SNAPSHOT 30816 4K Underwater Action Camera Instruction Manual

SNAPSHOT 30816 4K Underwater Action Camera

What’s Included

1. OK Button
2. Switch/Mode
3. Mic
4. Micro SD
5. USB
6. Up
7. Down
8. Waterproof Housing
9. Handle bar/Pole Mount
10. Clip
11. Mount
12. Mount
13. Mount
14. Mount
15. Adhesive

How To Use

Turning On/Off

1. Insert Micro SD card.
2. Use the USB cable to connect to a computer or other device and charge the battery. Your camera can be used while charging.
3. Hold down the power button to turn camera on/off.

Switching Between Modes

1. While the device is on, press the power button.
2. You can switch between recording video, taking photos, slow motion video, file playback, and settings.

Taking Videos/Photos
Taking Video – When the camera is on and in video mode, press the “OK” button to start recording. When recording, a light will flash. Press the “OK” button again to stop recording.
Video modes

• Normal
• Loop recording (2, 3, 5 minutes)
• Time Lapse Video (0.5, 1, 2, 5, 10, 30, 60 seconds)

Taking Photos – When the camera is in photo mode, press the “OK” button to take a picture.

Picture modes

• Normal
• Timer (3, 5, 10, 20 seconds)
• Trajectory (3P/s, SP/s, 1 0P/s)

Slow Motion Video – When the camera is in slow motion mode, press the “OK” button to start recording. When recording, a light will flash. Press the “OK” button again to stop recording.

Slow Motion modes

• 1 080p@60fps
• 720p@120fps

To delete a file, hold down the “OK” button on the file playback screen.

Connecting to WiFi

1. Before connecting to WiFi, install the XDV™ app on your smartphone.
2. To connect to WiFi, hold down the “up” button until the LED indicator light flashes.
3. Ensure your device’s WiFi is turned on, then connect to the “Sport Camera” network. The password is: 1234567890
4. Open the XDV™ app on your smartphone.
5. Scan the QR code below to complete installation.
6. To disconnect from WiFi, press the “up” button until the LED indicator light turns off.

Exporting

To export photos or video, connect the cable to a computer or remove the micro SD card and insert into a card reader.

Caring lnfomation

• Store your camera in shady, dry places.
• If camera needs cleaning, wipe with cloth on targeted areas.
• Do not attempt to clean with liquid cleansers or submerge in water.

Important Safety Information

CAUTION: DO NOT USE DEVICE IF THERE IS OBVIOUS DAMAGE.

WARNING: CAMERA COMES WITH MULTIPLE COMPONENTS FOR HOLDING AND MOUNTING. MAKE SURE CAMERA IS PROPERLY SECURE BEFORE USING.

Important Instructions Before Use

• Take care when using. Severe impacts may damage the product.
• Avoid contact with objects that emit strong magnetic or radio waves.
• Do not use camera in high temperatures or leave exposed to direct sunlight.
• If while charging, the device starts to overheat, smoke, or give off an unsual smell, unplug immediately.
• When using the waterproof case, make sure it is closed securely and firmly.
• The device is only waterproof in its waterproof case.

Customer Service

• Thank you for purchasing SNAPSHOT!

• If you have any inquiries, please visit: support.shelfystand.com

• Our customer support team is happy to help!

• Activate your warranty at shelfystand.com/warranty-registration.html.

Technical Specifications

Waterproof

(wit h housing)

| Up to 30m
Video| MP4, H.264
Storage| Up to 64GB Micro SD card
Port| USB 2.0
Battery| 900MAh, lasts 70-90 minutes

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>