VIESSMANN Vitotrol 100-E Wireless Remote Control for 1 Heating Circuit Instruction Manual

VIESSMANN Vitotrol 100-E Wireless Remote Control for 1 Heating Circuit

Abridged Operating Instructions for System Users: VIESMANN Vitotrol 100-E Wireless Remote Control for 1 Heating Circuit

Safety Instructions

• Follow safety instructions to prevent accidents and material losses
• The danger symbol warns against the risk of injury
• The note contains additional information
• Intended for system users
• The appliance can be operated by children aged 8 and older, as well as by individuals with reduced physical, sensory or mental faculties or those lacking in experience and knowledge, provided such individuals are supervised or have been instructed in the safe use of this appliance and any risks arising from it
• Wireless signals can interfere with electronic medical devices, particularly pacemakers, hearing aids, and defibrillators. If any such equipment is fitted, users should avoid being in the immediate vicinity of operational wireless components
• All settings and work on the device must be carried out as specified in these instructions
• Observe minimum clearances to ensure reliable signal transmission
• Only operate the devices inside closed buildings
• Never operate devices in rooms where there is a risk of explosion
• After a restart, check the status of the wireless components
• Check the appliance for external damage. Never start up a damaged appliance.
• For replacement, use only spare parts supplied or approved by Viessmann

Overview of Controls

Fig. 1:

• A: Operating buttons
• B: Current time
• C: Current actual room temperature
• D: Symbols

Operating Buttons:

• Settings: Scroll through the menu. Confirm selection or change.
• OK: Confirm the function Extended heating/Extend time phase once. Select the set room temperatures for the temperature levels.

Symbols on the Display

• General symbols: Low power radio connection to the Viessmann appliance has been established. The child lock is active.
• Temperatures: Room heating with reduced room temperature, Room heating with normal room temperature, Room heating with comfortable room temperature, Backs up DHW heating in On/Off status or by schedule (Auto mode), depending on the Viessmann heat generator.
• Operating programs: Frost protection is active. The heating is active. Extended heating/Extended time phase one is active. DHW is heated according to the time program. DHW heating is permanently off. DHW heating is permanently on.
• Messages: Fault, Replace the battery.

Settings Menu

• Schedule time for room heating
• Date
• Format of the weekday display
• Time format
• DHW ON/OFF
• DHW SCHED SETPOINT TEMP PROF (Reduced, Normal, Comfort)
• Device information: Battery, RF range, SW version, Adjust
• Language
• Child lock
• Reset

Product Usage Instructions

• Follow safety instructions closely to prevent accidents and material losses
• Ensure that the wireless signals do not interfere with electronic medical devices, particularly pacemakers, hearing aids and defibrillators. If any such equipment is fitted, users should avoid being in the immediate vicinity of operational wireless components
• Carry out all settings and work on the device as specified in the instructions
• Observe minimum clearances to ensure reliable signal transmission
• Only operate the devices inside closed buildings
• Never operate devices in rooms where there is a risk of explosion
• Check the status of the wireless components after a restart
• Do not start up a damaged appliance
• Use only spare parts supplied or approved by Viessmann for replacement
• Use the operating buttons to scroll through the menu, confirm selection or change settings
• Confirm the function Extended heating/Extend time phase once by pressing / OK button. Select the set room temperatures for the temperature levels
• Refer to symbols on the display for general symbols, temperatures, operating programs and messages
• Choose and set the schedule time for room heating, date, format of the weekday display, time format, DHW ON/OFF, DHW SCHED SETPOINT TEMP PROF (Reduced, Normal, Comfort), device information (battery, RF range, SW version, adjust), language, child lock or reset as required

Safety instructions

Please follow these safety instructions closely to prevent accidents and material losses.

Safety instructions explained

Danger
This symbol warns against the risk of injury.
Note
Details identified by the word “Note” contain additional information.

Target group

• These instructions are intended for sys-tem users.
• This appliance can also be operated by children aged 8 and older, as well as by individuals with reduced physical, sen-sory or mental faculties or those lacking in experience and knowledge, provided such individuals are supervised or have been instructed in the safe use of this appliance and any risks arising from it.

Danger

• Wireless signals can interfere with electronic medical devices, particularly pacemakers, hearing aids and defibrillators.
• If any such equipment is fitted, users should avoid being in the immediate vicinity of operational wireless components.

Installation and adjustment

• All settings and work on the device must be carried out as specified in these instructions.
• Observe minimum clearances to ensure reliable signal transmission.

Operation of the system

• Only operate the devices inside closed buildings.
• Never operate devices in rooms where there is a risk of explosion.
• Protect devices from:
• Moisture
• Dust
• Liquids
• Vapours
• Direct sunlight
• Other direct thermal radiation
• After a restart, check the status of the wireless components.

Danger

• Damaged equipment poses a safety hazard.
• Check the appliance for external damage. Never start up a damaged appliance.

Auxiliary components and individual parts

• For replacement, use only spare parts supplied or approved by Viessmann.

Overview of controls

• A: Operating buttons
• B Current time
• C: Current actual room temperature
• D Symbols

Operating buttons

• Settings
• Scroll through the menu. Confirm selection or change.
• Confirm the function “Extended heat-ing”/”Extend time phase once”. Select the set room temperatures for the temperature levels.

Symbols on the display

• General symbols

• Low power radio connection to the Viessmann appliance has been established.

• Child lock is active.

Temperatures

• Room heating with reduced room temperature Room heating with normal room temperature Room heating with comfort room temperature Backs up DHW heating in On/Off status or by schedule (Auto mode), depending on the Viessmann heat generator.

Operating programs

• Frost protection is active.
• Extended heating”/”Extend time phase once” is active.
• DHW is heated according to the time program.
• DHW heating is permanently off.
• DHW heating is permanently on.

Messages

• Fault
• Replace battery.

Symbols during operation

• While settings are being made.
• Time program: Active time phase

Settings menu

Note
Depending on the equipment level of your system, not all of the settings and checks listed may be available.

Time programs

In the time programs you determine what your heating system should do at what time. For this, divide the day into sections. These are called time phases. Subject to the system equipment level, up to 4 time phases are available. For each time phase, you define a start time and an end time.

Time program for room heating

• Different temperature levels with adjustable room temperatures are active within and outside these time phases:
• Reduced room temperature “REDUCED” , automatically active outside the active time phases, e.g. at night or during regular absences
• Normal room temperature “NORMAL” , adjustable within active time phases
• Increased comfort room temperature “COMFORT” , adjustable within active time phases

Factory setting:

• One time phase with temperature level “NORMAL” from 06:00 to 22:00 for all weekdays to 20 °C
• Outside active time phases, temperature level “REDUCED” to 3 °C

Time program for DHW heating

Factory setting:

• 05:00 to 22:00 to 50 °C
• Viessmann Climate Solutions SE
• 35108 Allendorf / Germany
• Telephone: +49 6452 70-0
• Fax: +49 6452 70-2780
• www.viessmann.com
• Viessmann Limited
• Hortonwood 30, Telford
• Shropshire, TF1 7YP, GB
• Telephone: +44 1952 675000
• Fax: +44 1952 675040
• E-mail: info-uk@viessmann.com
• 6204928 Subject to technical modifications.

Documents / Resources

| VIESSMANN Vitotrol 100-E Wireless Remote Control for 1 Heating Circuit [pdf] Instruction Manual
Vitotrol 100-E Wireless Remote Control for 1 Heating Circuit, Vitotrol 100-E, Vitotrol 100-E Wireless Remote Control, Wireless Remote Control for 1 Heating Circuit, Wireless Remote Control, Wireless Remote Heating Circuit, Remote Control Heating Circuit, Heating Circuit, Circuit
---|---

References

• Vier Generationen – ein Unternehmen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>