OPEN EAR X1 Bone Conduction Headphones User Manual
- May 15, 2024
- OPEN EAR
Table of Contents
OPEN EAR X1 Bone Conduction Headphones
Specifications
- Model: OPENEAR Bone X1
- Type: Bone conduction headphones
- Bluetooth Version: 5.3
- Frequency Response: 20Hz-20kHz
- Connection Range: 210 meters
- Microphone Sensitivity: -42 dB
- Battery Capacity: 180 mAh
- Playback Time: 6 hours (at 80% volume)
- Charging Time: ≤ 2 hours
- Charging Voltage: DC 5V
How to Wear
- Place the OPENEAR Bone X1 on your head, ensuring the bone conduction pads are positioned over your cheekbones.
Power On/Off
To power on: Press and hold the Multi-Function Button (MFB) for3 seconds until
you see white and green LED flashes. For pairing mode, turn on the device.
FAQ
-
Q: How do I reject an incoming call?
A: Double-click on the MFB button to reject a call. -
Q: How do I play/pause music?
A: Click once on the MFB button to play or pause music. -
Q: What should I do if the battery is low?
A: Use the button controls to check the battery level and recharge using the provided USB cable.
User Manual
How to Wear
What’s In the Box
Specifications
- Model: OPENEAR Bone X1
- Type: Bone Conduction
- Headphones BT Version: 5.3
- Frequency: 20Hz-20kHz
- Connection: ≥10m Microphone: -42dB
- Battery: 180mAh Play
- Time: ≥6h(80%volume)
- Charging Time: =2h Charging
- Voltage: DC 5V
Button Control
Power
On/Off Power
On: Press & hold the MFB for 3 sec, white & green led flash. Prompt: power on
pairing.
Power Off: Press & hold the MFB for 3 sec. Prompt: power off.
BT Connection
Select “OPENEAR Bone X1” in BT menu to connect. Prompt: connected.
Answer/Hang
Up A Call Click the MFB once.
Reject A Call
Double-click the MFB.
Play/Pause Music
Click the MFB once.
Previous/Next Track
Previous Track: Press & hold the button +.
Next Track: Press & hold the button -.
Volume Up/Down
Volume Up: Click the button + once.
Volume Down: Click the button – once.
Voice Command
Quick triple click the MFB.
Low
Battery
When battery is lower than 10%, prompt: battery low.
Restore Factory Setting
Under power-off mode, press and hold the MFB for 10sec.
Charge
- Please use DC 5V adapter for charging.
- Green LED is on during charging.
- White LED is on after fully charged.
Attention
- Listening to loud music for a long time may cause discomfort, please use medium volume if possible.Donot use high volume for long periods of time.
- Using headphones will affect your perception of the surrounding environment. Pay more attention when using headphones.
- Do not remove or modify the headphones,as this may cause damage or burn out.
- Do not throw,twist on headphones or put them into a fire.
- Keep it away from fire, hydration and high-pressure equipment.
- Not suitable for children under 10 years old containing small parts.
- Do not classify it as household waste. Please send it to the local electrical equipment recycling station.
Note: The company does not assume any responsibility for the loss of personal property caused by the violation of the above warnings.