hama ECO-10 Wireless Charger Instruction Manual
- June 13, 2024
- Hama
Table of Contents
- ECO-10 Wireless Charger
- Operating Instructions
- Controls and displays
- Explanation of warning symbols and notes
- Package contents
- Safety instructions
- Start-up and operation
- Care and maintenance
- Warranty disclaimer
- Technical data
- Declaration of conformity
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wireless Charger
“ECO-10”
ECO-10 Wireless Charger
Operating Instructions
Controls and displays
- USB-C input
- Status LED
LEDfunction indicator
Power supply| Brieflylights up, 1x blue, 1x red
Standby| off
Charging process| Lights up blue, then goes off
End of charging| off
Error message| Flashes alternately redand blue
1) The display at the end of charging may differ on some devices, dependingonthe manufacturer.
Thank you for choosing aHama product.
Take your time and read the following instructions andinformation
completely.Please keep these instructions in asafe place
forfuturereference.Ifyou sellthe device, please pass these operating
instructions on to the new owner.
Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated
product parts that may carry
hazardousvoltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- “ECO-10” Wireless Charger for Smartphones
- 1x USB-C cable
- These operating instructions
Safety instructions
- Protect the product from dirt, moistureand overheating and use itindry environments only.
- Do not drop the product and do not exposeittoany major shocks.
- Do not operate the product outside the power limits specified in the technical data.
- Do not use the product in areas in which electronic products arenot permitted.
- Ensurethat the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
- Dispose of packaging materialimmediately in accordance with the locally applicable regulations.
- Do not modify the product in any way.Doing so voids the warranty.
- Do not continue to operate the product if it is visibly damaged.
- Use the product only for the intended purpose.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Only use the article under moderate climaticconditions.
- As with allelectrical products, this device should be kept out of the reach of children.
- Do not use the product in adamp environment and avoid splashingwater.
- Do not bend or crush the cable.
- Never apply force when using the product or during installation.
- Take carethat components such as airbags,safetyareas, controls, instruments, etc. and visibility arenot blocked or restricted.
- Ensurethat the product is securely mounted beforeevery journey.
- Do not allow yourself to be distracted by the productwhen driving avehicle. Alwayspay attention to the surrounding trafficand your environment.
- Always pulldirectly on the plug when disconnecting the cable, never on thecable itself.
Risk of electric shock
-
Do not open the device or continue to operate it if it becomes damaged.
-
Do not use the product if the
AC adapter,the adapter cable or the mains cable aredamaged. -
Do not attempt to service or repair the product yourself. Leave any and allservice work to qualified experts.
Do not place any bank or similar cards with magnetic strips or magnetically
sensitive objects on the product.
The data on the cards could be damaged or completely deleted.
Warning
Ensurethat thereare no metal parts (e.g. metal plate for magnetic holders) on
theback of your device.
Metal heats up significantly in the field of an induction charger and can
damage your device and/or the charger.
Start-up and operation
Warning
- Only operate the product from asocket that has been approved for the device. Thesocket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
- If using amulti-socket power strip, make surethatthe total power consumption of allconnecteddevices does not exceed the power strip’s maximum throughput rating.
- If you willnot be using the product for aprolonged period, disconnect it from mains power.
Note
- To be able to charge your device via the wireless charger,itmust becompatible with induction charging technology.Please refer to the operating instructions of your device for more information.
- Note that mobile phone cases, covers, etc., and other materials between thewireless chargerand the back of your device may interferewith or even prevent the charging process.
- Connect the enclosed USB-C cable to the USB-C input (1) of theinductive charger and asuitable USB charger.When doing so, consultthe operating instructions for the USBcharger.
Note
- The maximum charging power of up to 10 Wisonlyachieved with aQualcommquick charging device (5 V/2A,9V/1.67 A).
- The active power supply is confirmed by the status LED (2)brieflylightingupblue red.
Warning
Do not use defective chargers or USB ports and do not attempt to repair them.
- Place your device with its back on the inductive charger (B).
- The charging process begins as soon as an effective induction field has been established. Thestatus LED (2) lights up solid blue and then goes out. The current charge status is displayed on your device.
- If no induction connection canbeestablished, change the position of yourdevice if necessary (B).
- The charging process ends automatically once your device’sbattery is fully charged.
Care and maintenance
Only clean this product using alint-free, slightly damp cloth and do not use any harsh cleaners.Ensurethat no water is able to enter the product.
Note
Disconnect the device from the mains beforecleaning andduring prolonged
periods of non-use.
Warranty disclaimer
Hama GmbH &CoKGassumes no liability and provides nowarranty for damage resulting from improper installation/mounting, improper use of the productorfromfailure to observe theoperatinginstructionsand/ or safety notes.
Technical data
Wireless charger
Input| 9V **** 2.0 A
Output (under optimised conditions)| 5W/7.5 W/10W max.
Dimensions| 108mm x103mm x10,5mm
Declaration of conformity
**** Hama GmbH &CoKGhereby declares that the radio equipment type [00187280] is in compliance with Directive 2014/53/EU.The fulltext of the EU declaration of conformity is available at the following Internet address: www.hama.com -> 00187280 -> Downloads.
Frequency band(s) | 110.60 –140.00kHz |
---|---|
Maximum radio-frequency power transmitted | 6.31 dBµA/m at 10 mdistance |
Hama GmbH &CoKG
86652 Monheim /Germany
www.hama.com
+49 9091 502-0
Alllistedbrandsare trademarks of thecorresponding companies. Errors andomissions excepted, andsubject to technicalchanges.Our generalterms of delivery andpayment areapplied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>