SIEMENS LC67JFN60 Extractor Hood User Manual

SIEMENS LC67JFN60 Extractor Hood

Specifications

• Model: LC67JFN60, LC87JFN60
• Product: Extractor hood
• Brand: Siemens Home Appliances

Safety Precautions
Ensure to read and follow all safety instructions provided in the user manual to prevent any accidents or injuries while using the extractor hood.

Avoiding Material Damage
Regularly clean the grease filters to avoid fatty deposits that may catch fire. Do not operate the appliance without a grease filter installed.

Environmental Protection and Energy Saving
Operate the extractor hood in accordance with the environmental guidelines provided in the manual to save energy and promote environmental protection.

Operating Modes
Familiarize yourself with the different operating modes of the extractor hood to effectively use its features according to your needs.

Familiarizing Yourself with Your Appliance
Take the time to understand all the components and features of the extractor hood to utilize it efficiently.

Before Using for the First Time
Prior to initial use, ensure that the extractor hood is properly installed following the installation instructions provided in the manual.

Basic Operation
Learn how to operate the basic functions of the extractor hood such as adjusting fan speeds and activating the lights.

FAQ (Frequently Asked Questions)

1. Q: How often should I clean the grease filters?
   A: It is recommended to clean the grease filters regularly to prevent any fire hazards. Depending on usage, cleaning them once a month is advisable.

Further information and explanations are available online:

Safety

Observe the following safety instructions.
General information

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

Intended use
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
Only use this appliance:

• For extracting cooking vapor.
• in private households and in enclosed spaces in a domestic environment.
• up to an altitude of max. 4000 m above sea level.

Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

Safe use
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

• Never operate the appliance without a grease filter.

• Clean the grease filters regularly.

• Never work with naked flames close to the appliance (e.g. flambéing).
  Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coal-burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.
  Hot oil and fat ignites very quickly.

• Always supervise hot oil and fat.

• Never extinguish burning oil or fat with wa-ter. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar and leave to cool down.
  When gas burners are in operation without any cookware placed on them, they can buildup a lot of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.

• Only operate the gas burners with cookware on them.
  Operating multiple gas hobs at the same timegenerates a great deal of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.

• Only operate the gas hobs with cookware on them.

• Select the highest fan setting.

• Never operate two gas hobs simultaneously on the highest flame for longer than 15 minutes. Two gas hobs correspond toone large burner.

• Never operate large burners of more than 5 kW with the highest flame for longer than 15 minutes, e.g. a wok.
  Fatty deposits in the grease filters may catch fire.

• Clean the grease filters regularly.WARNING ‒ Risk of suffocation!
  Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from chil-dren.

• Do not let children play with packaging material.
  Children may breathe in or swallow small parts, causing them to suffocate.

• Keep small parts away from children.

• Do not let children play with small parts.

WARNING ‒ Risk of poisoning!
Using aa gas cooking appliance leads to a build-up of heat, moisture and combustion products in the room where the appliance is installed.

• Switch on the extractor hood when using agas cooking appliance.

WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot during operation.

• Never touch these hot parts.

• Keep children at a safe distance.
  The appliance becomes hot during operation.

• Allow the appliance to cool down before cleaning.

WARNING ‒ Risk of injury!

• Components inside the appliance may have sharp edges.

• Carefully clean the appliance interior.
  Items placed on the appliance may fall off.

• Do not place any objects on the appliance.
  Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.

• Do not make any changes to the electrical or mechanical assembly.
  The filter cover may swing out.

• Open the filter cover slowly.

• Take hold of the filter cover after opening it until it no longer swings out.

• Close the filter cover slowly.
  Risk of injury when opening and closing the hinges.

• Keep your hands away from the hinges.
  The light emitted by LED lights is very dazzling and can damage the eyes (risk group 1).

• Do not look directly into the switched-on LED lights for longer than 100 seconds.
  Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.

• If the appliance is defective, call customer service.→”Customer Service”, Page 13

WARNING ‒ Danger: Magnetism!
The appliance contains permanent magnets. They may affect electronic implants, e.g. pacemakers or insulin pumps.

• Persons with electronic implants must stand at least 10 cm away from the appliance.

WARNING ‒ Risk of electric shock
!If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.

• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.

• Call customer services. → Page 13 Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.

• Only use genuine spare parts when repairing the appliance.

• If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.
  An ingress of moisture can cause an electric shock.

• Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.

• Do not use steam- or high-pressure clean-ers to clean the appliance.

• Penetrating moisture may cause an electric shock.

• Do not use wet sponge cloths.

WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the interior of the appliance may cause explosions.

• Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminum parts, e. g. grease filters on extractor hoods.

Avoiding material damage

ATTENTION!
Condensate may cause corrosion damage.

• To prevent condensation from building up, switch on the appliance during cooking.
  If moisture gets into the controls, this may result in damage.

• Never clean controls with a wet cloth.
  Incorrect cleaning damages the surfaces.

• Follow the cleaning instructions.

• Do not use harsh or abrasive detergents.

• Clean stainless steel surfaces in the direction of the finish only.

• Never clean controls with stainless steel cleaners.
  If you put incorrect stress on the design elements, they may break off.

• Do not pull design elements.

• Do not place objects on the design elements or hang objects from them.
  There is a risk of surface damage if you do not peel off the protective film.

• Remove the protective film from all parts of the appliance before using for the first time.

• Painted surfaces are easily damaged.

• Follow the cleaning instructions.→ “Cleaning the appliance”, Page 9

• Ensure that the painted surfaces are not scratched.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.

Saving energy
If you follow these instructions, your appliance will use less power.
Adjust the fan speed to the amount of steam produced during cooking.

• The lower the fan speed, the less energy is consumed.
  Only use the intensive mode as required.
  If cooking produces large amounts of steam, select a higher fan speed in good time.

• The odors are distributed around the room less.
  Switch off the lighting if it is no longer required.

• When the lighting is switched off, it does not consume any energy.
  Clean or replace the filters at regular intervals.

• The effectiveness of the filter is retained.
  Put the cooking lid on.

• The cooking vapors and condensation are reduced.
  Only use the additional functions if required.

• Switching off additional functions reduces power consumption.

Operating modes

Air recirculation

The air which is drawn in is cleaned by the grease filters and an odour filter and conveyed back into the room.

To bind odours in air recirculation mode, you must install an odor filter. The different options for operating the appliance in air circulation mode can be found in our catalog. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from our after-sales service or from the online shop.

Familiarising yourself with your appliance

Overall view
You can find an overview of the parts of your appliance here.

Familiarising yourself with your appliance

1. Glass panel
2. Appliance
3. Filter holder
4. Front odour filter
5. Front grease filter
6. Filter holder
7. Lower odour filter
8. Lower grease filter
9. Glass support

Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

Before using for the first time

Configure the settings for initial start-up. Clean the appliance and accessories.

Setting an operating mode
Your appliance is set to air-recirculation mode by default.

Basic operation

1. Switching on the appliance

• Press ⁠.

The appliance starts at fan setting 2.

Switching off the appliance

• Press ⁠.

Selecting a fan setting

• Press12 ⁠, 3 or ⁠.

Switching on the intensive mode

If particularly strong odors or vapors develop, you can use intensive mode.

• To switch on intensive mode, press ⁠.
  After approx. 6 minutes, the appliance automatically switches to fan setting

Switching off intensive mode

• Reset to the required fan setting.

Switching on the lighting
The lighting can be switched on and off independently of the ventilation system.

• Press ⁠.

Setting the brightness

• Press and hold until the required brightness is reached.

Additional functions in the Home Connect app 1

You can find these functions in the Home Connect app:

1. Intelligent hood control
   With the appropriate hob and the Home Connect app, cooking data is supplied continuously and the appliance uses this to automatically adjust the fan setting and to automatically switch the appliance on and off.

2. Performance profile
   In the Home Connect app, you have the option to set your personal performance profile. You can choose between the noise-optimised or performance-optimised performance profile.

3. Filter saturation
   You can set the saturation indicator in the Home Connect app depending on the filter used.

4. Cooktop-based Hood Control
   You can connect your appliance to a Home Connect-compatible hob and, in this way, control the functions of your appliance via the hob.

5. Fan run-on
   The fan run-on removes the remaining odors and is used to dry the odor filter after the cooking process.

6. Interval ventilation
   In order to regularly ventilate your kitchen, you can use interval ventilation. With interval ventilation, the ventilation system switches on and off in the selected setting for the selected time.

7. Voice Control
   You can control your extractor hood using voice control with Amazon Alexa, for example.

8. Setting the color temperature
   In the Home Connect app, you can set the color temperature for the light from cold to warm.

Home Connect

This appliance is network-capable. Connecting your app to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status.
The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home- connect.com.
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.

Tip: Please also follow the instructions in the Home Connect app.

Notes

• Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app. → “Safety”, Page 2
• Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.
• In networked standby mode, the appliance requires a maximum of 2 W.

Setting up the Home Connect app

1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect.
   The Home Connect app guides you through the entire login process.

Setting up Home Connect Requirements

• The appliance is switched off.
• You have a mobile device with a current version of the iOS or Android operating system, e.g. a smartphone.
• The Home Connect app has been installed on your mobile device.
• The appliance is receiving signals from the WLAN home network (Wi-Fi) at its installation location.
• The mobile device and the appliance are within range of your home network’s Wi-Fi signal.

1. Open the Home Connect app and scan the followingQR code.
   

2. Follow the instructions in the Home Connect app.

Resetting the connection

• To reset the saved connections to the home network and to Home Connect, press twice.

Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimization, troubleshooting or security updates.
To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server.
As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once the installation is successful.

Notes

• The software update consists of two steps.

  • The first step is the download.
    The second step is the installation on your appliance.

• You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically.

• Installation takes a few minutes. You cannot use your appliance during installation.

• We recommend that you install security updates as soon as possible.

Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which
you are using the appliance.
Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.

Data protection
Please see the information on data protection.
The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration):

• Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
• Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
• The current software and hardware version of your appliance.
• Status of any previous reset to factory settings.

This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions can only be utilized with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Hob-based hood control

You can connect your appliance to a suitable hob and, in this way, control the functions of your appliance via the hob.
If the hob and the extractor hood are Home Connect-compatible, connect the appliances in the Home Connect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app.

Notes

• Please note the safety precautions in the instruction manual for your appliance and ensure that they are also observed when operating the appliance via the hob-based hood control.
• Operating your appliance always takes priority. It isnot possible to use the hob-based hood control during this time.
• You can only connect to the extractor hood via the Home Connect app. Other connection routes are no longer supported.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Cleaning products
You can obtain suitable cleaning products from after-sales service or the online shop.WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

• Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.

• Do not use steam- or high-pressure cleaners to clean the appliance.WARNING ‒ Risk of burns!
  The appliance becomes hot during operation.

• Allow the appliance to cool down before cleaning.

ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

• Do not use harsh or abrasive detergents.
• Do not use cleaning products with a high alcohol content.
• Do not use hard scouring pads or cleaning sponges.
• Only use glass cleaners, glass scrapers or stainless steel care products if recommended in the cleaning instructions for the relevant part.
• Wash sponge cloths thoroughly before use.

Cleaning the appliance
Clean the appliance as specified. This will ensure that the different parts and surfaces of the appliance are not damaged by incorrect cleaning or unsuitable cleaning products.

Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the interior of the appliance may cause explosions.

• Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminum parts, e.g. grease filters on extractor hoods.

WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

• Before cleaning, pull out the mains plug or switchoff the fuse in the fuse box.
• Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of burns!
The appliance becomes hot during operation.

• Allow the appliance to cool down before cleaning.

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

• Carefully clean the appliance interior.
  If the appliance is operated by another person via theHome Connect app during cleaning, this increases therisk of injury.

• Before cleaning, disconnect the appliance from theHome Connect app.→ “Resetting the connection”, Page 8

1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 9
2. Clean as follows, depending on the surface:
   • Clean stainless steel surfaces in the direction of the finish using a sponge cloth and hot soapy water.
   • Clean painted surfaces using a damp sponge cloth and hot soapy water.
   • Clean aluminum using a soft cloth and glass cleaner.
   • Clean plastic using a soft cloth and glass cleaner.
   • Clean glass using a soft cloth and glass cleaner.
3. Dry with a soft cloth.
4. Apply a thin layer of the stainless steel cleaning product to stainless steel surfaces using a soft cloth.
   You can obtain stainless steel cleaning products from the after-sales service or the online shop.

Cleaning controls and lights

WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.

• Do not use wet sponge cloths.

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 9

2. Clean using a damp sponge cloth and hot soapy water.

3. Dry with a soft cloth.

Cleaning the magnetic mounting bracket

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 9

2. Clean using a damp sponge cloth and hot soapy water.

3. Dry with a soft cloth.

Removing the grease filter

1. Using two hands, open the glass panel fully until the glass support engages.

2. ATTENTION!
   Falling grease filters may damage the hob below.

   • Grip below the grease filter with one hand. Open the lock on the grease filter and fold down the grease filter.

3. Remove the grease filters from the holders.
   To prevent grease from dripping, hold the grease filters horizontally.

Using two hands, lift the glass panel slightly and close it fully.

Cleaning grease filters manually
The grease filters filter the grease from the cooking vapour.
Regularly cleaned grease filters guarantee a high level of grease removal. We recommend cleaning the grease filters every two months.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

• Clean the grease filters regularly.
  Requirement: The grease filters have been removed. “Removing the grease filter”, Page 10

1. Observe the information regarding the cleaning agents.→ “Cleaning products”, Page 9

2. Soak the grease filter in hot soapy water.
   Use special grease solvent for stubborn dirt. You can obtain grease solvents from customer service or the online shop.

3. Use a brush to clean the grease filters.

4. Rinse the grease filters thoroughly.

5. Allow the grease filters to drain.

Cleaning grease filters in the dishwasher
The grease filters filter the grease from the cooking vapour.
Regularly cleaned grease filters guarantee a high level of grease removal. We recommend cleaning the grease filters every two months.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

• Clean the grease filters regularly.

ATTENTION!
The grease filters may become damaged if they are squeezed in the dishwasher.

• Do not squeeze the grease filters.
  Note: When cleaning the grease filter in the dishwasher, light discoloration may occur. This discolouration has no effect on the performance of the metal grease filters.
  Requirement: The grease filters have been removed. → “Removing the grease filter”, Page 10

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 9

2. Place the grease filters loosely into the dishwasher.

3. Do not clean heavily soiled grease filters with utensils.
   Use special grease solvent for stubborn dirt. You can obtain grease solvents from customer service or the online shop.

4. Start the dishwasher.
   Select a temperature of no more than 70 °C.

5. Allow the grease filters to drain.

Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.

• Grip below the grease filter with one hand.

1. Using two hands, open the glass panel fully until the glass support engages.
2. Insert the grease filters.
3. Fold the grease filters upwards and engage the locks.
4. Ensure that the locks engage.
5. Using two hands, lift the glass panel slightly and close it fully.

Odour filter for recirculating air mode
You can obtain odour filters from the after-sales service or the online shop. Only use original odour filters.
“Accessories”, Page

Replacing the odour filters

1. Using two hands, open the glass panel fully until the glass support engages.

2. Position the front odour filter at the bottom and  swing it up ⁠.
   The foam must be compressed when you insert it.

3. Position the lower odour filter at the back and swing it up .
   The foam must be compressed when you insert it.

4. install the grease filters.

5. Using two hands, lift the glass panel slightly and close it fully.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury! Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• If the appliance is defective, call Customer Service.
  → “Customer Service”, Page 13

WARNING ‒ Risk of electric shock! Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

Malfunctions

Disposal

Disposing of old appliance
Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.
   Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your country is available from our after-sales service, your retailer or on our website.
If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.), production number (FD) and consecutive numbering (Z- Nr.)
You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance’s rating plate.
Depending on the model, the rating plate can be found: ¡ Inside the appliance (remove grease filters for ac- cess).

• On top of the appliance.
  Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Accessories

You can buy accessories from the after-sales service, from specialist retailers or online. Only use original accessories, as these have been specifically designed for your appliance.
Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. → Page 13

You can find out which accessories are available for your appliance in our catalog, in the online shop or from our after-sales service.
siemens-home.bsh-group.com

Clean Air Plus odour filter

– replacement

| LZ11BKB16

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the application with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at siemens-home .bsh-group.com among the additional documents on the product page for your application.

1. Only applies to Great Britain

Hereby, BSH Hausgeräte GmbH declares that the ap-pliance with Home Connect functionality is in compliance with relevant statutory requirements.1
A detailed Declaration of Conformity can be found online at siemens-home.bsh- group.com/uk/ among the additional documents on the product page for your appliance.

GHz band (2400–2483.5 MHz): Max. 100 mW 5-GHz band (5150–5350 MHz + 5470–5725 MHz): max. 150 mW

Statement of Compliance for Great Britain
The full Statement of Compliance according to the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 can be found online at www.siemens- home.bsh-group.com/uk/home among the additional documents on the product page for your appliance.

Product type
This statement of compliance covers the products described in this information for use whose model identifier group is seen on the title page. The full model identifier is made up of the characters before the slash in the product number (E no.) which can be found on the rating plate. Alternatively, you can also find the model identifier in the first line of the UK Energy Label.

Name and address of the manufacturer
BSH Hausgeräte GmbH, Carl-Wery-Strasse 34, 81739 München, Germany
This statement of compliance is prepared by the manufacturer.

• provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1;
• provision 5.2-1 of ETSI EN 303 645 v2.1.1;
• provision 5.3-13 of ETSI EN 303 645 v2.1.1.

Support period
BSH Hausgeräte GmbH will provide security updates that are necessary to maintain the main functions free of charge until at least 28/02/2034.

Information regarding Free and Open Source Software

This product includes software components that are licensed by the copyright holders as free or open-source software.
The applicable license information is stored on your home appliance. You can also access the applicable license information via your Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.
The source code will be made available to you on request.
Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany.

Subject: „OSSREQUEST“
The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

Test information

This information has been produced to facilitate the inspection of the appliance.

• Measured in accordance with EN 61591.

• The appliance is operated in its as-delivered condition

• The intermediate position of the glass front has been used to check the specified appliance properties.

• Ensure that the filters do not move during the measurement (by changing the appliance position to the installation position).

 Installation instructions

Observe this information when installing the appliance.

1. Depending on the appliance specifications

included with the appliance
After unpacking all parts, check for any damage in transit and the completeness of the delivery.

Tip: The retaining bracket for the flue duct section and the small silver and black crews are included in the scope of delivery but are not required for air recirculation appliances.

Dimensions
You will find the dimensions of the appliance here

Safety clearances
Comply with the safety clearances for the appliance.

For Australia and New Zealand, the minimum safety clearance above electrical cooktops must be 600 mm.

Secure installation
Follow these safety instructions when installing the appliance.

WARNING ‒ Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from chil-dren.
• Do not let children play with packaging material.

WARNING ‒ Risk of fire!
The grease deposits in the grease filter may catch fire.

• Never work with naked flames close to the appliance (e.g. flambéing).
• Do not install the appliance near a heat-producing appliance for solid fuel (e.g. wood or coal) unless a closed, non-remov-able cover is present. There must be no fly-ing sparks.
• The specified safety clearances must be complied with in order to prevent a build-up of heat.
• Observe the specifications for your cooking appliances. If the installation instructions for the cooking appliances specify a different clearance, the larger of the two must al-ways be provided for. If gas hobs and electric hobs are operated together, the largest specified clearance applies.
• The appliance must be installed with no more than one side directly next to a tall unit, an upper cabinet or a wall. The distance between the appliance and the tall cabinet, an upper cabinet or the wall must be at least 50 mm.

WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges.

• Wear protective gloves.
  The appliance may fall down if it has not been properly fastened in place.

• All fastening components must be fixed firmly and securely in place.

Risk of injury from glass splinters.

• Protect the filter cover against impact.
• Do not drop the filter cover.
• Wear protective goggles during installation. The appliance is heavy.
• To move the appliance, two people are required.
• Use only suitable tools and equipment.

The appliance is heavy.

• The appliance must not be fitted directly onto plasterboard or similar lightweight materials.
• To ensure correct installation, you must use a material which is sufficiently stable and suitable for both the structural conditions and the weight of the appliance.
• Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.
• Do not make any changes to the electrical or mechanical assembly.

The filter cover may swing out.

• Open the filter cover slowly.
• Take hold of the filter cover after opening until it no longer swings out.
• Close the filter cover slowly.

Risk of injury when opening and closing the hinges.

• Keep your hands away from the hinges.

WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appliance may damage the connecting cable.

• Do not kink or trap the connecting cable. If the appliance or the power cord is damaged, this is dangerous.
• Never operate a damaged appliance.
• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
• If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
• Call customer services. → Page 13 Improper repairs are dangerous.
• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

Incorrect installation is dangerous.

• Connect and operate the appliance only in accordance with the specifications on the rating plate.
• Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
• The protective conductor system of the domestic electrical installation must be properly installed.
• Never equip the appliance with an external switching device, e.g. a timer or remote control.
• When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the conditions of Overvoltage Category III and according to the installation regulations.
• When installing the appliance, check that the power cable is not trapped or damaged.

WARNING ‒ Danger: Magnetism!
The appliance contains permanent magnets. They may affect electronic implants, e.g. pacemakers or insulin pumps.

• Persons with electronic implants must stand at least 10 cm away from the appliance.

General information
Follow these general instructions during the installation.

• For the installation, observe the currently valid build- ing regulations and the regulations of the local electricity and gas suppliers.
• When discharging the exhaust air, the official and legal regulations, such as the regional building code., must be observed.
• In order to freely access the appliance for servicing, select an easy-to-reach installation site.
• The surfaces of the appliance are sensitive. Avoid damaging them during installation.

Instructions for the electrical connection
In order to safely connect the appliance to the electrical system, follow these instructions.

WARNING ‒ Risk of electric shock!

It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket that has been correctly installed.

• The mains plug for the mains power cable must be easily accessible after the appliance is installed.
• If this is not possible, an all-pole isolating switch must be integrated into the permanent electrical installation according to the conditions of overvoltage category III and according to the installation regulations.
• The permanent electrical installation must only be wired by a professional electrician. We recommend installing a residual-current circuit breaker (RCCB) in the appliance’s power supply circuit.
  Sharp-edged components inside the appliance may damage the connecting cable.

Do not kink or trap the connecting cable.

• The connection data can be found on the rating plate. → Page 13
• The connecting cable is approx. 1.30 m long.
• This appliance complies with the EC interference suppression regulations.
• The appliance corresponds to protection class 1.

You should therefore only use the appliance with a protective earth connection.

• Do not connect the appliance to the power supply during installation.
• Ensure that the protection against contact is guaranteed during installation.

Information on the installation situation

• Install this appliance on the kitchen wall.
• To install additional special accessory parts, serve the enclosed installation instructions.
• The width of the extractor hood must correspond at least with the width of the hob.
• To optimally detect the cooking vapors, install the appliance in the middle of the hob.

Installation
Checking the wall

1. Check whether the wall is horizontal and adequately load-bearing.
   The maximum weight of the appliance is 30 kg.

2. Drill the hole depth in accordance with the length of the screws.

3. Use the enclosed screws and wall plugs.
   The enclosed screws and wall plugs are suitable for use with solid brickwork. Use suitable fixing material for other structures, e.g. plasterboard, porous concrete, poroton bricks.

4. Install the appliance with a fixing material which is sufficiently stable and has been adjusted accordingly for both the structural conditions and the weight of the appliance.

5. Check the cut-out area for existing cables of other appliances.

Preparing the wall

1. Observe the information on the installation situation.
   → Page 17

2. Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes are to be drilled.

3. Cover the hob to prevent damage.

4. Determine the position of the extractor hood and lightly mark where the lower edge of the appliance should be on the wall.

   • Determine the centre of the hob.
     Comply with the safety clearances for the hob. We recommend fitting the extractor hood in such a way that the lower edge of the glass panel is in line with the lower edges of the adjacent wall-hung cabinets.

5. To make the installation easier, apply and secure the packaging section that is used as the template to the line that is marked out.

6. Mark the positions of the fastening screws.

7. It is preferable to mark the position for the safety screw on the right-hand side.

8. Drill the hole depth in accordance with the length of the screws.

9. Insert the wall plugs flush with the wall.

Installing the appliance bracket

1.  Align the appliance bracket for the extractor hood and screw it on hand-tight.

Use a spirit level to align the appliance bracket horizontally and screw it firmly in place.

Installing the appliance

1. Remove the grease filters.
   To avoid causing damage, do not bend the grease filters.

2.  Attach the appliance.

3. Screw the knurled nuts onto the safety screw by hand and tighten them hand-tight.

4. Position the front filter holder diagonally upwards and insert it into the tabs. Push the lower filter holder in so that it audibly engages.
   

5. Insert the lower filter holder so that it audibly engages.

6. Insert the glass support in the opening and fold it down as far as it will go.

7. Align the glass panel at an angle of 90° to the appliance.

8. Insert the glass panel in the opening on the appliance and lock it into place.

9. Insert the glass support in the opening on the glass panel and lock it into place.

10. Insert the grease filters.

11. Connect the appliance to the power supply.

Fitting the air recirculation deflector

1. Push the air recirculation deflector onto the air-pipe connector until the air recirculation deflector audibly engages.

2. To change the air circulation, turn the air recirculation deflector clockwise or anti-clockwise.

3. Wind up the cable on the air recirculation deflector.

Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG

Valid within Great Britain:

Imported to Great Britain by BSH Home Appliances Ltd.

• Grand Union House
• Old Wolverton Road
• Wolverton, Milton Keynes

MK12 5PT

• United Kingdom
• BSH Hausgeräte GmbH
• Carl-Wery-Straße 34
• 81739 München, GERMANY siemens-home.bsh-group.com

References

• Welcome to Siemens Home Appliances International
• Siemens Home UK | Technology meets Design
• Connect your household | Home Connect
• Siemens Home UK | Technology meets Design

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>