Eseed Y11 Smart Watch Instruction Manual
- June 27, 2024
- Eseed
Table of Contents
Eseed Y11 Smart Watch
Product Specifications
- Model: [Insert Model Number
- RF Exposure Compliance: General RF exposure requirements met
- Usage: Portable exposure condition without restriction
Product Usage Instructions
Safety Precautions:
Before using the device, please read all safety precautions mentioned in the
user manual to ensure safe operation.
Power On/Off:
To power on the device, press and hold the power button for a few seconds. To
power off, repeat the same process.
Smartwatch Instruction Manual
Please read the instructions carefully before using it.
The Charging and Activation of Smartwatch
Use a 5V-1A charger to charge, charging time is more than 2 hours, if the
watch is not used for a long time, be sure to turn off the watch, and keep
charging once a month.
APP nFitCloudPron downloading
Android : Search for FitCloudPro in the App marketplace to download it.
IOS : Search FitCloudPro in the App Store for downloading. Or download it
by scanning the QR code.
Procedure for Bluetooth connection
- Connect to Bluetooth: Open the FitCloudpro APP, please turn on the Bluetooth function of the phone and the watch. When searching for Bluetooth, you can use the Bluetooth name or MAC address of the watch.
- Please make sure that the watch is not bound to other accounts, and that the watch and the phone are as close as possible. Before using Bluetooth to make a call, ensure that the call icon on the watch control screen is open so that you can search the Bluetooth of the watch normally. Open the About interface under the Watch Settings menu. After the watch binding is successful, the watch will automatically connect to the
- mobile phone every time you open the client. You can synchronize data by dropping down on the client data page.
Operation Instruction
Key function
Up button: Long press to turn on/off, short press to enter the menu on the
dial interface, press twice in a row to switch menu mode, short press to
return to the function on other interfaces;
Next button: You can customize the button function in the settings section
-
Control center
Function overview: non-disturbing, Power-saving mode, flashlight, Voice assistant. audio switch brightness, settings, phone tracking, power saving mode, system information -
ca11 function
This function requires the connection of audio Bluetooth. When entering the dial, you can press the phone number and dial it as required. Long press 2s on keyboards 7 and 9 to enter and#. -
Common contact
Common contacts: You need to set and add them in the common contacts bar of the app side, and the set common contacts will be automatically synchronized to the device. A maximum of 10 contacts can be added. -
can record
You can save the latest 10caa records. -
Voice Bluetooth
Car Bluetooth: Divided into “call audio” and “media audio” switches.
Car audio: 11 is used to switch to call by Bluetooth.
Media audio: It is used to switch to play media audio. (Disabled by default.) -
You can turn on the media audio only when the voice audio is enabled.
-
When “media audio” is on, tum off ·can audio, the” media audio “switch will be closed simultaneously;
-
In the case of (2), turn on “call audio”, and the “media audio” switch will be opened synchronously
-
sports data
Display the number of steps, distance, and calorie data recorded on the day and the number of steps in the last seven days. You can set the target number of steps, distance, and calories in the APP -
sports
Sports mode options: 6+1 (walking, running, mountaineering, cycling, skipping, basketball, badminton, football, yoga (as alternative sports that can be pushed), click the icon to start sports, you can support 110+ kinds of sports push in the APP terminal. -
sports record
On this screen, you can view your latest 10 exercise history records, including exercise duration, heart rate, and calories -
heart rate
When entering the heart rate measurement interface, the green light at the bottom will start to measure. When the measurement is completed in about 45 seconds, there will be a vibration reminder. If the warning is “no watch”, you need to wear the watch again. It can display the user’s current heart rate interval and 24-hour heart rate curve. -
blood pressure
When entering the blood pressure measurement interface, the green light at the bottom will start to measure, and there will be a vibration reminder when the measurement is completed in about 45 seconds. The measurement is based on PPG technology. The user’s last seven blood pressure readings can be displayed. -
Blood oxygen
When entering the Blood oxygen measurement interface, the green light at the bottom will start to measure, and there will be a vibration reminder when the measurement is completed in about
45-60 seconds. The measurement is based on PPG technology. The user’s last seven Blood oxygen readings can be displayed. -
sleeping
21:30-12:00 Display the sleep monitoring status of the day and the latest seven days. The data is updated every day, which can be synchronously saved when connected to the Iha APP, and the Iha device will recalculate the data information for the next day. Sleep monitoring period: 21:30-12:00 -
woman health
After the watch is connected to the APP, women’s health alert can be shown on the APP to view woman’s health alert information on Iha watch -
music
When the watch is connected to the APP, it can control the pause and start of the mobile music player, volume adjustment, and song-switching -
weather
After the watch is connected to the APP, the weather interface wiR displays real-time weather temperature and weather type. -
information
After the watch is connected to the APP, you can open the push to read the relevant information on the APP terminal. The watch terminal can receive the corresponding push messages and save up to 15 latest messages -
clock
After the watch is connected to the APP, you can set a single alarm clock, or a cyclic alarm clock, or up to five alarms -
stop watch
Click the start button to start the liming, click the pause button to stop the liming, and click the reset button to return the liming to zero. A maximum of 99 records can be saved -
timer
In the timer function, the system presets a common time period. You can click the corresponding time period to start Iha time quickly or click the customized button to set the time. CHck the start button to start the liming, click the pause button to stop the liming, click the reset button to return the timing to zero -
Mobile phone checking
After the Iha watch is connected to the APP, click to find Iha mobile phone, The mobile phone terminal will ring, and the watch terminal will show that the search is successful; If the watch is not connected to the APP, the watch terminal will prompt that it is not connected. -
settling
The settings function includes screen display (switching dial, brightness adjustment for screen duration, turning wrist screen duration), language, vibration intensity menu style, battery, two-dimensional code, and system, Added custom keys -
Breathing training
During breathing exercises, there are options for 1 minute and 2 minutes. Users click on the corresponding time to perform, breathing training. Click start and follow the icons in the breathing training to inhale when zooming in in and exhale when zooming out -
calculator
Numeric input is up to 7 digits (negative input is not processed), and the calculated result is up to 8 digits. If the result exceeds the calculated value, the display means it cannot be calculated -
calendar
Display the current year, month, and day, and slide down to display the calendar. -
water-drinking reminder
It can be opened in the App[device-drink water reminder], after opening, you can set the start time, ending time, and reminder interval -
sedentary reminder
It can be opened in the APP[device – sedentary reminder], after opening, you can set the start time, ending time, and non-disturbing period -
Voice assistant:
After the watch is connected to the APP, enter the voice assistant and say the functions and software you want to open on the phone. -
Business card
Support social business card push -
Camera
Activate the watch end and shake it to take a picture
F&Q
- The watch cannot be turned on.
- Press and hold the power button for more than 3 seconds. Or the power of the battery is low. Charge it in time.
- The Bluetooth is not connected or cannot be connected
- Restart the watch and reconnect it
- Please try to restart the Bluetooth of the phone and connect it again
- Do not connect the phone to other Bluetooth devices at the same time
Measuring heart-rate/blood pressure/oxygen/ECG is not accurate
- Generally, when doing the measurement, the watch sensor and the human body have poor contact.
- Please pay attention to the full contact of the sensor and wrist when measuring
- For people with darker skin and more am, hair, please do the enhanced measurement in the Ap device -enhanced measurement
Sleep data are not accurate enough
- Sleep monitoring simulates the natural time of falling asleep and getting up. The watch should be worn nom, ally.
- Sleep too late or sleep before wearing, there may be errors
- Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 PM to 12:00 noon the next day. For more frequently asked questions, please visit the App[my-FAQ
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>