MH-110570 USB in Line Amplifier for TV Antenna Instruction Manual

: May 15, 2024
: ANTENNA

Table of Contents

Jolt Switch Amplifier
Installation Instruction
LIMITED 90-DAY WARRANTY
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MH-110570 USB in Line Amplifier for TV Antenna

MH-110570 USB in Line Amplifier for TV Antenna

Jolt Switch Amplifier

Amplificador Jolt Switch
USB Power Adapter (style may vary)
Adaptador de corriente USB (el estilo puede variar)

Installation Instruction

Attach the coaxial cable from the antenna to the amplifier as shown.
Connect the coaxial cable attached to the amplifier to the ANT/IN connector on the back of the TV.
The amplifier gives you control in real time when managing your TV signals. The simple ON/OFF switch allows you to bypass amplification when a TV channel doesn’t need it. The amplifier arrives in the ON position, increasing TV signals for a clearer picture and sound. When the switch is OFF, easily bypass the amplifier while signals are still being filtered from cellular and FM interference. You only need to rescan for channels if you move or reconnect the antenna.
The amplifier must be powered for amplification. Plug the amplifier’s USB cable into an open USB port on the back of the TV. If your TV does not have a USB port, use the included power adapter with any standard 120V wall outlet.

NOTE: You cannot attach the male connector on the amplifier’s coaxial cable to the antenna or the antenna and amplifier will not work. Use a separate coaxial cable (not included) between the antenna and the amplifier, then connect the amplifier’s coaxial cable to your TV.

Scan for channels.
In the TV’s setup menu, set the tuner mode to ”Antenna” or “Air.” Then, set the TV to “scan” for channels. This may be listed as auto-program, auto-scan, channel search, or channel scan. Refer to the TV manual for detailed instructions.

Amplifier Regulatory Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the use(s authority to operate this device.

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tJy to correct the interference by one or more of the following measures:

Reorient or relocate the antenna.
Increase the separation between the equipment and converter box.
Connect the equipment into an ouffet on a different circuit from which the converter box is connected.
Consult the dealer or an experienced radio/TV technician for help.

LIMITED 90-DAY WARRANTY

Antennas Direct” Inc. warrants this product against any defects in materials or workmanship for ninety (90) days. No warranty claim will be honored unless, at the time the claim is made, you present proof of purchase from an authorized Antennas Direct” Inc. dealer.

Antennas Direct” Inc. will either repair or replace the defective product at no charge to you. This warranty covers parts but does not cover any costs incurred in the removal or reinstallation of the product. This limited warranty does not apply if the product is damaged or falls due to: misuse, improper installation, abuse, and modification of the product as originally manufactured by Antennas Direct.

Antennas Direct” Inc. will not assume any liabilities for any other warranties, expressed or Implied by any other person.
The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort, or otherwise, and Antennas Direct” Inc. shall not be liable for incidental or consequential damage or commercial loss, or for any other loss or damage, as set forth above.

Model # MH-110570