SEALEY TP782 Syphon Pump with Segmented Suction Pipe Instructions

: May 15, 2024
: SEALEY

Table of Contents

SEALEY TP782 Syphon Pump with Segmented Suction Pipe
Specifications
FAQ
SAFETY
INTRODUCTION
ASSEMBLY
OPERATION
Warranty
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY TP782 Syphon Pump with Segmented Suction Pipe

Specifications

Model: TP782
Material: Polyethylene
Flow Rate: Approximately 21L/min
Compatible with drum heights from: 420mm to 850mm/205L

Important Information

Sealey reserves the right to alter data, specifications, and parts without prior notice.
No liability is accepted for incorrect use of this product.
The warranty is valid for 12 months from the purchase date; proof of purchase is required for any claims.

FAQ

Q: What should I do if the siphon action stops?
A: If the siphon action stops because the level in the supply container is very low, press down on the handle repeatedly or raise the supply container so it is above the receiving container to restart the flow.
Q: How do I stop the siphon flow?
A: To stop siphon flow at any time, unscrew the air vent cap at the top of the grip. To start the flow again, close the air vent cap and repeat step 4.3 in the operation section.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

WARNING! DO NOT operate using flammable liquids in a confined space, the area should have adequate ventilation.
If pumping flammable liquids, avoid proximity to naked flames or welding operations.
Wear appropriate protective clothing when pumping solvents.
We particularly recommend eye/face and hand protection, available from your authorised Sealey stockist.
Keep children away from areas where solvents are being used.
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
Ensure any spillages are dealt with immediately. Failure to do so could lead to injury.
DO NOT use this pump for HOT WATER.

INTRODUCTION

Easy-to-use polyethylene manual pump with self-priming feature. Equipped with vent cap to stop discharge after use, and 120mm flexible corrugated discharge hose. Segmented suction pipe for height adjustment and easy storage. Suitable for water, oils and non-aggressive chemicals. For use with various drums heights from 420mm, 530mm up to 850mm/205L. Delivers approximately 21L/min. transferring liquids quickly and easily.

ASSEMBLY

Thread Suction Pipe B into Connector under the Pipe A and Pipe C into B with the Connector (fig.1).

OPERATION

Ref fig 2: Place the suction pipe into the supply container opening.
Place the outlet of the discharge hose into the receiving container opening.
Grip the handle, pressing down repeatedly until liquid begins to flow.
Liquid will continue flowing through the discharge hose as long as the level of contents of the supply container is higher than that o f the receiving container.
If the siphon action stops because the level in the supply container is very low, grip the handle, press down repeatedly or raise the supply container so it is above the receiving container.
To stop siphon flow at any time, unscrew the air vent cap at the top of the grip. To start the flow, close the air vent cap and repeat step 4.3.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.