BEARTAIN H16 Bone Conduction Wireless Headphones User Manual

Bone Conduction
Wireless Headphones
User Manual
H16

• Thank you for purchasing Bone Conduction Wireless headphones.
• War n ing: Please make sure to follow the safety precautions for this and all electrical products, failure to do so and misuse may result in a fire or personal injury. This manual contains important information to prevent accidents.
• After reading the manual completely, please use the product correctly and keep the manual in a safe place for future reference.

Precautions

To avoid personal and property harm, please follow the precautions listed below for safe use and storage

  Danger

| Do not short the terminals of the power supply.
Do not carry or store the power supply with small metal objects such as metal necklaces, keys, and coins.
| Do not heat it, place it on or near heat sources, and do not throw it in fire.
Do not charge, use or place it at a high temperature; doing so may cause overheating, ignition or explosion.
| Do not submerge it or use it to charge when wet; to prevent the risk of electrical shock never use it in wet areas.
  Warning

| Due to the influence of emitted sound waves, do not use them while on an airplane or close to medical equipment.
| To prevent accidents when using it outdoors, please be aware of the surrounding traffic environment.
| Do not disassemble, tamper, or modify the unit.
| If you have a pacemaker, you must keep this device at a distance of more than 22 cm (8.66 inches) away from it.
| Never charge it with wet hands, to prevent electrical shock.
| Avoid throwing the device or hard impact to it.
| Always keep it out of the reach of infants and children as they may accidentally wrap the headphone cord around their neck or swallow the earpiece and cause suffocation.
  Note

| Please use and store the device in a dry and dust-free environment.
| When using this product, do not turn up the volume too much. Long-term use at a high volume may adversely affect hearing. To avoid the impact of an initial very high volume, switch the volume to low and gradually increase the volume to adjust as needed.

Package List

Please check the Package List first
Before use, please check that all the items in the package are included. If any of the components are damaged or missing, please contact the store where you purchased the product immediately.

Package List

Product Overview & Wearing Instructions

Product Overview

① Charging Interface
② LED Indicator
③ Microphone| ④ Left Button
⑤ Right Button
⑥ Breathing Light
---|---

Wearing Instructions

• Refer to the picture on the right, place the bone conduction headset on the front of the ear and turn the hook back to wear it.
• This product comes with earplugs. If you are bothered by the surrounding sounds, use the earplugs as needed.

Operation

Turning on or off

On| Press and hold the right button for 3 seconds to turn on the main units.
The LED on the main unit flashes for 3 seconds in blue, then the LED on the main unit flashes alternately in red and blue, and you will hear a tone through the headphones[Power on], then the unit is turned on.
---|---
Off| Press and hold the right button for 5 seconds to turn off main units.
When you want to turn off the device, press and hold the right button for 5 seconds, the LED on the main unit flashes in red and you will hear a tone through the headphones[Power off], then the unit is turned off.

Breathing Light Mode

–When Listening to music
The indicator light turns green when playing music.
When the music is paused, the light goes out.
When Calling
When you receive an incoming call, the indicator light flashes in green.
The indicator light turns green during the call.
How to turn on or off the breathing LED light
Press and hold the multi-function right button for 2 seconds to turn off/on the breathing LED light. When you restart the headphones, the Breathing LED will light up.

How To Pair (First Pairing)

Pairing is the operation of initially connecting this Bluetooth headset to a playback device (such as a mobile phone, etc.) via Bluetooth technology.
Please make sure to complete Bluetooth pairing before the first use.

1. The headset must be fully charged and disconnected from the power source. Prepare the headset and Bluetooth device.
   • Do not place any obstacles between the two devices, and keep both devices at a maximum distance of 1m (approximately 3.2 feet).
   • Make sure that the Bluetooth device is turned on.

2. Long press the power button on the right for about 3 seconds.
   • While the power is turned on, the LED indicator turns blue and holds for 3 seconds, then the red and blue LEDs flash alternately.
   • Enter search mode (search for available devices). In the search mode, The red and blue LEDs will flash alternately and you will hear the [Pairing] tone through your headphones. Wait for the name H16 to appear on your screen and follow the pairing steps.

3. Connect and pair
   How to connect and pair
   When the name H16 of this product (headphone) is displayed on the Bluetooth device, select it and perform connection pairing. Once successfully paired
   The headset is ready to start playing when you hear the voice prompt [Connected].

4. Note:
   • Supportable configuration files: This main unit supports Bluetooth standard Ver.5.0 (profile. HSP / HFP, A2DP, AVRCP).
   • Some devices that support multiple configuration files require configuration file selection. In this case, please choose one of the files on the above. We cannot guarantee that the main units support other configuration files other than the above files.
   • When the units you are trying to connect to are performing Bluetooth communication with other peripheral units, it will not be able to pair with this unit. In this case, please disconnect from the other device before pairing with this unit.
   • After adding it, if the connection is abnormal or cannot be connected normally during use, please try pairing it again.
   • When a device that has been connected to Bluetooth headphones before is turned on the Bluetooth function, the headphones will automatically connect to the previous device. But if you use a new device that was not connected to Bluetooth headphones, please attempt to reconnect the device with the operation instructions.
   • If the headphones are connected to a device that you did not expect, please turn off the device or turn off the Bluetooth, and then try pairing it again.
   • These units can pair up to 8 Bluetooth devices. After each connection, if you do not delete the connection record on the phone, it can connect automatically next time. However, when the wireless headphones have been connected to more than 8 Bluetooth devices, the earliest device of the eight will be forgotten to make room for newer devices.

Audio Control

consecutively
To skip to the next music track| Press the right function key 3 times consecutively
To increase the volume| Press the right function key twice consecutively
To decrease the volume| Press the left function key twice consecutively

Example: To increase the volume while listening to music or calling, press the function key twice consecutively. Please note that if the function key is not pressed rapidly twice the device will not adjust the volume as desired.

Calling

button on either the left or right to answer a call.
To reject an incoming call| When wearing your H16 headphones, long-press the button on either the left or right for 2 seconds.
To end a call| When wearing your H16 headphones, press the button on either the left or right to end a call.

Charging

Operation
Your H16 Bone Conduction Wireless headphones come with a portable charging cable. Before using the main units for the first time, you must charge them. The LED indicator turns red during charging and turns blue when the headphones are fully charged.

Note

• The maximum communication distance, charging time, playing/calling time, and standby time are for reference only and may vary depending on use conditions.
• When using for the first time, please fully charge the battery before use.
• This product cannot be used while charging.
• Always use the included cable for charging. If it is connected through another charging cable, it will not charge correctly. Do not use the supplied charging cable with other devices.
• If the unit is connected to a computer, the computer will not be able to charge normally after it enters the power-saving mode.
• When charging from a household power outlet, please use a USB charging AC power adapter (sold separately).
• If the battery is not used for a long time, the battery life may be shortened. After repeated charging and discharging several times, it can be fully charged.

Bluetooth Wireless Technology and Specifications

What is Bluetooth

For computers, audio systems, digital cameras, etc., Bluetooth is a wireless technology for short-distance communication between digital devices, without having to use USB and/or audio cables; you can enjoy music and make calls through wireless communication up to a distance of about 10m (32.8 feet) between this device and the main source.

Specifications

(Class2)
Modulation method/frequency band| 2.402—2.480MHz
Play frequency band| 150Hz – 20KHz
Charging time| About 2.5 hours
Playable/Call time| Approximately 8 hours (35% volume)
Standby time| About 200 hours
Allowable working temperature/humidity| Temperature: 0-40℃  Humidity: 20-80% (No condensation)
Waterproof performance| IPX7
Dimensions| Width 105mm x Height 42mm x Depth 142mm
Mass| About 33g
Accessories| Charging cable, earplugs, operating Instruction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>