SEALEY LED3604 Rechargeable 360° Slim Inspection Light Instruction Manual
- May 15, 2024
- SEALEY
Table of Contents
SEALEY LED3604 Rechargeable 360° Slim Inspection Light Instruction Manual
MODELS: LED3604, LED3604G, LED3604R, LED3604UV
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
2. INTRODUCTION
Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. Exclusive patented design owned by and registered to Sealey. Features super bright SMD LEDs providing up to 600 lumens through the adjustable rotary switch and a 1W LED directional torch. Slimline design with minimum thickness of 9mm. Features a single hanging hook, magnetic base allowing hands-free operation and battery level indicator. High quality 3.7V 2.6Ah lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries. Supplied with a high quality braided USB lead.
3. SPECIFICATION
Model No……LED3604, LED3604G, LED3604R, LED3604UV
Battery………………………………………… 3.7V 2.6Ah Lithium-ion
Charging Time:………………………………………………………….4hr
IP Rating:……………………………………………………………….IP54
LED Type:……………………………………….. 8W & 1W SMD LED
Lumen Output:…………… Side(High/Low)/Top; (600/50)/120lm
Maximum Length………………………………………………… 400mm
Minimum Length…………………………………………………. 390mm
Operating Time:……………..Side(High/Low)/Top; (1.5/16)/10hr
Wavelength UV:…………………………………………… 390-405mm
IMPORTANT WARRANTY INFORMATION
The battery fitted to this lamp is considered to be a consumable item and its
ability to accept a charge will reduce over time. We will provide warranty
against mechanical and electrical defect for a period of one year – this does
not cover fair wear and tear. If the battery is not properly charged before
first use, or regularly conditioned, its capacity will diminish. Under these
circumstances we will not replace the battery regardless of whether the
battery less than one year old.
4. OPERATION
4.1. CHARGING
4.1.1. Remove USB socket cover from the side of the lamp.
4.1.2. Connect the USB lead to the port on the side of the lamp and a USB
power socket. Turn on the power supply.
4.1.3. The battery charge level LED on the side of the lamp will flash green
and show the level of charge.
4.1.4. When the battery has fully charged all the LED’s will turn GREEN.
4.1.5. Switch off power supply, remove charging lead and replace socket cover.
4.2. OPERATION
4.2.1. The lamp has a magnetic base to fix to ferrous materials and a h ook to
hang the lamp.
4.2.2. By pulling the base from the main body the 360°, tilt function can be
used enabling the lamp to be positioned in any direction.
4.2.3. To turn on the lamp rotate the red switch clockwise on the back of the
lamp. Further rotation will increase the brightness of the lamp. Rotate anti-
clockwise to switch off.
4.2.4. To turn on the torch press the red button on the back of the unit,
press again to turn off.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>