driving. Prolonged exposure to direct sunlight or high temperatures may cause LCD screen malfunction.
• Do not press hard on the screen to avoid product failure.
• Operating temp range: -20 °C to +60 °C
• Storage temp range: -30 °C to +70 °C

GPS Antenna Installation
The GPS antenna can be mounted inside or outside the vehicle, such as the dashboard or the roof of vehicle. Note:
The GPS antenna must be mounted in an open place. If the windshield is equipped with an explosion-proof membrane or a thermal insulation film, the satellite signal of GPS antenna may be weakened. In this case, it is recommended to install the GPS antenna outside the vehicle.

Settings
Click to access settings.Display: Display setting Brightness mode
Select [auto] the car stereo will switch between night and day mode depending on whether the car light is turned on or not.
Select [day] the saeen brightness stays in day mode.
Select [night], the screen brightness stays in night mode. General: General settings Sleep Tme: Set up the sleep time. You can tum on the car stereo quidcly once connected to power supply during the sleep time, without restarting the car stereo.
2 Hours sleep: Select [2 hours sleep], the car stereo will enter a sleep state. You can tum on the car stereo quickly if it is connected to power supply within 2 hours. The head unit will start with a cold start after 2 hours. And the same applies to (1 day sleep) and [3 day sleep].
Panel light setting: Set up the panel light
Follow the headlight The panel light will only light up after the headlight is turned on.
Normally on: The panel light will stay on after turning on the head unit

Reverse settings

Reversing mirror. Select [on1 images on the screen are displayed as mirror-reversed while reversing.
Reversing line ruler: Select [on1 it will display the parking assist guidelines while reversing.
Reverse delay: Set up the delay time for entering the reverse mode. For example, when set to 1 second the car stereo will not enter the reverse mode until the car has reversed for 1 second.
Reversing system selection
Select [auto], it will automatically recognize the format of the backup camera. If it can’t recognize the format of the backup camera,
please set up the format manually. For example, if you use a 720P\25fps AHO camera, please select [AHO 720p 25fps].

Factory settings
The password of factory setting is [123456). Factory settings are for configuration during the manufacturing process. Please do not change them arbitrarily, or the car stereo may not work properly.

Steering wheel settings

Note: You don’t need to set up steering wheel controls if your car stereo comes with a CAN Bus.
Steps:

1. Connect Steering Wheel Control 1\Steering Wheel Control 2\GND wires of the car stereo to your car swc wires.
2. Oick ·RESET” and then dick ·srART”
3. Select the button you want to set up.
4. Press and hold the corresponding button that needs to be set on the steering wheel. It’s set up successfully when a blue tick appears.
5. Repeat 3-4 times to complete the settings of all buttons.
6. Oick ”END”.

Note:
The steering wheel control function of Eonon universal car stereos is controlled by analog signal. If your car is controlled by the digital signal, you need to purchase a steering wheel control adapter cable to transfer the digital signal to analog signal.

Specifications

Wi-Fi Specifications

Voltage Support| Vcc_3.3V
Support Standard| IEEE802.11B/g/n compatible WLAN
Interface Type| USB 2.0
Frequency Range| 2.4/SGHz
Modulation| OFDM/DBPSK/DQPSK/CCK
Video Formats| Support AVI, MKV, MP4, WMV, RMVB, MPG…all Android videos formats, Web video and 1080P video.
---|---
Audio Formats| Support MP3, WAV, AC3, OGG, FLAC, Web audio, etc.
Picture Formats| Support JPEG, BMP, PNG, TIFF, etc.

FAQ

Can it be updated to the latest Android version?
Different from computers or phones, Eonon head units do not support upgrading the Android system to a higher version.
Blank screen/Can’t power on:

1. Please press the RST button of the car stereo.
2. Please check if the car stereo has stable DC12V voltage?
3. Please check if the car stereo fuse is burnt out?
4. Please reconnect the BATT+/ACC/GND wires of the car stereo to the BATT+/ACC/GND wires of the original car.

Radio is not working properly:

1. Please check if the radio area is set correctly.
2. Please check if the radio antenna is connected properly and reconnect it to have a try.
3. Please check if the ANT control cable is connected properly and reconnect it to have a try.

No sound:

1. Please reconnect the 4 sets of speaker output wires in ISO PORT with the interface of the original car speaker.
2. Please make sure that the amplifier control wire (REM) of the original car is properly connected to the amplifier control wire of the car stereo.

Images do not automatically change while reversing:
Please connect the reverse control wire of the car stereo to the backup camera trigger wire.
There is no image while reversing:
Enter Settings—>Reverse—> Reversing system selection to set up the format of the backup camera.
No GPS signal:

1. Please check whether the GPS antenna is connected properly and reconnect it to have a try.
2. Please confirm whether you’re in an area where GPS signal is shielded. Please drive for a while to see if the GPS signal is restored.

Android Auto is not working:

1. Please make sure that your phone supports Google services and Android Auto. Please note that some mobile phones don’t support Android Auto, and some mobile phones only support wired Android Auto but not wireless Android Auto.
2. If your phone supports Android Auto, please install Android Auto APP from the Play store before using it.
3. To use wired Android Auto, please use the original data cable and connect it to the USB cable labeled “CarPlay” of the head unit.
4. To use wireless Android Auto, please turn on WiFi and Bluetooth of your phone and connect your phone’s Bluetooth to the head unit’s Bluetooth. Please note that you only need to connect Bluetooth but not WiFi.

CarPlay is not working:

1. To use wired CarPlay, please use the original data cable and connect it to the USB cable labeled “CarPlay” of the head unit.
2. To use wireless CarPlay, please turn on WiFi and Bluetooth of your iPhone and connect your phone’s Bluetooth to the head unit’s Bluetooth. Please note that you only need to connect Bluetooth but not WiFi.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>