Hi-Target T100 Ruggedized In-Vehicle Tablet User Manual

: May 15, 2024
: Hi-Target

Table of Contents

Hi-Target T100 Ruggedized In-Vehicle Tablet
Specifications
USING INSTRUCTION
Product Installation
Product packing list
Working environment
FCC
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hi-Target T100 Ruggedized In-Vehicle Tablet

Specifications

Model name : T100
Trademark: Hi-Target
Hardware version: V1.3
Software version: APPOLO-D01L01C00G01ENB190213
Manufacturers: Beijing CP Device Technology Co., Ltd.
Manufacturer Address: Room 401, Bldg 30, Wisdomland Park, Natou Gate 2nd Rd, Nanshan District, Shenzhen, China 518052
BT & WIFI:
- Bluetooth Version : V4.0
- 2.4G WIFI: 802.11b/g/n single-band radio
4G module:
- FDD: B2/B4/B12
- WCDMA: B2/B4/B5
- GSM: 850/1900MHz

Ruggedized In-vehicle Tablet User Guide

BT &WIFI:
Bluetooth Version: V4.0
2.4G WIFI: 802.11b/g/n single model name: T100
Trademark: Hi-Target
Hardware version: V1.3
Software version: APPOLO-D01L01C00G01ENB190213
Manufacturers: Beijing CP Device Technology Co., Ltd.
Manufacturers: Room 401, Bldg 30, Wisdomland Park, Natou Gate 2nd Rd, Nanshan District, Shenzhen, China 518052 band radio

USING INSTRUCTION

T100 Series User Manual

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-1

Cable definition

Port 1

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-2

Port 2

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-3

Port 3

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-4

Port 4

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-5

Product Size and bracket installation

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-6

Product Installation

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-7

Use a screw to lock the RAM on the backside of the APOLLO device, the other side of the RAM could be installed per customer requirement.

Product packing list

APOLLO rugged in-vehicle tablet: 1pc
External 4G antenna (Optional): 1pc
External GNSS antenna (Optional): 1pc
User manual: 1pc

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-8

Working environment

Working temperature -30°C-+70° Humidity: 0%-90%RH
Storage temperature: -40°C – +85° Humidity: 30%-95%RH

Attention

Pls do not store/use this device under a flammable and explosive place
Pls, do not self-repair this device, if need any service pis to contact customer service.

FAQ

Hi-Target-T100-Ruggedized-In-Vehicle-Tablet-FIG-9

FCC

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 40cm between the radiator and your body.

FAQ

Q: What should I do if the device is not connecting to Bluetooth or Wi-Fi?
- A: Ensure that the Bluetooth and Wi-Fi settings are turned on in the device’s settings menu. Try restarting the device and check for any software updates that may resolve connectivity issues.
Q: Can I make modifications to the hardware or software of the device?
- A: It is not recommended to make changes or modifications to the hardware or software that are not approved by the manufacturer, as this could void the warranty and affect the device’s performance.