LEHOM G3 Garment Rack User Manual

LEHOM G3 Garment Rack

Final Assembly Picture

Note
Please check and make sure that you have all the parts ready before beginning assembly.

Parts list

Step 1

Screw the Leveling Feet(13) into the bottom of six poles. Then snap one

pair of Plastic clips(2) on the groove of the lower pole (as the picture shows). Make sure the arrow of all plastic clips should be pointed up, and the groove of plastic clips should be locked with the poles.
Step 2

Screw the Leveling Feet(13) into the bottom of six poles. Then snap one pair of Plastic clips(2) on the groove of the lower pole (as the picture shows). Make sure the arrow of all plastic clips should be pointed up, and the groove of plastic clips should be locked with the poles. Please make sure that you have the Large Shelf(12) the correct way up. Hold the shelf on its side and slide it from the top of the four lower poles down onto the plastic clips until there is a snug fit.

Assemble Method 1

Step 3

Refer to steps 1 and 2 to snap the plastic clips on the same groove of two poles on the large shelf(12) and assemble the small shelf(5). And then set the rack upright.

Step 4
Screw the other poles on the assembled poles(Step3) by connectors(11). Repeat this step that four poles to build up one long pole.

Step 5
Snap the plastic clips(2) on the same groove of the poles on the small shelf(5) and slide the second small shelf(5) from the top of the poles onto the plastic clips. Then snap the plastic clips(2) on the same groove of the poles on the large shelf(12) and slide the support rail(9) on the plastic clips. These Shelf and Support rails can be adjustable randomly.

Step 6
Refer to step1 to snap the plastic clips(2) onto the same groove of the poles and assemble the last small shelf(5), and the last large shelf(12) at the the right of the top as well. Snap the plastic clips(2) on the two left poles and slide the support rail with hooks(1) on it.

Step 7
Assemble the Hook bracket(7) at the left and right of the Long clothes hanger rod(10) and the Short clothes hanger rod(3) by Screw(6). And hang the long hanger rod(10) under the top large shelf(12) and between the support rails(9),
and hang the short hanger rod(3) under the top small shelf(5).

Step 8
Put the plastic cap(6) on the top of the poles. Pushing firmly down on every shelf at corners by rubber mallet to ensure all the shelves are in place over the plastic clips(2). Screw levelling feet(13) in or out to attain proper levelling. Now the
The garment rack is already completely assembled.

Step 9
For the sake of safety, be sure to fasten the garment rack to the wall with the anti-tip devices included in the package.

Assemble Method 2

Can be assembled into a clothing rack and a shelf at the same time.

Step 1

Note
Six poles have bottom feet (15) installed already, just install the Leveling Feet (13). The other two Poles need to be installed bottom feet (15) and then the Leveling feet (13).

Step 2

Please make sure that you have the Shelf way up correctly. Hold the shelf on its side and slide it from the top of the four lower poles down onto the plastic clips until there is a snug fit.

Step 3
Put the plastic cap(6) on the top of the poles.

Step 4
Pushing firmly down on every shelf at corners by rubber mallet to ensure all the shelves are in place over the plastic clips(2). Screw levelling feet(13) in or out to attain proper levelling. Now the clothing rack and shelf are already completely
assembled.

Copyright® Shenzhen Qianhaiyi Network
Technology CO., Ltd All Rights Reserved
Address: Longhua, Shenzhen, China
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>