LEHOM G6C Heavy Duty Wire Garment Rack with Gray Oxford Fabric Cover User Manual
- May 15, 2024
- LEHOM
Table of Contents
LEHOM G6C Heavy Duty Wire Garment Rack with Gray Oxford Fabric Cover
Product Information
Specifications
- Model: Garment Rack 6C
- Feature: Space Reorganization Expert
- Material: Metal
- Color: Silver
- Assembly Required: Yes
Frequently Asked Questions
- Q: Are the plastic clips necessary for assembly?
- A: Yes, the plastic clips are essential for securing the shelves onto the poles and ensuring stability.
- Q: Can additional shelves be added to the garment rack?
- A: The garment rack is designed to accommodate the specified number of shelves as per the parts list. Adding extra shelves may affect stability.
Final Assembly Picture Style 1
Note
- Please check and make sure that you have all the parts ready before beginning assembly.
Parts list
Assembly Steps Style 1
Step 1
- Screw Leveling Feet(K) into the bottom of the Lower Poles(D). And then snap one pair of plastics Clips(J) on the same groove of each lower poles.
- Make sure the arrow of all plastic clips should be pointed up, and the groove of plastic clips should be locked with the poles.
Step 2
- Please make sure that you have the Large Shelf(A) the correct way up.
- Hold the shelf on its side and slide it from the top of four lower pole down onto the plastic clips until there is snug fit.
Step 3
- Refer to step 1,2 to snap the plastic clips on the same groove of other four lower poles and assemble the second large shelf, And then set the rack upright.
Step 4
- According to the instruction of the picture, snap plastic clips onto the same grooves of the proper four lower poles at your desired position for the first Small Shelf(B).
- Slide the first small shelf from the top of these four lower poles down onto the plastic clips.
Step 5
- Screw Middle Poles(E) into lower poles by connectors which are already assembled on the middle poles.
- And screw Upper Poles(F) into middle poles by connectors which are already assembled on the upper poles.
Step 6
- Refer to step 4 to snap plastic clips onto the same grooves of the four poles and assemble the second small shelf in the middle of the rack as the picture.
Step 7
- Snap plastic clips onto the same grooves of the proper four poles and assemble the two Support Rails(C)
Step 8
- Refer to step 4 to snap plastic clips onto the same grooves of the four poles and assemble the third and fourth small shelf in the middle of the rack as the picture.
Step 9
- Refer to step ③④ to snap plastic clips onto the same grooves of the proper poles and assemble the other two large shelves at the left and right of the rack as well.
Step 10
- Connect the Long Clothes Hanger Rod(G) with the two assembled support rails by Hook Bracket(H) and Screw(l) as the picture.(3 long clothes hanger rod)
Step 11
- Hang these three long clothes hanger rods respectively onto the two top large shelves at their frames by hook bracket and screw and the middle as the picture.
Step 12
- Pushing firmly down on every shelf at corners by rubber mallet to ensure all the shelves in a place over the plastic clips.
- Screw leveling feet in or out to attain proper leveling. Now the garment rack is already completely assembled.
Step 13
- After assembling, please put the cover on the Garment Rack.
Final Assembly Picture Style 2
Assembly Steps Style 2
Step 1
- Screw Leveling Feet(K) into the bottom of the Lower Poles(D). And then snap one pair of plastics Clips(J) on the same groove of each lower poles.
- Make sure the arrow of all plastic clips should be pointed up, and the groove of plastic clips should be locked with the poles.
Step 2
- Please make sure that you have the Large Shelf(A) the correct way up.
- Hold the shelf on its side and slide it from the top of four lower pole down onto the plastic clips until there is snug fit.
Step 3
- Refer to step 1,2 to snap the plastic clips on the same groove of other four lower poles and assemble the second large shelf, And then set the rack upright.
Step 4
- According to the instruction of the picture, snap plastic clips onto the same grooves of the proper four lower poles at your desired position for the first Small Shelf(B).
- Slide the first small shelf from the top of these four lower poles down onto the plastic clips.
Step 5
- Screw Middle Poles(E) into lower poles by connectors which are already assembled on the middle poles.
- And screw Upper Poles(F) into middle poles by connectors which are already assembled on the upper poles.
Step 6
- Refer to step 4 to snap plastic clips onto the same grooves of the four poles and assemble the second and the third small shelf at the left of the rack as the picture.
- Snap plastic clips onto the same grooves of the proper four poles and assemble the two Support Rails(C) at the right of the rack as the picture.
Step 7
- Refer to step ③④ to snap plastic clips onto the same grooves of the proper poles and assemble the large shelf at.
Step 8
- Refer to step ③④ to snap plastic clips onto the same grooves of the proper poles and assemble the small shelf at the left of the rack.And assemble the large shelf at the right of the rack as the picture.
Step 9
- Connect the Long Clothes Hanger Rod(G) with the two assembled support rails by Hook Bracket(H) and Screw(l) as the picture.(3 long clothes hanger rod).
Step 10
- Hang these three long clothes hanger rods respectively onto the two top large shelves at their frames by hook bracket and screw and the middle as the picture.
Step 11
- Pushing firmly down on every shelf at corners by rubber mallet to ensure all the shelves in a place over the plastic clips.
- Screw leveling feet in or out to attain proper leveling. Now the garment rack is already completely assembled.
Step 12
- After assembling, please put the cover on the Garment Rack.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>