KLUS PDS-STN-ALFA Bracket Instruction Manual
- June 4, 2024
- KLUS
Table of Contents
KLUS PDS-STN-ALFA Bracket
Mounting Instructions
- PDS-STN-ALFA Mounting bracket (product made to order)
- Screw*
- Lighting fixture*
- Power supply (12 V / 24 V)*
*The full range of accessories and electronics is available atwww.KlusDesign.eu
NOTE! All LED tapes must be connected to a 12 V or 24 V power supply.
IMPORTANT: Not all possible mounting procedures are presented here.
More mounting procedures and related accessories can be found at
www.KlusDesign.eu.
Drawings of extrusions and accessories in these instructions are simplified
and only approximate the actual shapes.
a) Mounting the fixture into mounting brackets screwed to the surface
Attach the mounting bracket (1) to the surface with appropriate screws (2)
(not provided).
Feed the power cable from the fixture to the power supply (4)
Snap the lighting fixture (3) into the brackets.
b) Installation of the fixture with brackets mounted on the profile
Attach mounting brackets (1) to the fixture (3).
Feed the power cable from the fixture to the power supply (4).
Attach the fixture with brackets to the surface with appropriate screws (2)
(not provided).
Documents / Resources
| KLUS
PDS-STN-ALFA
Bracket
[pdf] Instruction Manual
PDS-STN-ALFA Bracket, PDS-STN-ALFA, Bracket
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>