Ksports KSU9005 Rebounder Net Blue Regular Instruction Manual

: May 15, 2024
: KSPORTS

Table of Contents

Parts List
Assembly Instruction
NOW YOU’RE READY FOR RACKET SPORTS ACTION!
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ksports KSU9005 Rebounder Net Blue Regular Instruction Manual

CAUTIONS:

Please use adult supervision & strictly follow these instructions during set up & use
Ensure there is no obstruction & do not stand behind the net when others are using it.
Treat this product with care and it will serve you well.
Carefully check the net & frame before each use
During use, please position yourself in the center & directly in front of the net.
Exercise usual sports safety precautions as failure to do so may result in injury or damage to property

Parts List

A. Base legs x 2
B. Lower horizontal bar x1
C. Vertical poles x 2
D. Lower diagonal bars x 2
E. Upper diagonal bars x 2
F. Comer units x 2
G. Upper horizontal bar x 1
H. Swivel board x 1
J. Knobs & washers x 2
K. Net (36in x 85in) x 1
L. Net guides x 2
M. Bungee loops x 10; plus spares x 4
N. Cary bag
P. Instruction manual
Q. Height extensions x 2

Assembly Instruction

Step 1: Connect both base legs (A) by inserting the ends of the lower horizontal bar (B) into the horizontal outlets of base legs (A) until the locking pins engage in place.

Step 2: Connect the vertical poles (C) by inserting them into the vertical outlets of the base legs (A)

Step 3: Altach the lower diagonal bars (D) try insering the vertical poles (C) into the vertical connection outlets of the lower diagonal bars (D)

Step 4: Connect the upper comer units (F) by inserting the appropriate ends into the connection outlets of the upper diagonal bars(E).

Please note the left comer uit is labelled and the right comer ani! is labelled

Step 5: Attach the upper diagonal bars with comer units (E+F) by inserting them into the connection outlets of the lower dagonal bars (D

Step 6: Mount the swivel board (H) using the screw knobs & associated washers (J) as pictured here.
Assembly Instruction

Step 7: Prepare the Net

7.1: Tie up all the 10 bungee (M) loop net fasteners, one to each of the 10 holes of the net (there should be 4 spare bungee loops).

7.2-7.5: Insert the upper horizontal bar through the top of the net (K) if necessary and connect it to each end of the comer units (F).
Assembly Instruction

Step 8: Strap up the net between the holes and anchor points along the frame using the bungee loops as shown in the pictures here – positions A, B, C, D & E. The Bungee loops should be strapped around the bars to obtain the correct tension on the net.
Assembly Instruction

Default strappings for general use:
A, B, C, D & E: All 5 bungee loop positions should be strapped under the bars as shown in the pictures 8.1-8.3.
Assembly Instruction

Strappings for different racket sports for more advanced users:
For more advanced users, strap bungee loops under the bar for positions A & B. The 2 bungee loops of positions C & D can be tied either above or below the bars to achieve the correct timing between shots for each racket sports practice. Please refer to the table here for different racket sports & pictures of strappings over the bar 8.4-8.6.

For tennis it is best to strap positions B & E as loose as possible 8.7-8.8. Insert the anchor nail through the laop between the round adjuster and the end of the cord.
Assembly Instruction

Strapping Positions for different racket sports (either above or below the bar)

Step 9: Strap up the triangular net guides(L) on either side of the net at the top. Secure them with hook & loop attachments. These are useful for practising certain spin shots in that they prevent the balls from spinning off the nets.

Step 10 (optional): To extend height by 6 inches, use the height extensions (Q) with vertical poles (C) in Step 2.

NOW YOU’RE READY FOR RACKET SPORTS ACTION!

Disassembly

Disassembly: For disassembling the racket sports rebounder, please perform the above steps in reverse order-step 9 to step 1.

For video assembly instructions-

Please visit https://www.kathysuniverse.com/pages/rebounder
Or scan the QR code on this page.
For joining our product testers community-
Please visit our website at www.kathysuniverse.com

In case of any problems, please either call us at (985) 690-0828 or write to us at customerservice@kathysuniverse.com, including your order & model number and a photo of the problem, we will respond to you within 12 hours.

Ksports Logo