VIESSMANN SI1800 Condensate Pump Instruction Manual
- May 15, 2024
- VIESSMANN
Table of Contents
VIESSMANN SI1800 Condensate Pump
Product Information
Specifications:
- Model: SI 1800
- Edition: N922/00 Edition 15/46
- Power Supply: Electric
- Maximum Flow Rate: Varies based on height of delivery
- Maximum Delivery Height: Varies based on flow rate
- Operating Type: Automatic
- Sound Level in Application: Not specified
Product Usage Instructions
1. Installation:
Ensure all pipe connections are secured with a Jubilee clip or cable tie.
2. Initial Setup:
a. Power Connection (Fig. 10): Connect the power cable to an electrical outlet. Follow local installation regulations.
3. Hydraulic Connection:
Mount the pump horizontally under the condensate discharge of the device. Ensure there is enough space around the pump for cooling. Do not crush condensate tubes. Use a cable conduit if needed.
4. Operation:
Replace defective products without any claim for damages or other additional compensation.
Frequently Asked Questions
- Q: Can I operate the pump before ensuring the machine complies with relevant directives?
- A: No, it is prohibited to put the pump into service before the machine it is incorporated in complies with machine directive 2006/95/CE and electromagnetic compatibility directive 2004/108/CE.
- Q: What are the pressure losses mentioned in the manual based on?
- A: The pressure losses listed in the manual are calculated based on a 10mm hose inner diameter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>