AMASEAUDIO E46 7 Inch Android 11 Car Stereo Installation Guide

AMASEAUDIO E46 7 Inch Android 11 Car Stereo

5 steps to install

1. Double check if has any missing before installation.
2. Check

1. Do the screen is broken ?
2. Do the accessories have missing ?

3. Test your unit before installing into your car
   (Connect the power cable to your car)

4. Do the full installation.

5. Test the head unit functions.

Double check if has any missing before installation

In this case, the installation can’t be plug & play if your car dash radio plug is same as shown on the right picture.

You need to seperately purchase an extension harness for connecting the head unit and the BM54/24 amp in the trunk area.

Installation guide

If you are in above three situations, your car should be built-in an amplifier BM54/24 tuner in the trunk area. You need to use the extended harness to connect both of them.

The references of BM54 tuner location

Installation steps

1. Connect the power plug to the new head unit.
2. pull the extension harness to the trunk area as shown.
3. Connect the female radio plug of your car with the male plug of extended harness.

Connect the female plug of extension harness with the amplifier – BM54/24 tuner.

Accessories

1. Power cable *1
2. GPS antenna *1
3. USB adapter cable *1
4. Wi-Fi antenna *1
5. External microphone *1
6. Canbus *1
7. USB adapter cable *1
8. USB adapter cable *1
9. Radio antenna connector *1
10. Disassembly tool *1
11. 3M adhesive *1
12. 15A fuse *1
13. Radio antenna adapter *1
14. Long screw *2
15. A&V output harness *1
16. Disassembly key *2
17. Warrenty card *2

Test your unit before installing into your car
(Connect the power cable to your car)

1. Double check the size and shape of the center console panel.

2. Pry the decoration strip from edge with the plastic tool

3. Take out the decoration strip

4. Remove the 2 fixed screws on the factory CD player with a Philips screwdriver.

5. Take out the factory CD player, the AC controller and the storage box.
   Now you can take out the power cable to connect the head unit and then try to turn it on. If this part is no problem, you can do the remain steps. Do the full installation.

6. Replace the AC controller to the place of storage box.

7. Remove the 4 fixed screws of the factory mounting bracket with a Philips screwdriver and take out the bracket

8. Connect those wires provided in the package like (1) Power cable with canbus, (2) USB cable, (3) Radio antenna adapter cable, (4) GPS antenna, (5) Wi-fi antenna and (6) External microphone as shown.

Wiring diagram

Plug the head unit into the center console, then place the GPS antenna and microphone as shown. The wires are hidden in the side of pillar trim and led to the head unit.

Test the head unit functions.
(FM, SD, USB, Bluetooth, reversing, handbrake, headlight, steering wheel control and etc)

Wire connection for the amplifier, the subwoofer and the headset monitors

Install a rear camera

Our main unit only syncs the rear camera but not the front camera.

Cable connection

System Initial setup

1. Set radio location
   The default radio country in the unit is Europe, if you are from other country, you need to access the “factory mode (PW: 126) > Radio” to adjust the country.

2. Set RDS
   The Radio has RDS function but this function is only for Europe, if the clients from other countries use it, it will affect the radio receival, so please close it.

3. Set the unit language
   Please go to setting > Languages & input, then you can add the desirable language you need.

About after sales service
Q: Do my head unit has one year maintanence?
A: Definitely yes, you will have our commitment after you purchase.
(The maintainence period will base on the date you make the order)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>