Shenzhen Yolax Acoustics X6 Wireless Earphone User Manual
- June 10, 2024
- Shenzhen Yolax Acoustics
Table of Contents
Yolax Acoustics X6 Wireless Earphone
User Manual
X6 Wireless Earphone
NOTES!
- To make safety, we strongly recommend you to read the manual and operate strictly according to requirements
- Please use standard charger to charge the earphone in case of causing battery damaged
- Repeat charging or discharging the earphone will cause battery performance reduction. It is normal for rechargeable battery
- Please keep away from fire when using the earphone
- Please do not make the ports blocked, such as charging port, LED and earphone etc.
- Please don’t use the earphone at high volume or for a long time to avoid affecting the user’s hearing
- Please don’t disassemble the earphone for any reason in case of damaging the product
- Please don’t clean the earphone with oil or other corrosive cleaning agents.
Please don’t use the earphone in potentially dangerous places.
Overview & Introduction
- Multi-function button
- HD Microphone
- Earphone charging ports
- Speaker
- Charging box LED
- Charging case charge port
ACCESSORIES
- User manual * 1
- USB cable * 1
- Bluetooth earphone * 2
- Charging case *1
Quick Pairing
First Step
Open the charging box, take out R/L earphones and wear L/R correctly. After
hearing the power on voice for about 1-3 seconds, the earphones will have
-drip- voice prompt,indicating that the UR earphones are paired successfully.
Second Step
Open your mobile phone’s Bluetooth function,click Search and then click”X6″ to
connect. We once have connected the earphone and device. When open the
earphone and device’s bluetooth function, the earphone and device will be
automatic reconnection.
Touch Control 
Charging Instruction
-
Earphone Charging
When R earphone is placed in charging box, the R light Is on: When L earphone is placed in charging box, the L light is on, and the earphone start power charging. The indicator light will goes off alter the earphone are fully charged. -
Charging Case Charging
When charging box in charge, the indicator light flashes then keep long on when its fully charged. When charging box charge for earphone, the indicator light is always on. When lower battery the light flashes. Please use safety regulation 5V/1A adapter to charge power.
Specifications
Model No.: X6
Bluetooth Version: 5.3+EDR
Bluetooth Protocol: HFP/HSP/A2DP/AVRCP
Earphone battery:35mA
Charging box battery: 300mA
Music/Talking Time: > 5 hours
Standby Time: > 100 hours
Charging Time: 1 hour
Charging Times: Charging case charge earphone > 4 times
Notes! The product parameters will be different depending on the model,
use mode, environment, etc
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF warning for Portable device: The device has been evaluated to meet general
RF exposure requirement. The device can be used importable exposure condition
without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>