AMASEAUDIO V2 Android 12 Car Stereo Instruction Manual

AMASEAUDIO V2 Android 12 Car Stereo Instruction Manual

5 steps to install

In this case, the installation can’t be plug & play if your car dash radio plug is same as shown on the right picture.

You need to seperately purchase an extension harness for connecting the head unit and the BM54/24 amp in the trunk area.

Please find the ASIN in the listing.

Installation guide

If you are in above three situations, your car should be built-in an amplifier
– BM54/24 tuner in the trunk area. You need to use the extended harness to connect both of them.

The references of BM54 tuner location

Installation steps

1. Connect the power plug to the new head unit.

2. Pull the extension harness to the trunk area as shown.
   

3. Connect the female radio plug of your car with the male plug of extended harness.
   

4. Connect the female plug of extension harness with the amplifier – BM54/24 tuner.
   If the factory plug like below(only 17pin and lack of 4pin). It’s not compatible with our Amaseaudio head unit.
   

Accessories

1. Double check the size and shape of the center console panel.

2. Pry the decoration strip from edge with the plastic tool

3. Take out the decoration strip

4. Remove the 2 fixed screws on the factory CD player with a Philips screwdriver.

5. Take out the factory CD player, the AC controller and the storage box.

Now you can take out the power cable to connect the head unit and then try to turn it on. If this part is no problem, you can do the remain steps.

6. Replace the AC controller to the place of storage box.

7. Remove the 4 fixed screws of the factory mounting bracket with a Philips screwdriver and take out the bracket

8. Connect those wires provided in the package like (1) Power cable with canbus, (2) USB cable, (3) Radio antenna adapter cable, (4) GPS antenna, (5) Wi-fi antenna and (6) External microphone as shown.

Remark:
The USB cable can support USB flash drive, MP3 player and to charge your mobile phone.

Wiring diagram

9. Plug the head unit into the center console, then place the GPS antenna and microphone as shown. The wires are hidden in the side of pillar trim and led to the head unit.

Wire connection for the amplifier, the subwoofer and the headset monitors

Optional : Install a rear camera

Our main unit only syncs the rear camera but not the front camera.

Cable connection

The ASIN of this rear camera has placed in the listing.

System Initial setup

1. Set radio location
   The default radio country in the unit is Europe, if you are from other country, you need to access the “factory mode (PW: 126) > Radio” to adjust the country.
   

2. Set RDS
   The Radio has RDS function but this function is only for Europe, if the clients from other countries use it, it will affect the radio receival, so please close it.
   

3. Set the unit language
   Please go to setting > Languages & input, then you can add the desirable language you need.
   

About after sales service

Q: Do my head unit has one year maintenance?
A: Definitely yes, you will have our commitment after you purchase.
(The maintenance period will base on the date you make the order)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>