CAD GXLIEM Wireless In-Ear Monitor System User Guide
- June 6, 2024
- CAD
Table of Contents
GXLIEM
Wireless In-Ear Monitor System
Manual and Quick Start-up Guide
The GXLIEM Wireless IEM System is available in 3 configurations. A Single Mix transmitter, Dual Mix transmitter, and Quad Mix transmitter base station that transmits discrete mixes to your performers. With near-infinite bodypack receiver monitoring, this solution is the most flexible in the industry – useful when setting up multiple mixes with a high bodypack receiver count. The systems’ Frequency Agile design aids in the assurance of a clean, clear, channel plan. In addition, the bodypack receiver has a high contrast display, featuring a battery life indicator. The bodypack receiver is supplied with MEB1 high-performance earbuds. The robust, rack-mountable, all-metal transmitter is supplied with rack ears and a half-wave antenna. Systems are supplied with equal quantity bodypack receivers to transmitters.
GXLIEM
Wireless In-Ear Monitor System
Introduction
Enjoy the easy and exciting performance that the GXLIEM™
Wireless In-Ear Monitor system provides for your next performance.
CAD Audio has been creating valued products since 1931 and prides itself on
developing and supporting the live performer. Our concept was straightforward.
Develop a high-value wireless IEM System that can cope with today’s
challenging RF environment and deliver superior
audio quality.
The GXLIEM Wireless In-Ear Monitor System features:
-
Available as a Single Mix (GXLIEM), Dual Mix (GXLIEM2) or
Quad Mix (GXLIEM4) Transmitter Base Station System -
16 Channel Frequency Agile performance
-
High Dynamic Range for outstanding fidelity
-
High Contrast LCD Display
-
Battery Life Indicator on Bodypack Receiver
-
Operates in 900 MHz bands, free from TV and FCC regulatory issues
-
Advanced dipole antenna technology on the bodypack receiver for an increased operating distance
-
All-Metal Transmitter Chassis for shielded operation, 1/2U or 1U.
-
AA Battery Life of >10Hrs of operation
-
2-YearWarranty
System Components
All systems include:
- Transmitter
- 1/4″ (6.35mm) audio cable (1pc/2pcs /4pcs)
- BNC antenna (1pc / 2pcs)
- Power supply
- Bodypack Receiver (1pc / 2pcs /4pcs)
- Earbuds (1pc /2pcs/4pcs)
- Rack ears
- Antenna relocation cable
- User guide
Operating Instructions/System Setup
-
Apply power and press the power switch. The following screen appears at power-up.
Fb = Frequency Band
90 = 902 – 928MHz -
Default display shows the current transmitting channel.
Setting
the transmitter frequency -
Channel adjustment. A long press of the UP and DOWN button unlocks channel adjustment.
When the channel numbers are flashing, press the UP or DOWN button to select a channel.
Setting the bodypack receiver frequency
- ScanLink™ is enabled by pressing the DOWN and UP buttons simultaneously for one second. Hold the receiver ScanLink interface
towards the flashing LED to set receiver frequency.
Should you need to temporarily turn off the transmitter
Transmitter power enables/disable.
Transmitter power can be temporarily disabled by holding the DOWN and UP
buttons for more than 3 seconds until the screen to the right appears. To
enable, hold both the DOWN and UP buttons at the same time until the default
interface appears.
Transmitter GXLIEM/GXLIEM2/GXLIEM4
- Power switch
- LCD display
- IR Node
- Channel down button
- Channel up button
- Volume control. Adjust the headphone monitor volume.
- Headphone Jack. 1/4″ (6.35mm) headphone monitor jack
- Power jack
- 1/4″ (6.35mm) audio input jack. Connect to audio sources, such as mixer monitor send.
- BNC antenna connection
- Audio signal level indicator
Single-channel front view
Dual channel front view
Quad-channel front view
Single-channel rear view
Dual-channel rear view
Quad-channel rear view
Bodypack GXLIEMBP Receiver
| 
---|---
- Antennas
- LCD display
- IR Node
- Battery compartment
- Power switch and volume control
- Earphone jack
- Line out jack
- Belt clip
- RF Signal indicator
- Low battery indicator (flashes when low)
T Band 902-928MHz
| CH | MHz | CH | MHz |
|---|---|---|---|
| 0 | 903.25 | A | 911.325 |
| 1 | 903.825 | B | 916.85 |
| 2 | 904.875 | C | 925 |
| 3 | 905.325 | D | 925.65 |
| 4 | 905.975 | E | 926.85 |
| 5 | 906.575 | F | 927.65 |
| 6 | 907.225 | ||
| 7 | 908.425 | ||
| 8 | 909.075 | ||
| 9 | 910.875 |
Specifications GXLIEM Wireless In-Ear Monitor System
Frequency Response …………………………………………………. 20Hz – 20KHz
Frequency Band ……………………………………………. T Band 902 – 928MHz
Dynamic Range ………………………………………………………………….. >110dB
Channels ……………………………………………..16 Channel Frequency Agile
Transmitting Power……………………………………………………………… 30mW
Displays …………………………………………………………………………………. LCD
Receiver Output ……………………………………. Line out and earphone out
Receiver Power requirements ……………………………… 2x AA alkaline or rechargeable
battery
Receiver Battery Life …………………………………………………………….>10hrs
Receiver Dimensions (LxWxH) ……………………………..3.77″x2.44″x8.26″ (96mm x 62mm x
210mm)
Transmitter Dimensions (LxWxH)
4″x12″x12″ (212mm x 177mm x 44mm) Single and Dual
4″x22″x12″ (483mm x 177mm x 44mm) Quad
Transmitter Weight ………..5lbs (2.26Kg) : 7lbs (3.17Kg) : 12lbs (5.44Kg)
WARNING! USE AS LOW A VOLUME AS POSSIBLE.
PERMANENT HEARING DAMAGE CAN RESULT FROM USING THIS SYSTEM AT EXCESSIVE
VOLUMES.
For the safe operation of this in-ear monitor system, do not listen to
excessive sound pressure levels. Most national safety and health
administrations have established guidelines for the maximum time being exposed
to sound pressure levels before hearing damage occurs.
85 dB(A) SPL at 8 hours
88 dB(A) SPL at 4 hours
91 dB(A) SPL at 2 hours
94 dB(A) SPL at 1 hour
97 dB(A) SPL at 30 minutes
100 dB(A) SPL at 15 minutes
120 dB(A) SPL — avoid or hearing damage may occur
In live settings, it is difficult to make exact measurements of Sound Pressure
Levels
(SPL) present at the eardrum, which is affected not only by the in-ear monitor
volume but by ambient sound on the stage and other factors.
To protect your ears from hearing damage:
- Use the in-ear monitor system at the lowest volume possible; turn up the volume only enough to hear.
- Be aware that ringing in your ears may indicate that the volume is set too high.
- Have your ears been examined regularly by an audiologist?
- If wax builds up in your ears, stop using the in-ear monitor system until you have seen an audiologist.
- To avoid infections, use an antiseptic to wipe the earphones before and after using the system.
- Stop using the earphones if you experience ear discomfort or infection.
Individuals with cardiac pacemakers and other similar medical devices should consult with their physician before using any RF devices. Though the output level of this wireless system is below 50 milliwatts, the proximity of the transmitter to the implant device could pose a threat.
As with any wireless product, environmental conditions can reduce or in some cases prohibit a successful connection between the transmitter and the receiver.
This device complies with Part 15 of the FCC Rules. Most users of CAD Audio wireless products in the United States do not need a license for operation. However, the rules for unlicensed operation state that this device must not operate in excess of 50 milliwatts and it must not cause harmful interference to other wireless devices and must accept interference received from other devices. Wireless products meeting CAD factory standards adhere to these rules. The FCC reserves the right to change these rules at any time. For more information contact the FCC at 1-888 -CALL-FCC (TTY: 1-888 -TELL-FCC) or visit the FCC’s wireless microphone website at:
www.fcc.gov/cgb/wirelessmicrophones
Two-Year Limited Warranty
CAD Audio hereby warrants that this product will be free of defects in
material and workmanship for a period of two years from the date of purchase.
In the unlikely event that a defect occurs CAD Audio will, at its option,
either repair or replace with a new unit of equal or greater value. Retain
proof of purchase to validate the purchase date and return it with any
warranty claim.
This warranty excludes exterior finish or appearance, damage from abuse,
misuse of the product, use contrary to CAD Audio’s instructions or
unauthorized repair. All implied warranties, merchantability, or fitness for a
particular purpose is hereby disclaimed and CAD Audio hereby disclaims
liability for incidental, special or consequential damages resulting from the
use or unavailability of this product. This warranty gives you specific legal
rights and you may have other rights that vary from state to state. Some
states do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above
exclusions and limitations may not apply to you.
Note : No other warranty, written or oral is authorized by CAD Audio.
CAD Audio Corporate Offices
6573 Cochran Rd., Bldg. I Solon, OH 44139 U.S.A.
Tel: 440-349-4900 Fax:
440-248-4904
www.cadaudio.com
Distributed Worldwide by American Music and Sound
925 Broadbeck Drive, Suite 220
Newbury Park, CA 91320 U.S.A.
Tel: 800-431-2609 Fax:
800-431-3129
©2020 CAD Audio Part No. 62278-04 -00 Sep2020