ENSTO FL12xxx Luminaire Seams from Single Instruction Manual
- June 15, 2024
- ENSTO
Table of Contents
ENSTO FL12xxx Luminaire Seams from Single
Product Information
Specifications
- Product Name : FLIP
- IP Rating : IP66
- Energy Efficiency Class : D
Dimensions
| Luminaire | L1 L2 min / max | W | H1 | H2 |
|---|---|---|---|---|
| FL12xxx | 800 / 1150 | 86 | 76 | 93 |
| FL12xxx with control device | 900 / 1250 | 86 | 76 | 93 |
| FL15xxx | 1100 / 1430 | 86 | 76 | 93 |
| FL15xxx with control device | 1200 / 1530 | 86 | 76 | 93 |
Tightening Torque
| Metric Size | Torque |
|---|---|
| M20 | 3 Nm |
| M25 | 4 Nm |
Electrical Connections
- ON / OFF
- DALI
- 3N 12 L N D1+ D2-
- PE
- N
- L
Tamperproof
- Max Screw Size : M6
- Min Distance : 70 mm
Installation Warnings
- The installation must only be done by an electrician with the appropriate qualifications.
- Keep this manual for future installation and service.
- Do not dispose of electrical and electronic devices including their accessories with the household waste.
- When the luminaire is at the end of its life cycle, it must be disposed of according to local recycling guidelines.
Product Usage Instructions
-
Step 1: Dimensions and Placement
Measure the available space for installation and ensure it meets the minimum and maximum dimensions specified in the user manual. -
Step 2: Electrical Connections
Connect the luminaire to the power supply using the provided electrical connections. Follow the wiring diagram for proper connection. -
Step 3: Tightening Torque
Use the specified tightening torque values when securing the luminaire and electrical connections to ensure proper installation. -
Step 4: ON / OFF and DALI Settings
Configure the luminaire’s ON / OFF and DALI settings according to your desired lighting control preferences. Refer to the user manual for detailed instructions. -
Step 5: Tamperproof Installation
If tamperproof installation is required, use screws with a maximum size of M6 and ensure a minimum distance of 70 mm between the luminaire and any other objects. -
Step 6: Maintenance and Disassembly
For maintenance or disassembly, refer to the user manual for detailed instructions on how to safely perform these tasks. -
Step 7: Recycling
When the luminaire reaches the end of its life cycle, follow the local recycling guidelines for proper disposal.
Frequently Asked Questions (FAQ)
-
Q: Who should install the luminaire?
A: The installation must only be done by an electrician with the appropriate qualifications. -
Q: Can I dispose of the luminaire with household waste?
A: No, do not dispose of electrical and electronic devices including their accessories with the household waste. Follow local recycling guidelines for proper disposal.
Installation and operating instructions
Dimension
Assembly
Tamperproof
Disassembly Instruction
The
installation must only be done by an electrician with the appropriate
qualifications.
Keep this manual for future installation and service.
This product contains a light source of energy efficiency class D.
WARNING
Danger of electric shock! Risk of fire!
- Improper installation can cause personal injury and property damage.
- Switch off the current before installation or maintenance.
- The control circuit must be separated from mains voltage by basic insulation.
- Use only starters, light sources and rated wattage as marked in the luminaire.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Do not dispose of electrical and electronic devices including their accessories with the household waste. When the luminaire is at the end of its life cycle, it must be disposed of according to local recycling guide-lines.
Ensto Building Systems Finland Oy
- Ensio Miettisen katu 2, P.O. Box 77
- FIN-06101 Porvoo, Finland
- Tel. +358 204 76 21
- www.ensto.com/building-systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>