RUPES 9HB120LT-9HB125LT Li-ION Battery Pack Instruction Manual
- June 9, 2024
- RUPES
Table of Contents
9HB120LT-9HB125LT Li-ION Battery Pack
Instruction Manual
9HB120LT-9HB125LT Li-ION Battery Pack
9HB120LT/9HB125LT Li-ION Battery pack
WARNING
For your personal safety, READ and UNDERSTAND the instruction manual before
using.
EXPLANATION OF SIGNAL WORD
WARNING: Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury and/or property damage.
WARNING
General Battery Safety Warnings
- Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
- Save all warnings and instructions for future reference.
- Always install, operate, inspect and maintain this product in accordance with all applicable standards and regulations (local, state, country, federal, etc.). Compliance is your responsibility. Failure to follow standards and regulations can cause personal injury.
- The term “power tool” in warnings refers to your battery-operated Rupees BIGFOOT NANO Ibid tool HR81M/HR81ML – Q-MAG NANO Ibid tool HQM83/HQM83L.
Electrical Safety
-
Do not expose batteries or power tools to rain or wet conditions. Water entering a battery or power tool will increase the risk of electric shock.
Personal Safety -
Do not modify this product, safety devices, or accessories. Unauthorized modifications may result in electric shock, fire or personal injury.
Battery and Power tool use and care
- Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
- Store idle batteries and power tools out of the reach of children and do not allow persons unfamiliar with the battery or power tool or these instructions to operate the battery or power tool. Batteries and power tools are dangerous in the hands of untrained users.
- Use the battery, power tool, accessories and tools bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the battery or power tool for operations different from those intended could result in a hazardous situation.
- Recharge only with the charger specified cod. 9HC120LT. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. See Li-ION Battery Charger 9HC120LT instruction manual for additional charger specific warnings.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidently occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Immediately stop use and replace any battery that gets excessively warm in use or offers very short usage times. Typically these batteries have a high number of charge/discharge cycles or may be old or damaged. Continuing to use an impaired battery may result in injury or property damage from heat, fire or explosion.
- Do not remove any labels. Replace any damaged label. Labels provide information required for safe use of the product.
- Do not subject batteries to mechanical shock.
- Do not leave a battery on prolonged charge when not in use.
- When possible, remove the battery from the equipment when not in use.
- Do not use the batteries which have been physically damaged.
- Never disassemble the battery pack. Contact a Rupees service facility for all repairs Service.
- Do not dispose of batteries in fire, incinerate or heat above 100°C (212°F). Batteries present a risk of fire or chemical burn if mistreated.
- Responsibly recycle or dispose of batteries in accordance with all applicable standards and regulations (local, state, country, federal, etc.). Improper disposal may endanger the environment.
- Do not open cover or casing. There are no user serviceable items inside. Electric shock or other personal injury may result.
INFORMATION ON PRODUCT SAFETY
Intended Use:
The battery pack 9HB120LT/9HB125LT (Fig. 1) is used as the power source for
Rupees BIGFOOT NANO ibid tool HR81M/HR81ML – Q-MAG NANO ibid tool HQM83/HQM83L
Fig.2.
Summary of device labels containing safety information Symbiology
Symbol
| Description| Symbol|
Description
---|---|---|---
| WARNING: To reduce the risk of injury, user must read instruction
manual|
Li-Ion| Product contains Lithium-Ion.
Do not dispose this product with household rubbish
| CE mark for EU market|
Ah
| Ampere per hour
| Volts Direct Current|
Wh
| Watt per hour
Product specifications
WARNING: for technical data refer to the label of Battery pack 9HB120LT/9HB125LT
Model
| Chemistry| Voltage
(V)| Capacity
(Ah)| Energy
(Wh)|
Weight
(Kg)
---|---|---|---|---|---
9HB125LT| Lithium Ion| 11.| 2,5| 27+27,75| 0.183 ±0.005
9HB120LT| Lithium Ion| 11.| 2| 27+27,75| 0.183 ±0.005
When to charge
Follow the instructions for charging the battery in the operating instructions
for the Power tool HR81M – HR81ML – HQM83 – HQM83L and the Battery Charger
9HC120LT.
Operating temperatures
Rechargeable batteries give their best performance when they are operated at a
normal room temperature. Follow the specifications:
Operating temperature| Charge : 0 to 45°C
Discharge: 0 to 45°C
---|---
Storage temperature| 20-25°
An excessively hot or cold battery may prevent or interrupt the battery from being charged or discharged.
COMPLIANCE WITH EU DIRECTIVE 2006/66/EC
At the end of its useful life, this product pursuant to European Directive
2006/66/EC and its implementation in national law, must not be released into
the environment or thrown away as domestic waste, but must be disposed of an
authorized recycling centers. Disposing of the product correctly contributes
to protecting human health and safeguarding the environment.
CONFORMITY DECLARATION
We declare on our responsibility that the represented battery pack is in
conformity with the directives: RoHS Directive 2011/65/EU, Battery Directive
2006/66/EC. The tests have been carried out in accordance with standard:
EN 62133:2017 + A1:2021;
EN IEC 63000:2018.
Vermezzo con Zero (MI), 01/09/2022
Technical file at: RUPES Spa
Via Marconi, 3/A – Loc. Vermezzo
20071 – Vermezzo con Zero (MI) – Italy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>