Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser Instruction Manual

June 4, 2024
Laserliner

CompactPlane-Laser 3G Pro Three-Dimensional Laser
**Instruction Manual

**

|
---|---

CompactPlane-Laser 3G Pro Three-Dimensional Laser

Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and if the laser device is passed on, this document must be passed on with it.

Function / Application

Three-dimensional laser with 3 bright 360° laser circles

  • The slope-mode feature is an extra that permits gradients to be laid out
  • Simple plumb function thanks to the laser crosses
  • Out-Of-Level: is indicated by optical signals when the unit is outside its self-leveling range
  • GRX-ready: integrated hand-held receiver mode
  • Self-leveling range ± 3°, Accuracy ± 0.35 mm / m
  • Digital Connection interface for remote control of the device

General safety instructions

  • The device must only be used in accordance with its intended purpose and within the scope of the specifications.
  • The measuring tools and accessories are not toys. Keep out of reach of children.
  • Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
  • Do not expose the device to mechanical stress, extreme temperatures, moisture, or significant vibration.
  • The device must no longer be used if one or more of its functions fail or the battery charge is weak.
  • If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and immediately move away from the beam.
  • Under no circumstances should optical instruments (magnifying glass, microscope, binoculars) be used to look at the laser beam or reflections.
  • Do not use the laser at eye level (1.40 … 1.90 m)
  • Reflective, specular, or shiny surfaces must be covered whilst laser devices are in operation.
  • In public areas shield off the laser beam with barriers and partitions wherever possible and identify the laser area with warning signs.

Safety instructions
Using class 2 lasers

Laser radiation!
Do not stare into the beam!
Class 2 laser < 1 mW · 515 nm
EN 60825-1:2014/AC:2017

  • Attention: Do not look into the direct or reflected beam.
  • Do not point the laser beam towards persons.

Safety instructions

Dealing with electromagnetic radiation

  • The measuring device complies with electromagnetic compatibility regulations and limits in accordance with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.

  • Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply.
    Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

  • The measuring accuracy may be affected when working close to high voltages or high electromagnetic alternating fields.

Safety instructions
Dealing with RF radiation

  • The measuring device is equipped with a wireless interface.
  • The measuring device complies with electromagnetic compatibility and wireless radiation regulations and limits in accordance with the RED 2014/53/EU.
  • Umarex GmbH & Co. KG hereby declares that the CompactPlane-Laser 3G radio equipment complies with the essential requirements and other provisions of the

European Radio Equipment Directive 2014/53/EU (RED).
The EU Declaration of Conformity can be found in its entirety at the following address: http://laserliner.com/info?an=AIU

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents, or solvents. Remove the battery(ies) before storing it for longer periods. Store the device in a clean and dry place.

Special product features

Automatic alignment of the device with a magnetically dampened pendulum system. The device is brought into the initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendulum lock during transport.
GRX-READY technology enables line lasers to be used even in unfavorable light conditions. The laser lines pulsate at a high frequency and this can be picked up by special laser receivers over long distances.
The tilt function is not active following the switch-on. Once the device has been set up, press the tilt button to activate the tilt function, enabling you to protect the laser from changes in position caused by the device being disturbed by external factors. The tilt LED flashes to indicate that the tilt function is active. If the position of the laser was shifted through external factors, a signal sounds, the laser flashes, and the tilted LED lights up continuously. Press the tilt button twice to continue.
Erroneous and inaccurate measurements are thus prevented simply and reliably.

The tilt function does not activate monitoring until 20 seconds after the laser has been fully leveled (set-up phase). The tilt LED flashes every second during the set-up phase, and flashes rapidly when the tilt is active.

How the tilt function works

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser - tilt
function works Green laser technology

Approx. 6 times brighter than a typical red laser with 630 – 660 nm

Number and direction of the lasers

H = horizontal laser
V = vertical laser
S = slope function

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser -
1H360

Use of lithium-ion rechargeable battery

  • Use the power supply/charger unit only in closed rooms; do not expose it to moisture or rain otherwise the risk of electric shock.
  • Charge the device‘s battery completely prior to use.
  • Connect the power pack/charger to the mains power supply and the socket in the battery pack. Please only use the power pack/charger supplied. Using any other power pack/charger will invalidate the warranty.
  • The LED on the battery pack lights up red while the battery is charging. When the LED changes to green, charging is complete.

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser -
USB-C

The battery may only be charged with the battery charger provided and used only in this laser device. Any other use may cause injury or fire.
Make sure there are no conductive objects in the vicinity of the battery contacts. Short-circuiting of these contacts can cause burn injuries or fire.
Do not open the rechargeable battery. This could cause short circuits.

Power supply

To insert the lithium-ion rechargeable battery
Open the battery compartment and insert the lithium-ion battery as illustrated.
Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser -
fig1

1. Laser output windows
2. Battery compartment (bottom)
3. Slide switch
a ON
b  OFF / Transport lock / Slope mode
4. 1/4″ / 5/8″ tripod threads (bottom)
5. Battery status| 6. LED leveling
red: leveling off
green: leveling on
7. Laser line selection button;
Hand receiver mode on / off
8. LED hand receiver mode /
LED tilt function
9. Tilt function
---|---

Horizontal and vertical leveling

Release the transport restraint, and push the slide switch (3) to the left.
The laser cross will appear. The laser lines can be switched individually with the selection button.

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser - vertical
levelling

The transport restraint must be released for horizontal and vertical leveling. The laser lines flash and the LED lights red as soon as the device is outside the automatic leveling range of 3°. Position the device such that it is within the leveling range. The LED switches back to green and the laser lines stop flashing (steady light).

Slope mode

Do not release the transport restraint, push the slide switch (3) to the right.
Select the laser with the selector button (7). Sloping planes and tilts can now be measured. In this mode, the laser lines no longer align automatically.
The LED (6) lights are constantly red.

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser - Slope
mode

Hand receiver mode

Optional: Working with the laser receiver GRX

Use a GRX laser receiver (optional) to carry out leveling at great distances or when the laser lines are no longer visible. To work with a laser receiver, switch the line laser to handheld receiver mode by keeping button 7 (handheld receiver mode on / off) pressed.
The laser lines will now pulsate with high frequency, making the laser lines darker.
The laser receiver can detect these pulsating laser lines.Laserliner
CompactPlane-Laser 3G Pro Three-Dimensional Laser - receiver
mode

Observe the laser receiver‘s operating instructions for line lasers.
Due to the special optics required to generate a continuous 360° laser line, the underlying technology may cause differences in brightness in different areas of the line. This may lead to different ranges in hand receiver mode.

Preparing the calibration check

It is possible for you to check the calibration of the laser. To do this, position the device midway between 2 walls, which must be at least 5 m apart.
Switch the device on (Laser cross ON). The best calibration results are achieved if the device is mounted on a tripod.

  1. Mark point A1 on the wall.

  2. Turn the device through 180° and mark point A2.
    You now have a horizontal reference between points A1 and A2.
    Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser - device
through Performing the calibration check

  3. Position the device as near as possible to the wall at the height of point A1.

  4. Turn the device through 180° and mark point A3.
    The difference between points A2 and A3 is the tolerance.
    Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser - calibration
check When A2 and A3 are more than 0.35 mm / m apart, an adjustment is necessary. Contact your authorized dealer or else the UMAREX-LASER LINER Service Department.

Checking the vertical line

Position the device about 5 m from a wall. Fix a plumb bob with a line of 2.5 m length on the wall, making sure that the bob can swing freely.
Switch on the device and align the vertical laser to the plumb line.
The precision is within the specified tolerance if the deviation between the laser line and the plumb line is not greater than ± 2 mm.

Checking the horizontal line
Position the device about 5 m from a wall and switch on the cross laser. Mark point B on the wall. Turn the laser cross approx. 2.5 m to the right and mark point C. Check whether the horizontal line from point C is level with point B to within ± 2 mm. Repeat the process by turning the laser to the left. Regularly check the calibration before use, after transport, and after extended periods of storage.

Data transfer
This device has digital connectivity which allows wireless data transfer to mobile devices such as smartphones or tablets with a wireless interface.
The system prerequisites for a digital connection are specified at http://laserliner.com/info?an=ble
This device can generate a wireless connection to devices that are compatible with the wireless standard IEEE 802.15.4. The wireless standard IEEE 802.15.4 is a transfer protocol for Wireless Personal Area Networks (WPAN). The range is set to a maximum distance of 10 m from the terminal device and greatly depends on the ambient conditions such as the thickness and composition of walls, sources of interference as well as the transmit/receive properties of the terminal device.

Application (app)

An app is required to use the digital connection You can download the app from the corresponding stores for the specific type of terminal device:

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser - app
storLaserliner CompactPlane-
Laser 3G Pro Three-Dimensional Laser - qr codehttps://www.umarex- laserliner.de/commander.html

Make sure that the wireless interface of the mobile device is activated.
After starting the app and activating the digital connection, a connection can be set up between a mobile device and the measuring device. If the app detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it is switched on.

Additional functions via the app
The app offers a range of additional functions. If it is not possible to control your device via the app for technical reasons, reset the device to the factory settings by switching it off and back on again so that you can continue to use the regular functions without problems.

Calibration

The meter needs to be calibrated and tested on a regular basis to ensure produces accurate measurement results. We recommend carrying out calibration once a year.
Technical data ( Subject to technical changes without notice. 21W20)

Self-leveling range ± 3°
Accuracy ± 0.35 mm / m
Leveling automatic
Visibility (typical)* 30 m
Working range with hand receiver 60 m (depends on how the technology affects

the difference in brightness)
Laser wavelength| 515 nm
Laser class| 2 / < 1 mW (EN 60825-1:2014/AC:2017)
Power supply| Li-ion battery pack 7.4V / 2.6Ah
Charging time| approx. 4 hours
Operating time| approx. 9 hours with 3 laser levels
Operating conditions| 0°C … 50°C, max. humidity 80% RH, no condensation, max. working altitude 4000 m above sea level
Storage conditions| -10°C … 70°C, max. humidity 80% RH
Radio module operating data| IEEE 802.15.4. LE? 4.x (Digital Connection) interface; Frequency band: ISM band 2400-2483.5 MHz, 40 channels; Transmission power: max. 10 mW; Bandwidth: 2 MHz; Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS
Dimensions (W x H x D)| 120 x 122 x 80 mm
Weight| 525 g (incl. batteries)

  • at max. 300 lux

EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AIU

Laserliner CompactPlane-Laser 3G Pro Three-Dimensional Laser -
CompactPlane

SERVICE

Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com

Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
Rev21W20

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Laserliner User Manuals

Related Manuals