whirlpool W10505928RP Refrigerator Connection Water Valve Instruction Manual
- May 15, 2024
- Whirlpool
Table of Contents
whirlpool W10505928RP Refrigerator Connection Water Valve
Installation Instructions
IMPORTANT : Connector for use with water in accessible locations only.
IMPORTANT : Be sure to identify water supply connection before beginning
installation procedure. Application of this connector with incorrect water
supply connection may cause leaks to appear.
-
Refrigerator Connecffon w/Waler Valve
Thread one end of braided ice maker connector to the refrigerator water inlet. Hand tighten, then wrench tighten 1 /4 turn more.
-
Water Supply Line Connection w/Compression Union
Thread one end of the braided ice maker connector onto the 1/4″ OD x 1/4″ OD compression union. Hand tighten, then wrench tighten 1/4 turn more. Attach other end of 1 /4″ OD x 1 /4″ OD compression union to the household water line. Hand tighten, then wrench tighten 1/4 turn more. -
Water Supply Line Connection w/Water Supply Shut Off Valve
Thread one end of the braided ice maker connector to the water supply shut off valve. Hand tighten, then wrench tighten 1/4 turn more. -
Turn on Water Supply and Check for Leaks. If Any Appear, Carefully Tighten Nuts Further.
- Tools for Installation: Wrench.
Why Buy This Connector?
Appliance Care Products from Whirlpool Corporation are stringently tested
before being approved for consumer home use. Buy from the manufacturer
committed to Safety and Satisfaction in every appliance accessory we provide.