RYOBI P2807 18 Volt 1 Gallon Electrostatic Sprayer Owner’s Manual

: June 6, 2024
: RYOBI

**RYOBI P2807 18 Volt 1 Gallon Electrostatic Sprayer

RYOBI P2807 18
Volt 1 Gallon Electrostatic Sprayer pro **

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

Know your chemical sprayer. Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool.
Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
Do not allow bystanders or children in the area while operating this product. Exposure to some chemicals can be hazardous.
This product is suitable for indoor and outdoor use.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Stay alert, watch what you are doing and use common sense when operating this product. Do not use while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating this product may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Use safety equipment. Always wear eye protection with side shields or goggles and a dust mask. Protect eyes, skin, and lungs against drifting spray and during mixing, filling, and cleaning.
Do not overreach. Keep proper footing and balance at all times. Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the product in unexpected situations.
Do not use the product if the switch does not turn it on and off. Any product that cannot be controlled with the switch is dangerous and must be repaired.
Store the product out of the reach of children and do not allow persons unfamiliar with the product or these instructions to operate the product.
Keep the sprayer and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
Use this product in accordance with these instructions and in the manner intended, taking into account the working conditions and the work to be performed. Use of the product for operations different from those intended could result in a hazardous situation.
Avoid accidental starting. Ensure the switch is in the off position before inserting the battery pack. Inserting the battery pack into products that have the switch on invites accidents.
Use the product only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 987000-432.
When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Have this product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
When servicing the product, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

SPECIFIC SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

DANGER:
Risk of fire or explosion. Do not spray flammable liquids such as gasoline. Look for this symbol reference on the container.

WARNING:
Some spray created from products used with the sprayer contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Follow directions on containers of all such products. To reduce your exposure to these chemicals, wear approved safety equipment such as face masks that are specially designed to filter out sprays, gloves, and other appropri-ate protective equipment.

WARNING:
Before filling the tank, always remove the battery pack. Wipe up any spills before inserting the battery pack. Fol-lowing this rule will reduce the risk of electric shock and corrosive liquids entering the battery pack, which can cause battery pack failure including short circuit resulting in smoke, fire, and/or serious personal injury.

WARNING:
Do not allow conductive or corrosive fluids to get inside the battery pack. If conductive or corrosive fluids are spilled on the battery, refer to the instructions in your battery operators manual.

Before using any sanitizer or other spray materials in this sprayer, read the label on its original container thoroughly and follow its directions. Some spray materials are dangerous and should not be used in this sprayer, as they can damage the sprayer and cause serious bodily injury or property damage.
Electric shock hazard. Never spray toward electrical outlets.
Do not pour hot or boiling liquids into the tank. These can weaken or damage the tubes or tank.
For household and commercial use.
The spray area must be well ventilated.
Avoid spraying on windy days. Spray can be accidentally blown onto plants or objects that should not be sprayed.
Store the sprayer in a secure, well-ventilated indoor space with the fluid tank empty.
Do not use bleach or hydrogen peroxide.
Do not use alcohol based chemicals.
Do not use powders or abrasive chemicals.
Do not use caustic (alkali) or self-heating liquids in this sprayer.
Do not point the sprayer nozzle in the direction of people or pets.
Know the contents of the chemical being sprayed. Read all Safety Data Sheets (SDS) and container labels provided with the chemical. Follow the chemical manufacturer’s safety instructions. It is a violation of federal law to use an EPA-approved disinfectant in a manner inconsistent with its labeling.
Do not leave residue or spray material in the tank after using the sprayer. Clean after each use.
Do not smoke while using the sprayer, or spray where spark or flame is present.
To reduce the risk of fire or explosion use a liquid with a flash point higher than 140°F (60°C).
Risk of injection. Do not discharge directly against skin.
To reduce the risk of electric shock, do not put the sprayer into water or other liquid. Do not place or store the sprayer where it can fall or be pulled into a tub or sink.
Maintain this product. Thoroughly inspect both the inside and outside of the sprayer and examine the components before each use. Check for cracked and deteriorated tanks, leaks, clogged nozzles, and missing or damaged parts. If damaged, have the product repaired before use. Many accidents are caused by poorly maintained products.
Disconnect the battery from the unit before draining, cleaning, or storing the sprayer. Such preventive safety measures reduce the risk of accidental starting.
Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.
Protect your lungs. Wear a face or dust mask when using the sprayer. Following this rule will reduce the risk of serious personal injury. Follow the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.
Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Remove battery pack when tool is not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock.
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
Do not use battery-operated appliance in rain.
Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns
Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Avoid Dangerous Environment – Don’t use appliances in damp or wet locations.
Use Right Appliance – Do not use appliance for any job except that for which it is intended.
Don’t Force Appliance – It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
Store Idle Appliances Indoors – When not in use, appliances should be stored indoors in dry, and high or locked-up place – out of reach of children.
Maintain Appliance With Care – Keep clean for best performance and to reduce the risk of injury. Follow instructions for changing accessories. Inspect appliance cord, and if damaged, have it repaired by an authorized service facility. Keep handles dry, clean, and free from oil and grease.
Check Damaged Parts – Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.

WARNING:
Chemicals and chemical fumes can be hazardous and cause serious injury, permanent damage or death if ingested, inhaled or splashed in eyes or on skin. Fol-low the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.

CAUTION:
To reduce the risk of electric shock, do not touch the nozzle during use.

CAUTION:
Keep all body parts out of the spray pattern.

CAUTION:
When spraying surfaces with the electrostatic function enabled, a charge could build up on the surface poten-tially resulting in a static shock to the user. Carrying a conductive item (such as a key) to touch the surface and dissipate the charge is recommended.

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL| SIGNAL| MEANING
**| DANGER:| Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
**| WARNING:| Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
**| CAUTION:| Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.
| NOTICE:**| (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage).

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter- pretation of these symbols will allow you to operate the product better and safer.

Wet Conditions Alert

| Risk of fire and burns. Do not expose battery, battery compartment, or elec- tronic components to rain, water, or liquids.
| Keep Bystanders Away| Keep all bystanders at least 50 ft. away.
| Slippery Surface| Exercise caution to avoid slipping or falling.
| ****

Recycle Symbol

| This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
V| Volts| Voltage
__| Direct Current| Type or a characteristic of current
PSI| Pressure| Pressure is measured in pounds per square inch

FEATURES

PRODUCT SPECIFICATIONS

KNOW YOUR SPRAYER
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

ELECTROSTATIC TECHNOLOGY
Electrostatic spraying provides better coverage and adhe-sion with an electrostatically charged mist.

3-IN-1 NOZZLE
The 3-in-1 nozzle gives a range of spray particle sizes to fit various applications

PUMP-FREE SPRAYING
The battery-powered sprayer keeps fluid continously cycling through the tank to allow pump-free spraying.

TANK
The tank is marked for measuring up to 1 gal. of liquid.

ASSEMBLY

UNPACKING
This product has been shipped completely assembled.

Carefully remove the product and any accessories from the box. Make sure that all items listed in the Packing List are included.

WARNING:
Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury.

Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call 1- 800-525-2579 for assistance.

PACKING LIST

Sprayer
1 Gal. Tank
Quick Connect Hose Shoulder Bag Nozzle Tool Operator’s Manual

WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.

OPERATION

WARNING:
Do not allow familiarity with the product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.
WARNING :
Do not use any attachments or accessories not recom-mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
WARNING:
Use safety equipment. Protect your eyes, skin, and lungs while mixing, filling, spraying, and cleaning. Failure to do so may result in serious personal injury and damage to property.
NOTICE:
Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or an authorized service center for assistance.

APPLICATIONS
You may use this product for the purpose listed below:

For use with most consumer-grade disinfectants
For use with most consumer-grade home and garden chemicals such as insecticides, fungicides, weed killers and fertilizers

WARNING :
If this product is used for herbicide/insecticide applica-tions do not re- purpose it for use with disinfectants. Obtain a second nozzle set and tool for dedicated use with disinfectants only. Tools used for used for herbicide/insecticide applications are regulated under EPA Federal Insecticide, Fungicide, and Rodenticide Act regulations and are considered contaminated.

WARNING:
Before filling the tank, always remove the battery pack. Wipe up any spills before inserting the battery pack. Fol-lowing this rule will reduce the risk of electric shock and corrosive liquids entering the battery pack, which can cause battery pack failure including short circuit resulting in smoke, fire, and/or serious personal injury.

WARNING:
Always follow the chemical manufacturer’s instructions printed on their product labeling for use, cleaning, and storage. Clean thoroughly after each use, following the instructions in the Maintenance section of this manual. Chemicals should be stored out of the reach of children. Failure to do so may result in serious personal injury. Do not combine chemicals.

WARNING:
Do not allow conductive or corrosive fluids to get inside the battery pack. If conductive or corrosive fluids are spilled on the battery, refer to the instructions in your battery operators manual.

NOTICE:
Remove tank and fill away from sprayer. Clean the exterior of the tank and clean up any spillage before replacing tank.
When adding spray solutions, you may add water and the desired chemical solution directly into the tank, or use a solution that has been premixed in a separate container, then poured into the sprayer, using a funnel if needed. For either method, remember:

Liquids used must be as thin as water. Thicker liquids will not spray properly.
Do not overfill the tank.
NOTE: If using a measuring container or funnel to fill the tank, be sure to thoroughly clean and rinse these items after use. If premixing the spraying solution, rinse the container used for mixing.
To fill:
Turn off the electrostatic function and remove the battery from the unit.
Unscrew the cap and remove it from the tank.
Fill the tank with the desired liquid, up to 1 gal. NOTE: To ensure proper operation of the sprayer, DO NOT fill past the max fill line.
Screw the cap back onto the sprayer, making sure it is tightened securely.
NOTE: Wipe the outside of the tank with a dry cloth and clean up any spills before inserting the tank.
Reinstall the battery pack.

NOTICE:
It is important to thoroughly clean the unit after each use. Allowing liquid to remain in an idle tool for an extended period may cause its moving pieces and connectors to seize up.

CONNECTING THE TANK

Push the male barb on the hose onto the female quick connect on the tank.
Pull on the hose to be certain it is properly secured. NOTE: When using the shoulder bag option, place the tank inside the bag before attaching the hose to the tank.

ATTACHING/DETACHING THE QUICK CONNECT HOSE

To attach hose:

Pull back the quick-connect collar.
Push the hose into place onto the male barb on the back of the sprayer.
Push the collar forward so that the hose is secured properly.
Check to see that the hose is secure.

To disconnect hose:

Pull back and hold the quick-connect collar.
Remove the hose by pulling it from the quick-connect collar.
NOTE: Be careful when disconnecting the hose from the tank because the liquid in the hose will drain from that end. Drain remaining liquid back into container.

INSTALLING/REMOVING BATTERY PACK

WARNING:
Always remove the battery pack form your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.

To install:

Align the grooves on the battery pack with the raised ribs in the battery port and place the battery pack in the tool.
Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the tool before beginning operation.

To remove:

Turn off the electrostatic function and remove the battery from the unit.
Depress the latches on both sides of the battery pack to release the battery pack and remove it from the tool.

For complete charging instructions, see the operator’s manu-als for your battery pack and charger.

WARNING:
Risk of fire or explosion. Spray area must be well-ventilated and away from sparks or flames.

TURNING THE SPRAYER ON/OFF

To turn the sprayer ON, depress the switch trigger.
To turn the sprayer OFF, release the switch trigger.

NOTE: If the sprayer has trouble priming or won’t spray when the tank is filled, the pump has lost its prime. Turn the nozzle selector dial to the largest micron setting. Once the spray is even and consistent, release the switch trigger and rotate the nozzle selector dial to the desired position.

USING THE ELECTROSTATIC FUNCTION

To activate electrostatic mode:

Press switch located on the bottom right side of the unit to ON position.

To deactivate electrostatic mode:

Press switch located on the bottom right side of the unit to OFF position.\

USING THE 3-IN-1 ROTATING NOZZLE

There are three spray pattern settings located on the 3-in-1 rotating nozzle. To select a spray pattern, rotate the nozzle selector to the desired spray pattern.

Low coverage – 65 microns (TX-1.5)
Medium coverage – 85 microns (TG-0.4)
High coverage – 160 microns (TG-1)

NOTE: If nozzles become clogged, see instructions in Main-tenance section to clear blockage.

USING THE SPRAYER

DANGER:
Improper application of cleaning solution can result in SE-VERE INJURY or DEATH. Follow CDC and EPA guidelines for cleaning. Follow the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.

Install the battery pack into the tool.
Direct the sprayer nozzle directly at the surface areas you wish to treat.
Depress the switch trigger to begin spraying.
Release the trigger to stop the spray.
Always empty, clean, and drain the tank after every use as directed in the Maintenance section.
Thoroughly clean the sprayer before storing or before switching to a different chemical. See Cleaning the Unit later in this manual.
NOTE: Wipe the outside of the tank with a dry cloth and clean up any spills before inserting the tank.
When you are finished with the sprayer, thoroughly wash your hands and any area where skin has been exposed to the mist.
Make sure electrostatic function is turned off.
Remove the battery pack and thoroughly clean the sprayer before transporting or storing the unit and before switching to a different chemical. See Cleaning the Unit later in this manual.

OPERATING TIPS

Never point the spray end of the sprayer at yourself or others.
Avoid spraying on windy days. Mist can be accidentally blown onto plants or objects that should not be sprayed.
Never point sprayer in the direction of people or animals; always direct downwind.
Especially in warmer weather, use sprayer in the early morning or late afternoon. Excessive heat can evaporate the mist before it settles.
Never smoke, eat, or drink while operating the sprayer.
Do not touch nozzles when sprayer is in operation.

MAINTENANCE

WARNING:
To avoid serious personal injury, always remove the bat-tery pack from the tool when cleaning or performing any maintenance.

WARNING:
Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.

WARNING:
When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

NOTICE:
Periodically inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or an authorized service center for assistance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:
Do not at any time let brake fluids, gasoline, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

CLEANING THE UNIT

WARNING:
Always store and dispose of chemicals properly. Disposal of contaminated rinse water should be performed accord-ing to local ordinances and bylaws.

Draining the tank:
If there is any liquid left in the tank after spraying, the tank should be drained before cleaning.

Turn off the electrostatic function and remove the battery from the unit.
Remove the tank and unscrew the cap.
Drain the contents of the tank through the fill area. NOTE: Drain the contents back into the original container. Do not store chemicals in the tank.

Cleaning the tank and spray lines:

Fill the tank about one-third full with clean water. A small amount of mild household detergent may be added. NOTE: Never use flammable chemicals or abrasive cleaning agents to clean the tank.
Wipe the outside of the tank with a clean, dry cloth.
Replace the cap.
Reinstall the tank and latch to secure.
Reinstall the battery pack. Spray until the tank has been emptied. Make sure to direct the spray toward an area that will not be damaged by the spray solution.
Refill and repeat the procedure with clean water. It may be necessary to rinse the tank more than once, then drain again as directed above.
Allow all pieces to completely dry before reinstalling parts and storing the unit.
NOTE: Store the sprayer in an upright position. DO NOT store the sprayer on its side.

Cleaning the sprayer:

Fill the tank about one-third full with clean water. NOTE: Never use flammable chemicals or abrasive cleaning agents to clean the tank.
Review chemical SDS sheet how best to secure and store your chemical solution when not in use.
Replace the tank cap and tighten securely.
Reinstall the battery pack. Spray until the tank has been emptied. Make sure to direct the spray toward an area that will not be damaged by the spray solution.
Refill and repeat the procedure with clean water. It may be necessary to rinse the tank more than once, then drain again as directed above.
Allow all pieces to completely dry, then reinstall the tank cap.
Wipe the outside of the sprayer with a clean, dry cloth.

INSTALLING/REMOVING THE NOZZLES

Release the trigger and stop spraying before rotating the nozzle selector.
Turn off the electrostatic function and remove the battery from the unit.
Allow the unit to rest for approximately 5 minutes before attempting to disassemble the nozzle selector to allow the electrostatic charge to disperse.

To remove the nozzle selector:

Rotate the nozzle selector to disassembly position as shown.
Remove the nozzle selector from the slot in the top of the unit.

To remove the nozzles:

After removing the nozzle selector, unscrew the ring on the front of the selector using the nozzle tool.
Remove the retention plate.
Remove nozzles and o-rings from the nozzle selector.

To install the nozzles:

Insert the nozzles and o-rings into the main body of the nozzle selector.
Replace the retention plate onto the nozzle selector.
Replace the ring on the front of the selector by rotating clockwise to tighten. Use the nozzle tool to ensure the assembly is tight to prevent leaks.

To reinstall the nozzle selector:
Insert the nozzle selector in the slot at the top of the unit.

Insert the nozzle tool into the slots of the threaded ring.
Rotate the nozzle selector to the desired nozzle position.

Cleaning the nozzles:

If the nozzles becomes clogged, remove the nozzle selector.
Soak entire nozzle selector in warm soapy water.
If clogs persist, follow the instructions above for removing nozzles.
Soak the nozzles in warm, soapy water then blow out with pressurized air to remove blockage.

When not properly cleaned, the sprayer nozzles may develop residual chemical build up. This could result in decreased pressure and spray patterns.
To reduce the chance of blockage, spray a tank of water through the unit after each use to rinse out any residual chemical build up that may have occurred.

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION
Unit has trouble priming / doesn’t spray when tank is filled.	Pump has lost
its prime.	Turn the nozzle selector dial to the largest micron setting. Once

spray begins, release the switch trigger and rotate the nozzle selector dial to the desired position.
Unit sprays improperly.| Nozzle is clogged nozzle, hose is partially disconnected, or fluid in tank is low.| Rotate to a different nozzle. If that solves the issue then clean out the previous nozzle. Check hose connections and make sure there is sufficient fluid in the tank.
Unit is “spitting”.| Liquid in tank is too thick.| Empty the tank, clean both the tank and filter, then try again. Make sure that all chemicals/liquid used in the sprayer are as thin as water.
Spray is weak.| Filter needs to be cleaned. Solution is too thick.| Clean filter as described in Cleaning the Unit.

Make sure that all chemicals/liquid used in the sprayer are as thin as water.

Unit runs for a short period then shuts off.| Battery needs charging. Solution is too thick.| Recharge the battery.

Make sure that all chemicals/liquid used in the sprayer are as thin as water.