PHILIPS AIS8540 Ironing Solutions User Manual
- May 15, 2024
- Philips
Table of Contents
PHILIPS AIS8540 Ironing Solutions
What’s in the Box
Safety
Assembly and Installation Instructions
Figure 6: Insert the board into the pole slot then lock the clip to
secure the board.
Figure 7: Insert the board clips into the slots till you hear a click
sound.
Figure 1: Unlock the 2nd clip from the top.
Figure 2: Push the board down to horizontal position.
Figure 3: Lock the clip.
The appliance is suitable to be used with tap water. However, if you live in an area with hard water, we recommend that you mix an equal amount of tap water with distilled or demineralized water. This will prevent fast scale build up and prolong the lifetime of the appliance.
Press steam trigger for 10s before ironing to prevent water stains on garment.
Figure 2: Press steam trigger twice quickly for continuous steam. If you want to stop continuous steam, press steam trigger once. After 8 minutes of continuous steam, steam will stop automatically, this is normal.
Figure 2: It switches off automatically after blinking for 10 minutes.
Support
If you have any problems, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Center in your country.
PHILIPS and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of
Versuni Holding B.V., and Versuni Holding B.V. is the warrantor in relation to
this product.
2023 © Versuni Holding B.V
4239.001.2382.2 (06/02/2023)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>